43 Results Found

Herein, ordered mesoporous materials like SBA-15 and Al/SBA-15 were prepared using the pH adjustment method. Thus, these materials were developed in different pH of synthesis, from the pH adjustment method using a KCl/HCl solution and varying the Si/...

This study involved the fabrication of a set of aluminum ion-grafted SBA-15 utilizing ethylenediamine and trimethylamine ionic liquids. The primary objective was to examine the impact of the fabrication environment on the physicochemical characterist...

Hierarchical AlSBA-15–zeolite materials were utilized as a supports for preparing hydroisomerization catalysts. Detailed consideration was given to: (i) the effect of the zeolite type introduced into AlSBA-15–zeolite composites (where zeolite is β, m...

Al-SBA-15 materials were functionalized by ball milling with several niobium loadings (0.25–1 wt.%) and/or with several F- loadings, using NH4F as a precursor. The catalysts synthesized in this study were characterised by X-ray diffraction (XRD), N2...

Transition metals as catalysts for total VOC oxidation at low temperatures (150–280 °C) are a big challenge nowadays. Therefore, iron-modified SBA-15, AlSBA-15, and ZrSBA-15 materials with 0.5 to 5.0 wt.% Fe loading were prepared and tested...

A collection of Al-SBA-15 mesoporous catalysts (Si/Al = 13–174) was investigated to overcome typical accessibility constraints of microporous solids. 27Al MAS NMR confirmed the existence of tetrahedrally coordinated Al in the catalyst’s f...

Functionalized aluminosilicate materials were studied as catalysts for the conversion of different cyclic carbonates to the corresponding epoxides by the addition of CO2. Aluminum was incorporated in the mesostructured SBA-15 silica network. Thereaft...

Magnetically separable nanocatalysts were synthesized by incorporating iron nanoparticles on a mesoporous aluminosilicate (Al-SBA-15) through a mechanochemical grinding pathway in a single step. Noticeably, magnetic features were achieved by employin...

Palladium (Pd) and aluminium (Al) supported on SBA-15 were prepared as catalysts for cracking biodiesel waste from biodiesel production. Mesoporous silica SBA-15 was first synthesized by a hydrothermal method and then loaded with Al or Pd particles w...

We have successfully incorporated iron species into mesoporous aluminosilicates (Al-SBA-15) using a simple mechanochemical milling method. The catalysts were characterized by nitrogen physisorption, inductively coupled plasma mass spectrometry (ICP-M...

Heterogeneous catalysts containing cobalt and molybdenum supported on mesoporous materials types SBA-15 and AlSBA-15 were synthesized for application in the HDS reactions of thiophene in the n-heptane stream. The materials were synthesized by the hyd...

Cu/ZnO catalysts promoted with Mn, Nb and Zr, in a 1:1:1 ration, and supported on Al2O3 (CZMNZA) and SBA-15 (CZMNZS) were synthesized using an impregnation method. The catalytic performance of methanol synthesis from CO2 hydrogenation was investigate...

Composites of hydroxyapatite (HaP) and highly ordered large pore mesoporous silica molecular sieves such as, Al-SBA-15 and Al-MCM-41 (denoted as SBA-15 and MCM-41. respectively) were developed, characterized by XRD, BET, FTIR, HRTEM and NMR-MAS, and...

Catalytic pyrolysis behavior of synthesized microporous catalysts (conventional Zeolite Socony Mobil–5 (C-ZSM-5), highly uniform nanocrystalline ZSM-5 (HUN-ZSM-5) and β-zeolite), Mesoporous catalysts (highly hydrothermally stable Al-MCM-41 with acces...

Ordered mesoporous SBA-15 analogs with different Si/Al ratios were successfully prepared in a two-step process from self-assembly of ZSM-5 nanoseeds at high temperature in mildly acidic media (473 K, pH 3.5). The obtained products were characterized...

A feasible approach was developed for the synthesis of ordered mesoporous SBA-15-type materials using coal fly ash (CFA) as raw material. In the proposed approach, CFA was, firstly, activated by subcritical water with the addition of NaOH, which allo...

The local structure, element interactions, and electronic structure properties in Sb-As and Sb-Al-As melts were studied using ab initio molecular dynamics (AIMD) simulations. Sb-0.1wt%Al alloy was prepared using vacuum melting, and both pure Sb and S...

We have been made aware that the figures and experimental data of this article [...]

The transformation of the furfural-acetone condensation adduct (FAc) was investigated under atmospheric pressure at 300 °C over a series of molybdenum supported on SBA-15 doped with different acid/oxophilic species (Zr, Fe and Al). The FAc underw...

A promising method to reduce global warming has been methane reforming with CO2, as it combines two greenhouse gases to obtain useful products. In this study, Ni-supported catalysts were synthesized using the wet impregnation method to obtain 5%Ni/Al...

A high-performance Pt catalyst supported on SBA-15 was developed for furfural decarbonylation. Compared to Pt catalysts loaded on microporous DeAl-Hbeta zeolite and hierarchical micro-mesoporous MFI nanosheet (NS) materials, the 1%Pt/SBA-15 catalyst...

