A configuration of a refractometer sensor is described with the aim of optically detecting the crystallization process of paracetamol. The developed sensing head is based on a conventional cleaved multi-mode fiber. The fiber tip sensor structure was...
We herein present a weakly-coupled double bow-tie multi-ring elliptical core multi-mode fiber (DBT-MREC-MMF) supporting 22 eigenmodes for mode division multiplexing across the C+L+U band. The proposed fiber introduces a multi-ring elliptical core, bo...
The advent of fiber optic technology in geophysics exploration has grown in its use in the exploration, production, and monitoring of subsurface environments, revolutionizing the way data are gathered and interpreted critically to speed up decision-m...
In this paper, we propose a radio over fiber transmission system with simultaneous wireless multi-mode operation based on multi-wavelength optical comb and pulse shaping. This study is an initial attempt to accomplish simultaneous wireless multi-mode...
Multi-mode fiber (MMF) is used in a polarization-sensitive optical time domain reflectometer (OTDR) for vibration event location and spectrum analysis. The vibration events acting on MMF are considered to be the optical polarization state and phase d...
Diode-pumped multi-mode graded-index (GRIN) fiber Raman lasers provide prominent brightness enhancement both in linear and half-open cavities with random distributed feedback via natural Rayleigh backscattering. Femtosecond laser-inscribed random ref...
An investigation on the feasibility of utilizing Mode Division Multiplexing (MDM) for simultaneous measurement of Surrounding Refractive Index (SRI) and temperature using a single sensor element based on an etched OM4 Graded Index Multi Mode Fiber (G...
In optical fiber communication, recent advances in multiple-input and multiple-output (MIMO) systems using space-division multiplexing have helped achieve higher spectral efficiency and data rates. Propagating higher-order modulation formats over MIM...
Substantial improvements in the performance of optical interconnects based on multi-mode fibers are required to support emerging single-channel data transmission rates of 200 Gb/s and 400 Gb/s. Future optical components must combine very high modulat...
This study successfully applied multi-mode laser cutting with the variation of the laser cutting speed to cement mortar for the first time. The effects of the amount of silica sand in the cement mortar on laser cutting are tested and analyzed. The ke...
Cement-based materials are the most prevalent construction materials, and the conventional cutting techniques are still mostly used for fabricating the materials. However, these conventional cutting methods could generate undesirable micro-cracks and...
This work presents an alternative fast and simple method for the design of a refractive index profile of silica multimode optical fibers (MMFs) with extremely enlarged core diameters of up to 100 µm for laser-based multi-gigabit short-range opt...
We propose a vector bending sensor based on a tapered few-mode multi-core fiber (FM-MCF). A seven-core six-mode fiber is tapered with an optimized taper ratio, enabling bending sensing through power monitoring. When the tapered FM-MCF bends, coupling...
In this paper, a trench-assisted low-bending-loss large-mode-field-area multi-core fiber with air hole is proposed, which can achieve dual-mode transmission. The influence of structural parameters on fiber performance is analyzed systematically, and...
We demonstrate the use of laser diodes and multijunction photovoltaic power converters to efficiently deliver watts of electrical power for long-distance or cryogenic applications. Transmission through single-mode and multi-mode fibers at the wavelen...
Chromatic dispersion is an important fiber attribute affecting transmission performance over optical fibers. Various chromatic dispersion measurement methods have been developed primarily for single-mode fibers. In the literature, measurement techniq...
In this paper, the errors of the displacement measurement interferometer with multi-mode fiber-coupled delivery are analyzed when the fibers are disturbed. Simulation results show that the characteristic frequency of the measurement error is consiste...
Polymer optical fibers (POFs) have been proposed for optical strain sensors due to their large elastic strain range compared to glass optical fibers (GOFs). The phase response of a single-mode polymer optical fiber (SM-POF) is well-known in the liter...
We propose and demonstrate an effective and simple multi-wavelength spatiotemporal mode-locked (STML) laser. The laser introduces a multimode interference (MMI) effect using the core diameter mismatch of the fibers, thus enabling simultaneous mode-lo...
Taking non-contact temperature measurements in narrow areas or confined spaces of non-uniform surfaces requires high spatial resolution and independence of emissivity uncertainties that conventional cameras can hardly provide. Two-color optical fiber...
Single-mode (SM) vertical-cavity surface-emitting lasers (VCSELs) have often been demonstrated with an unusually long transmission reach at very high data rates while today’s multimode VCSEL transmission has been limited by the fiber modal band...
The multiple-input and multiple-output (MIMO) technology is a promising area of research to cope up with the demands of higher data rates and capacity. In the optical communication domain, the combination of space-division multiplexing (SDM) with hig...
Tunable fiber lasers have the advantages of good beam quality, high integration, and adjustable output wavelength, and they are widely used in fields such as optical fiber communication and optical fiber sensing. The fiber filter is one of the key co...
In this research, we proposed and experimentally verified a compact all-fiber sensor that can measure refractive index (RI) and temperature simultaneously. Two segments of hollow-core fiber (HCF) are connected to the two ends of the four-core fiber (...
The results of an experimental investigation on the physical and chemical characteristics of cement-based materials under laser interactions are presented. The laser cutting tests were conducted using a multi-mode continuous fiber laser with a laser...
