2,489 Results Found

Manganese and Fe have similar geochemical properties in the supergene environment. Separation of Mn and Fe is an important process for the formation of high-grade sedimentary manganese deposits. Large-scale manganese carbonate deposits (total reserve...

The Guodian Fe deposit is representative of the newly discovered Qihe–Yucheng high-grade Fe skarn ore cluster, Luxi Block, eastern North China Craton (NCC). The age of the Pandian Fe deposit remains elusive, which hinders the understanding of i...

The Emeishan Large Igneous Province (ELIP) is one of the largest igneous provinces, containing some of the world’s richest mineral resources. It mainly comprises magmatic Fe-Ti-V deposits and Cu-Ni sulfide deposits, with minor subvolcanic-type...

The Kletno deposit in the Śnieżnik Massif (Central Sudetes, SW Poland), mined for Fe, U, Ag, Cu, fluorite, and marble through the ages, developed at the contact of marbles and orthogneiss. Here, we present a new Fe-Ti-V-ore (containing up to 14.07 wt...

The Huanggangliang deposit is a super-large Sn-Fe deposit in the Huanggangliang–Ganzhuermiao metallogenic belt in the southern section of the Great Hinggan Range. The Sn-Fe deposits mainly occur in the skarn contact zone and were formed via the...

The Makeng iron deposit in southwest Fujian is a significant iron polymetallic deposit containing various types of iron ore, including garnet magnetite, diopside magnetite, and quartz magnetite. The metallogenetic type of the deposit has been a subje...

The large Xinqiao Cu–S–Fe–Au deposit in the Tongling ore district, Eastern China, is characterized by a large-scale stratiform orebody, in which garnet is widely distributed as the main gangue mineral associated with mineralization. Xinqiao garnet ca...

The Beizhan iron deposit (468 Mt at an average grade of 41% Fe) is the largest iron deposit in the Awulale iron metallogenic belt of Western Tianshan, northwest China. The high-grade magnetite ores are hosted in the Carboniferous volcanic rocks with...

The current work investigates the impact of magmatic fluids and metasomatic processes on the Yolindi Cu-Fe skarn deposit in the Biga Peninsula, Turkey. It traces the stages of skarn evolution, from prograde to retrograde alterations, and investigates...

The Yong’an-Meixian Late Paleozoic Hercynian depression, located in western Fujian-eastern Guangdong, is an important metallogenic belt in China. The Yushui copper-polymetallic massive sulfide deposit from the middle part of the depression, wit...

Fe-Mn carbonate is the dominant mineral in the Erdaokan Ag deposit, which represents the first large independent silver deposit during the Late Triassic Period in the Duobaoshan Cu-Mo-Au mineralization concentrated area of Heilongjiang Province, NE C...

The gliding arc plasma technique (glidarc) was used for the precipitation and deposition of Mn or Fe oxides on zirconia fibers. Two types of fibers were used: commercial (Fib Zr(C)) and biomorphic (Fib Zr(B)) ZrO2 fibers, the latter produced using co...

The Baiyun gold deposit is a medium-sized deposit in northeastern Hubei around the southern margin of the Tongbai-Dabie metallogenic belt. However, its genesis has not been determined. The metallogenic process of the Baiyun gold deposit can be divide...

The Kultuma deposit is among the largest and most representative Au–Cu–Fe–skarn deposits situated in Eastern Transbaikalia. However, its genetic classification is still a controversial issue. The deposit is confined to the similarly...

In order to reveal the formation mechanism of different garnets and its implications for the fluid evolution in the Laoshankou Fe-Cu-Au deposit in the northern margin of East Junggar (NW China), three types of garnet have been investigated in detail...

Hydrothermal processes have played a significant role in rare earth element (REE) precipitation in the Bayan Obo REE-Nb-Fe deposit. The poor preservation of primary fluid inclusions and superposition or modification by multiphase hydrothermal activit...

The Qingshan lead–zinc deposit is one of the typical deposits in the Weining–Shuicheng metallogenic belt in the northwest Guizhou mining area. This deposit is strictly controlled by tectonics, making it highly distinctive. This study used...

We report on the application of the U-Th-He method for the direct dating of pyrite from the alteration halo of the Novogodnee-Monto Au-Fe-skarn deposit, Polar Urals. The deposit is genetically related to the formation of volcanogenic complexes of the...

Bacteria classified in species of the genus Leptothrix produce extracellular, microtubular, Fe-encrusted sheaths. The encrustation has been previously linked to bacterial Fe oxidases, which oxidize Fe(II) to Fe(III) and/or active groups of bacterial...

Corrosion inhibiting conversion coating formation is triggered by the activity of micro-galvanic couples in the microstructure and subsequent local increase in pH at cathodic sites, which in the case of aluminium alloys are usually intermetallics. Ce...

The FeS solid lubricating coatings were prepared on the AISI 5140 steel by chemical bath deposition (CBD) coating technique at various temperatures from 30 to 90 °C. The influence of temperature on microstructure, microcracks, and tribological pr...

Skarn Sn-polymetallic deposits, located in the southern Great Khingan Range, can be divided into Sn–Fe and Sn–Pb–Zn deposits. By systematically studying the geochemical characteristics of source granitoid and deposits, the ore-formi...

Deposition parameters determine the characteristics of semiconductor films in electrodeposition. Thus, it is essential to understand the effect of deposition parameters on the electrodeposited film for fabricating suitable semiconductor film fitting...

A set of samples with different textures from the sedimentary Fe–Ni deposits of Central Euboea, Greece, were studied with XRD and SEM-EDS to investigate the relationships between phyllosilicates present. The deposits are characterized by the co...

The suitability of the direct energy deposition process of exothermic powders Fe-Ti in joining dissimilar metals to produce small parts of a complete shape for various applications is considered. The procedure of the direct energy deposition of comme...

