In this work, we present the fabrication of low-cost, stable nanocellulose colloidal suspensions with an average particle size of approximately 160 nm, produced via a straightforward, solvent-free ultrasonication process that eliminates the need for...
In this study, a lignin-based polyacid catalyst was synthesized via two steps to enhance water resistance of urea–formaldehyde (UF) resins. The first steps involved a hydroxymethylation reaction to increase the hydroxyl content in lignin. Then,...
The high-efficiency development and utilization of bamboo resources can greatly alleviate the current shortage of wood and promote the neutralization of CO2. However, the wide application of bamboo-derived products is largely limited by their unideal...
Urea–formaldehyde (UF) resin is the most widely used adhesive resin. However, it is necessary to improve its flame-retardant performance to expand its applications. In this study, exploiting electrostatic interactions, anionic phytic acid and c...
The structural changes during three-step synthesis of low-molar ratio urea–formaldehyde (UF) resin were tracked by quantitative 13C nuclear magnetic resonance (13C NMR) analysis and electrospray ionization-mass spectrometry (ESI–MS). Cond...
Due to its multiple amino groups, triethylenetetramine (TETA) can be used as an effective formaldehyde scavenger contributing to the reduction in formaldehyde emission from plywood. This study aimed to evaluate the effect of small TETA loadings on th...
To promote the performance of fast-growing poplar wood for furniture applications, this study proposes and investigates the feasibility of modifying fast-growing poplar wood with a urea-formaldehyde resin impregnating agent by adding nano-SiO2 as a w...
TG-FTIR and PY-GC/MS were used to analyze the pyrolysis behaviors of pine wood, urea-formaldehyde resin (UF resin) and their blended pellets. The pyrolysis process was divided into three stages: water evaporation, devolatilization and pyrolysis resid...
Using formaldehyde and urea as raw materials, a stable urea–formaldehyde resin (UF) is synthesized by the “alkali-acid-alkali” method. Unlike most thermosetting resins, UF often shows the appearance of crystal domains. In order to understand the rela...
In this research, a urea–formaldehyde (UF) resin was modified with nanocrystalline cellulose (NCC) and nanofibrillated cellulose (CNF), and the properties of the modified resin were comprehensively evaluated by combining the techniques of infra...
The potential of ammonium lignosulfonate (ALS) as an eco-friendly additive to urea–formaldehyde (UF) resin for manufacturing high-density fiberboard (HDF) panels with acceptable properties and low free formaldehyde emission was investigated in this w...
Recycling wood-based panels is essential for promoting the cascading use of wood, advancing the transition to a circular economy, and maximizing the efficient use of natural resources. While recycling particleboard has become a well-established indus...
This paper reports a comparison of adhesion behavior of urea-formaldehyde (UF) with those of melamine-urea-formaldehyde (MU) resins in bonding wood by analyzing the results published in literatures. For this purpose, the adhesion behavior of UF resin...
The objective of this research was to provide a useful approach of polymer synthesis for accelerating the fast cure of phenol-urea-formaldehyde (PUF) resin as wood adhesive by optimizing its structure and composition. The PUF resins containing high c...
Urea-formaldehyde resin (UFR), a thermosetting resin, is used to prepare ultrafiltration membranes because of its excellent mechanical properties and filtration performance. Herein, a porous ultrafiltration membrane is prepared by coating a mixture o...
Microcapsules have received a great deal of attention from researchers due to their excellent properties, and are commonly prepared by interfacial and in situ polymerisation methods. In situ polymerisation is an important method of microcapsule prepa...
Traditional low-density polyethylene (LDPE) film causes environmental pollution; there is a pressing need to make new bio-based polymers for alternative products, to meet agricultural production needs and for sustainable ecological development. In th...
In this study, environmentally friendly flame retardants capable of efficient flame retardancy at low concentrations in wood were developed. Urea-formaldehyde (UF) resin and guanidinium azole (GZ)-phytate (PA)-copper hydroxide (Cu(OH)2) flame-retarda...
In thermal conversion utilization, nitrogen-rich biomass such as waste wood-based panels will release a large amount of NOx into the atmosphere, causing serious harm to the surroundings. By means of co-pyrolysis, N in waste wood-based panels can be f...
Nano-SiO2 is a typical modifier used for urea-formaldehyde (UF) resins to balance the reduced formaldehyde content and maintain bond strength. However, the microstructure of UF resin and the interaction between UF resin and nano-SiO2 are microscopic...
Lost circulation has become one of the important problems restricting the speed and efficiency of oil and gas drilling and production. To address severe drilling fluid losses in high-temperature fractured formations during deep/ultra-deep well drilli...
To expand the application range of fast-growing poplar, a modification method of poplar impregnated with nano-SiO2 and urea-formaldehyde resin was proposed in this study. Taking the mass ratio of nano-SiO2 mass to the solid content of urea-formaldehy...
In this research, the special effects of graphene oxide nanoparticle charging (0, 2, 4, 6, wt.%) on the properties of medium-density fiberboard were examined. Physical and mechanical properties of the panels were determined conferring the method of E...
Urea-formaldehyde (UF) resins are the most used resins in the wood industry due to high reactivity and low price. However, their reduced stability during storage is a drawback, imposing strict limits in terms of allowable shipping distances and stora...
To broaden the applications of wood, it is necessary to prepare flame-retardant coatings that can protect wood substrates during combustion. In this study, a bio-based, intumescent, flame-retardant phytic acid–melamine polyelectrolyte (PM) was...