A morphological strategy consisting of nanocasting synthesis of nickel aluminate spinel precursor was addressed. Two nanocasted catalysts were synthesized involving different template-removal procedures (i.e., Teflon-assisted calcination vs. NaOH was...

UV–Vis spectroscopy as well as in situ FTIR spectroscopy of pyridine and CO adsorption were applied to determine the nature of Co species in microporous, mesoporous, and mixed oxide materials like Co–ZSM-5, Co/Na–ZSM-5, Co/Al–...

Urban wastes are a potential source of environment contamination, especially when they are not properly disposed. Nowadays, researchers are finding innovative solutions for recycling and reusing wastes in order to favour a sustainable development fro...

Vajedian et al. [1] present an improved method for the derivation of deformation parameters using satellite Interferometric Synthetic Aperture Radar (InSAR) data. The method is a modification of the Small Baseline Subset (SBAS) method as implemented...

The effect of different supports such as silica (SBA-15), activated carbon (AC), and mesoporous alumina (Al2O3) on catalytic activities of hydrotreating nickel molybdenum (NiMo) catalysts was demonstrated for upgrading vacuum residue. Nitrogen adsorp...

Co-based catalysts have shown great promise for propane dehydrogenation (PDH) reactions due to their merits of environmental friendliness and low cost. In this study, ordered mesoporous molecular sieve-supported CoOx species (CoOx/Al-SBA-15 catalyst)...

We present in this comment a Multi-Temporal SAR Interferometry (MT-InSAR) analysis showing that the results published by Milillo et al. (2019) in the Remote Sensing Journal, presenting the evidence of space geodetic observations relevant to displacem...

The review presents recent examples of heterogenic catalysts based on porphyrins and phthalocyanines loaded on mesoporous materials, such as MCM-41, SBA-15, MCM-48, SBA-16 or Al-MCM-41. Heterogenic approach to catalysis eases recovery, reuse and prev...

We would like to thank our colleagues for their comment, as we believe that this discussion further highlights the importance of innovative research in the emerging field of InSAR applications to civil engineering structures. We discuss the statement...

The deposits formed during the DBD plasma conversion of CH4 were characterized by high-resolution scanning electron microscopy (HRSEM) and energy dispersive X-ray elemental analysis (EDX) for both cases of a non-packed reactor and a packed reactor. F...

Soil co-contamination with antimony (Sb) and arsenic (As) presents significant ecological and human health risks, demanding effective stabilization solutions. This study evaluated iron–manganese-modified hydrochar (FMHC) for synergistic Sb-As stabili...

Carbon dioxide methanation was carried out over Ni-based catalysts on different supports and chelating ligands in microreactors. To investigate the influence of chelating ligands and supports, the Ni catalysts were prepared using different support su...

Solid acid catalysis is an important class of reactions. The principal advantages of solid acid catalysts as compared to their corresponding fluid acids include minimal waste and ease of product separation. One type of these catalysts is based on alu...

The ongoing miniaturization of semiconductor devices necessitates continuous advancements in lithographic processes, which are critical for high-precision circuit formation. To prevent substrate damage during the etching step, a spin-on hardmask (SOH...

The Hunza Valley, in the northwestern Karakoram Mountains, North Pakistan, is a typical region with many towns and villages, and a dense population and is prone to landslides. The present study completed landslide identification, updating a comprehen...

The Qinghai-Tibetan plateau (QTP), also known as the Third Pole and the World Water Tower, is the largest and highest plateau with distinct and competing surface and subsurface processes. It is covered by a large layer of discontinuous and sporadic a...

The freeze–thaw (F-T) cycle of the active layer (AL) causes the “frost heave and thaw settlement” deformation of the terrain surface. Accurately identifying its amplitude and time characteristics is important for climate, hydrology,...

Clofazimine (CLZ) is an effective antibiotic used against a wide spectrum of Gram-positive bacteria and leprosy. One of its main drawbacks is its poor solubility in water. Silica based materials are used as drug delivery carriers that can increase th...

The Fischer–Tropsch process is considered one of the most promising eco-friendly routes for obtaining synthetic motor fuels. Fischer–Tropsch synthesis is a heterogeneous catalytic process in which a synthesis gas (CO/H2) transforms into a...

Alkali-activated persulfate (PS) is widely used in situ in chemical oxidation processes; however, studies on the innovation of the alkali activation process are very limited. Two supported solid superbases, namely KNO3/γ-Al2O3 (KAl) and KNO3/SB...

This paper reports the synthesis and structural analysis of mesoporous silica materials with the use of aluminum phyllosilicate clay (bentonite) as an alternative silica source. In the proposed synthesis, bentonite, as natural aluminosilicate, was us...

The increasing presence of pollutants, including pharmaceuticals and pesticides, in water resources necessitates the development of effective remediation technologies. Zeolites are promising agents for pollutant removal due to their high surface area...