Materials, Volume 11, Issue 7

Vancomycin is the treatment of choice for infections caused by methicillin-resistant Staphylococcus aureus (MRSA). Clinically, combinations of vancomycin (VAN) and beta-lactams have been shown to improve patient outcomes compared to VAN alone for the...

Equal channel angular pressing (ECAP) and multi-axial compression deformation (MAC) are severe plastic deformation (SPD) processes that produce bulk nanostructured materials with ultrafine grains. The grains could be observably refined by multi-pass...

The present work proposes a novel manufacturing technique based on the combination of Laser Metal Deposition, Laser Beam Machining, and laser polishing processes for the complete manufacturing of complex parts. Therefore, the complete process is base...

In order to enhance the tribological performance of YT14 carbide, pure Zr coating was deposited on the substrate surface using a multi-arc ion plating method. The surface topography, adhesion strength, thickness, and micro-hardness of the Zr coating...

In this study, an ultra-broadband dielectric-resonator-based absorber for microwave absorption is numerically and experimentally investigated. The designed absorber is made of the carbon-loaded Acrylonitrile Butadiene Styrene (ABS) polymer and fabric...

Different-shaped ultrafine MoNbTaW high-entropy alloy powders were firstly prepared by a convenient mechanical alloying method. The phase composition and microstructure of the powders were characterized. The powders are ultrafine with nano-sized grai...

This paper is a Part I of a literature review documentation describing the currently available and used techniques that are being explored by material scientists and researchers in the field of materials characterizations and testing for both thermal...

The microsegregation behavior of alloy filler metal 52 (FM 52) was studied using microprobe analysis on two different solidification processes. First, microsegregation was characterized in samples manufactured by directional solidification, and then...

P-type binary copper oxide semiconductor films for various O2 flow rates and total pressures (Pt) were prepared using the reactive magnetron sputtering method. Their morphologies and structures were detected by X-ray diffraction, Raman spectrometry,...

Local corrosion damage of steel structures can occur due to damage to the paint-coated surface of structures. Such damage can affect the structural behavior and performance of steel structures. Compressive loading tests were, thus, carried out in thi...