Techniques in resin blending are simple and efficient method for improving the properties of polymers, and have been used widely in polymer modification field. However, polymer latex blends such as the combination of latexes, especially the latexes w...
The wettability, bonding strength and flexibility of modified melamine–urea–formaldehyde resin adhesive with hydroxymethyl lignin (LMUF) were investigated. Moreover, the curing performance, thermal properties and chemical structure of LMU...
The goal of this study is to employ bio-based dialdehyde starch (DAS), derived from in situ polymerization and the resultant microphase separation structure, to improve the strength of melamine–urea–formaldehyde (MUF) resin, as well as en...
This study investigates how poly (vinyl alcohol) (PVA) influences melamine–urea–formaldehyde (MUF) resin, particularly regarding tensile properties, bonding strength, water resistance, curing temperature, chemical structure, and microscop...
Soybean protein hydrolysate, melamine, urea, and concentrated formaldehyde were used to synthesize an environmentally friendly soybean protein-melamine-urea-formaldehyde (SMUF) co-condensation resin. (NH4)2SO4, (NH4)2HPO4, (NH4)2HPO4 + (NH4)2SO4, (NH...
Recent research has focused on developing environmentally friendly flame-retardant coatings to improve the fire resistance of wood. In this study, phytic acid–guanazole (PG), a dual-functional compound synthesized through an ionic reaction betw...
Coatings can achieve the property of changing color with temperature variations by adding thermochromic microcapsules, which can bring a variable surface to the substrate. Ultraviolet ray (UV)-cured primers have the advantages of a fast curing rate,...
The purpose of the present study is to offer an optimal model to predict the tensile index of the paper being consumed to make veneer impregnated with different weight ratios of modified starch (from 3.18 to 36.8%) to urea formaldehyde resin (WR) con...
By focusing on the disadvantages of weak water resistance and high formaldehyde emission of urea–formaldehyde resin (UF), this research provides a new method to overcome these shortages of UF resin by using tannin for partial substitution of ur...
Soy flour was partly substituted for urea-formaldehyde (UF) resin with different content to investigate its effect on formaldehyde emission in three-layer plywood panels. In each square meter of panels, 300 g of resin was used (wet weight basis of re...
The performance of urea-formaldehyde (UF) resin and its formaldehyde emission is a natural contradiction. High molar ratio UF resin performance is very good, but its formaldehyde release is high; low molar ratio UF resin formaldehyde release is reduc...
The aim of the presented research was to determine the suitability of both non-modified and modified buckwheat husk (BH) as a filler for urea–formaldehyde adhesive in plywood production. The effect of two modification methods, acetylation and s...
In order to self-repair the cracks of waterborne coatings on Basswood at room temperature, with fluororesin and waterborne coatings embedded in the shell structure of urea formaldehyde (UF) resin, the microcapsules were fabricated via in-situ polymer...
The purpose of this study was to evaluate the feasibility of using magnesium and sodium lignosulfonates (LS) in the production of particleboards, used pure and in mixtures with urea-formaldehyde (UF) resin. Polymeric 4,4′-diphenylmethane diisocyanate...
Urea–formaldehyde resin was used as a wall material and Toddalia asiatica (L.) Lam extract was used as a core material to prepare urea–formaldehyde resin-coated Toddalia asiatica (L.) Lam extract microcapsules (UFRCTEMs). The effects of U...
Recent studies on microencapsulated self-healing cementitious materials have primarily focused on the particle size and preparation methods of the microcapsules. However, there has been limited attention paid to the microscopic aspects, such as the s...
Surface cracking is a major issue in amino resin-based flame-retardant coatings, which can be reduced by mixing flexible resins into the coatings. In this study, flexible waterborne polyurethane (WPU) was added into a melamine-modified, urea-formalde...
Low-cost urea formaldehyde resin (UF)/reactive halloysite nanotubes (HNTs) nanocomposite adhesive was prepared successfully via in situ polymerization. The HNTs were modified to improve its compatibility with polymer. The XRD and FTIR results showed...
Dental resin composites are widely used in clinical settings but often face longevity issues due to the development and accumulation of microcracks, which eventually lead to larger cracks and restoration failure. The incorporation of microcapsules in...
Towards the creation of a long-lasting and high-performing glulam-product, the optimization of melamine–urea–formaldehyde (MUF) adhesive solutions in order to be in line with worldwide trends of building and cutting-edge material science...
This work reports a study on the structural characterization, evaluation of thermal stability, and non-isothermal decomposition kinetics of urea–formaldehyde (UF) resin modified with hydrochar (obtained by the hydrothermal carbonization of spen...
This work is aimed at the development of innovative, easy and cheap methods for the stabilization, inertization and valorisation of the organic fraction of municipal solid waste (OFMSW). For the first time, two original processes for transforming the...
In order to reduce the cost of plywood and save edible resources (wheat flour), a cheap and resourceful clay, sepiolite, was used to modify urea formaldehyde (UF) resin. The performances of filler-filled UF resins were characterized by measuring the...
Profile control is widely employed to improve oil recovery in fractured-vuggy carbonate reservoirs. However, the limitation of current experimental evaluation methods restricts their practical guidance for field applications. In this study, urea-form...
In this study, some physical properties; the thickness swelling, water absorption, surface absorption, formaldehyde emission, and some mechanical properties; internal bond strength, bending strength, bending modulus, and surface soundness of the MDF...
of 5