A grating-less fiber vector bend sensor is demonstrated using a standard single mode fiber spliced to a multimode fiber as a multimode interference device. The ring-shaped light intensity distribution at the end of the multimode fiber is subject to a...
This paper aims to pave the way towards the demonstration of spatiotemporal similariton pulses’ evolution in passive multimode fibers with Raman amplification. We numerically present this issue in graded-index and step-index multimode fibers and prov...
Motion sensing, aimed at detecting and monitoring mechanical deformation, has received significant attention in various industrial and research fields. In particular, fiber-structured mechanical strain sensors with carbon-based materials have emerged...
A fiber based refractometer in a reflective interrogation scheme is investigated and optimized. A thin gold film was deposited on the tip of a coreless fiber section, which is spliced with a single mode fiber. The coreless fiber is a multimode wavegu...
Light propagation in multimode fibers is known to experience various nonlinear effects, which are being actively studied. One of the interesting effects is the brightness enhancement at the Raman conversion of the multimode beam in graded index (GRIN...
Magnetic field sensing based on magnetic-fluid-clad multimode-singlemode- multimode fiber structures is proposed and experimentalized. The structures are fabricated out using fiber fusion splicing techniques. The sensing principle is based on the int...
(1) Background: The objective of this in vitro study was to evaluate the impact of different etching times and ethanol pre-treatments on the immediate bond strength of a hydrophilic multi-mode universal adhesive (Clearfil Universal Bond Quick, Kurara...
A multimode optical fiber supports excitation and propagation of a pure single optical mode, i.e., the field pattern that satisfies the boundary conditions and does not change along the fiber. When two counterpropagating pure optical modes are excite...
In this paper, we propose an optical fiber-based broadband mode coupler for multimode optical coherence tomography (OCT) in the O-band (1.26–1.36 μm). The proposed device uses a tapered few-mode fiber (FMF) to lower the effective mode index...
In this work, we report on the fabrication and testing of a fiber optics sensor based on multimodal interference (MMI) that is capable of measuring sugar concentration in aqueous solutions. The sensor has a simple structure, built by splicing a segme...
It is shown that it is possible to couple a laser beam and its frequency-doubled daughter into a multimode optical fiber through the four-wave mixing nonlinear process and generate a new wavelength. The frequency-doubled daughter can be generated in...
A variety of specialty fibers such as no-core fiber (NCF) have already been studied to reveal their sensing abilities. In this work, we investigate a specialty fiber, square-core fiber, for temperature and strain sensing. A simple single-mode–multimo...
We experimentally address simple, low-cost and effective methods for the cleaving of multimode CYTOP optical fibers using razor blades. The quality of fiber end-face preparation depends on various parameters. The necessity of the near-field intensity...
Optical fibers have been used to probe various tissue properties such as temperature, pH, absorption, and scattering. Combining different sensing and imaging modalities within a single fiber allows for increased sensitivity without compromising the c...
A theoretical model for studying the temperature properties of singlemode-multimode-singlemode (SMS) fiber structure fabricated by absorptive multimode fiber (MMF) cladding is established. Moreover, an SMS-based temperature sensor is fabricated and e...
Fiber-optic interferometric sensors based on graded-index multimode fibers have very high refractive-index sensitivity, as we previously demonstrated. In this paper, spatial-frequency multiplexing of this type of fiber-optic refractive index sensors...
A torsion sensor with directional discrimination based on a single-mode–twisted multimode–single-mode (STMS) fiber structure is demonstrated. The STMS fiber structure is fabricated by fusion-splicing a segment of multimode fiber (MMF) bet...
We report the spatial beam self-cleaning in bi-tapered conventional multimode fibers (MMFs) with different tapered lengths. Through the introduction of the bi-tapered structure in MMFs, the input beam with poor beam quality from a high-power fiber la...
A relative humidity (RH) fiber optic sensor is demonstrated based on the multimode interference (MMI) phenomenon utilizing a no-core fiber (NCF) coated with polyvinyl alcohol (PVA). The sensor’s structure is simple and consists of a section of...
We present our recent experimental results on the pulsed regimes of Raman conversion of highly multimode laser diode (LD) pump radiation into the 1st and higher order Stokes radiation in multimode graded-index fibers. Three different linear cavities...
Multimode fibers (MMF) are promising candidates to increase the data rate while reducing the space required for optical fiber networks. However, their use is hampered by mode mixing and other effects, leading to speckled output patterns. This can be...
Conventional single-mode fiber (SMF) Brillouin optical time-domain reflectometry (BOTDR) suffers from a low signal-to-noise ratio (SNR) and severe sensing reliability due to the influence of the stimulated Brillouin scattering threshold and bend loss...
We present a technique that utilizes cascaded resonant cylindrical piezoelectric ceramics and multimode optical fibers wound around them to effectively mitigate laser speckle. By precisely driving the ceramics at their resonant frequencies and induci...
Speckle-free imaging using a multimode fiber has been widely used for imaging systems. Generally, previous work has assumed that all the propagating modes of the fiber are uniformly excited, but the modal power distribution is actually affected by ex...
We review our recent experimental results on the cascaded Raman conversion of highly multimode laser diode (LD) pump radiation into the first- and higher-order Stokes radiation in multimode graded-index fibers. A linear cavity composed of fiber Bragg...
of 12