Ultrathin magnetic materials with room-temperature ferromagnetism/ferrimagnetism hold great potential in spintronic applications. In this work, we report the successful controllable growth of Fe3O4 thin films using a facile chemical vapor deposition...

Results of XRD and TEM studies of a metastable phase state in Fe73Ti5B19O3 and Fe55Ti16B27O2 films, which is formed upon magnetron deposition under preset conditions, and of the evolution of the state in the course of subsequent annealing at 500 °...

As electromagnetic functional materials, soft magnetic composites (SMCs) have great potential for applications in high-energy electromagnetic conversion devices. The most effective way to optimize the performance of an SMC is to incorporate it into i...

AlCoCrFeNi coatings were electrospark-deposited (ESD) on H13 steel substrates, and their nano-mechanical and tribological properties under a load of 2 N, 4 N, 6 N, 8 N, and 10 N were investigated by utilizing a nanoindentation instrument and a recipr...

The Fe/Zr composite coating was prepared by duplex Fe/Zr ion implantation and deposition to modify the microstructure and corrosion behavior of Mg-5.5 Zn-0.6 Zr (in wt.%, ZK60) alloy. The surface and interface characteristics were investigated using...

The effects of different ratios of 410L alloy and Fe–Cr–B–Si–Mo alloy powders on the microstructure and mechanical properties of laser cladding-deposited ferrous alloys were investigated. The experimental results revealed that...

The development of two-dimensional (2D) materials has gained significant attention due to their unique properties and potential applications in advanced electronics. This study investigates the fabrication and characterization of Fe-doped SnSe semico...

Many gold and gold-bearing complex deposits related to the Late Jurassic and Early Cretaceous magmatism are known in Eastern Transbaikalia. The largest deposits are the Lugokan, the Kultuma and the Bystrinsky. These deposits are in a paragenetic rela...

Iron and iron–manganese deposits form three closely spaced clusters within the Lesser Khingan Range of the Russian Far East. Fe-Mn mineralization is hosted in Vendian–Cambrian carbonates and composed of magnetite, hematite, braunite, haus...

In the present study, numerically iterative models are employed to study two processes involved in the pulsed laser deposition of an Y3Fe5O12 target. The 1D conduction heat model is used to evaluate the temperature of the target irradiated by a nano-...

This study investigated the influence of Fe content on the microstructure and mechanical properties of Ti–6Al–4V(TC4) + 25Ti alloys prepared by low-energy-density direct energy deposition (DED) technology. With the incorporation of the Fe...

FeCoNiCrAl0.8Cu0.5Si0.5 high-entropy alloys were fabricated using vacuum induction melting and laser deposition processes, followed by a comparison of the structural and mechanical properties of two distinct sample types. The as-cast FeCoNiCrAl0.8Cu0...

To obtain the wear-resistant camshaft with surface rigidity and core toughness and improve the service life of camshaft, wear-resistant Fe-based alloy gradient material was prepared by laser melt deposition. The traditional camshaft was forged by 12C...

Herein, we aimed to obtain NiFe layered double hydroxide (LDH) with a controlled phase and surface morphology as a highly active and stable oxygen evolution catalyst via the electrochemical deposition method, which was thermodynamically stable for th...

Graphene/polylactic acid; nano-Fe3O4/polylactic acid; and graphene/nano-Fe3O4/polylactic acid composite absorbers are independently produced by fused deposition modeling technology. The effects of the content of graphene and nano-Fe3O4 on absorbing p...

Magmatic fluids and leaching of rocks are regarded as the two sources of magmatic hydrothermal deposits, but their relative contributions to the metals in the deposits are still unclear. In this study, we combine major elements and Fe isotopes in two...

LiFePO4 is a common electrode cathode material that still needs some improvements regarding its electronic conductivity and the synthesis process in order to be easily scalable. In this work, a simple, multiple-pass deposition technique was utilized...

High-entropy alloys (HEAs) are new alloy systems that leverage solid solution strengthening to develop high-strength structural materials. However, HEAs are typically cast alloys, which may suffer from large as-cast grains and entrapped porosity, all...

Fe-Mn-Si shape memory alloys (SMAs) have gained significant attention due to their unique characteristics. However, there remains a gap in the literature regarding the fabrication of these alloys using laser-directed energy deposition (LDED). This st...

BiFeO3 (BFO) films on highly oriented pyrolytic graphite (HOPG) substrate were obtained by the atomic layer deposition (ALD) method. The oxidation of HOPG leads to the formation of bubble regions creating defective regions with active centers. Chemis...

This study investigates the structural and catalytic properties of pure and Sr-doped LaCoO3 and LaFeO3 thin films for potential use as resistive gas sensors. Thin films were deposited via pulsed laser deposition (PLD) and characterized using X-ray di...

The catalytic conversion of CH4 and CO2 into H2-rich syngas is known as the dry reforming of methane (DRM). The dissociation of CH4 over active sites, coupled with the oxidation or polymerization of CH4−x (x = 1–4), plays a crucial role i...

In the present work, polycrystalline Bi0.67La0.33Fe0.5Sc0.5O3 thin films were synthesized using a simple and cost-effective chemical solution deposition process employing the spin coating technique. In order to check the feasibility of the fabricatio...

The paper is devoted to the direct energy deposition (DED) of functionally graded materials (FGMs) created from stainless steel and aluminum bronze with 10% content of Al and 1% of Fe. The results of the microstructure analysis using scanning electro...

In order to prepare nano-TbF3 coating with high quality on the surface of Nd-Fe-B magnets by electrophoretic deposition (EPD) more efficiently, Mg2+ and Cu2+ charging agents are introduced into the electrophoretic suspension and the influence on the...