Skip to Content

Coatings, Volume 14, Issue 8

2024 August - 159 articles

Cover Story: Two-dimensional materials with ultrathin structures are characterized by water impermeability, a high specific surface area, and excellent mechanical properties, qualities that prove promising for their wide application. The layered ultrathin structure of pigments from a group of transition metal dichalcogenides (MoS2 and WS2), layered with transition metal oxides (MoO3 and WO3) and other semiconductor materials (ZnS and ZnO), was used to provide an enhanced mechanical and anticorrosion performance of pigmented systems containing spherical zinc. The results of our experiments showed an increase in both mechanical and anticorrosion performance when using these special types of inorganic pigments and an enhancement in the individual types of action mechanisms typical and proven for zinc-pigmented systems. View this paper
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list .
  • You may sign up for email alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.

Articles (159)

  • Article
  • Open Access
13 Citations
5,376 Views
25 Pages

Innovative Paper Coatings: Regenerative Superhydrophobicity through Self-Structuring Aqueous Wax-Polymer Dispersions

  • Cynthia Cordt,
  • Jennifer Daeg,
  • Oliver Elle,
  • Andreas Geissler and
  • Markus Biesalski

13 August 2024

For a wide range of applications, paper materials require effective protection against the destructive effect of water, which is most effectively realized by superhydrophobic coatings. In recent years, a considerable amount of scientific research has...

(This article belongs to the Special Issue Trends in Coatings and Surface Technology, 2nd Edition)
  • Article
  • Open Access
25 Citations
13,571 Views
22 Pages

13 August 2024

Cultural heritage is a fundamental part of the society’s identity, and its conservation is of great relevance as it transcends time and memory. To minimize its deterioration, cultural heritage has traditionally undergone diverse preservation an...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
2 Citations
3,794 Views
15 Pages

Ni-MoO2 Composite Coatings Electrodeposited at Porous Ni Substrate as Efficient Alkaline Water Splitting Cathodes

  • Aleksandar Petričević,
  • Jelena Gojgić,
  • Christian I. Bernäcker,
  • Thomas Rauscher and ,
  • Marjan Bele,
  • Milutin Smiljanić,
  • Nejc Hodnik,
  • Nevenka Elezović,
  • Vladimir D. Jović and
  • Mila N. Krstajić Pajić
  • + 5 authors+ 0 author

13 August 2024

To obtain highly efficient yet easily produced water-splitting cathodes, Ni-MoO2 composite coatings were electrodeposited at a Ni foam substrate with an open-pore structure, pore size of 450 µm, in a Watts-type bath. The concentration of MoO2 p...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
4 Citations
4,601 Views
12 Pages

13 August 2024

This study investigates the potential of the dye extracted from the fruits of the alien invasive plant staghorn sumac (lat. Rhus typhina) as a sustainable and environmentally friendly colorant. By using a range of solvents, including distilled water,...

(This article belongs to the Section Environmental Aspects in Colloid and Interface Science)
  • Article
  • Open Access
6 Citations
2,195 Views
11 Pages

Defect Control of Donor Doping on Dielectric Ceramics to Improve the Colossal Permittivity and Temperature Stability

  • Wei Wang,
  • Tingting Fan,
  • Songxiang Hu,
  • Jinli Zhang and ,
  • Xuefeng Zou,
  • Ying Yang,
  • Zhanming Dou,
  • Lin Zhou,
  • Jun Hu and
  • Shenglin Jiang
  • + 6 authors+ 1 author

12 August 2024

As the demand for miniaturization of electronic devices increases, ceramics with an ABO3 structure require further improvement of the dielectric constant with high permittivity. In the present work, Ba1−1.5xBixTiO3 (BB100xT, x = 0.0025, 0.005,...

(This article belongs to the Special Issue High-Performance Dielectric Ceramic for Energy Storage Capacitors)
  • Article
  • Open Access
1 Citations
1,936 Views
14 Pages

12 August 2024

Sulfuric acid is a concern for contacts within electronic devices, and the application of amorphous carbon films as thin electrical insulating coatings for small coils requires full investigation of its effects. Five types of amorphous carbon films w...

(This article belongs to the Special Issue Thin Films and Coatings for Energy Storage and Conversion)
  • Article
  • Open Access
3 Citations
2,461 Views
14 Pages

12 August 2024

Yuzhen Palace in Wudang Mountain, established in the 10th year of the Yongle reign of the Ming dynasty (1412 AD), is a significant heritage site within the ancient architectural complex of Wudang Mountain, recognized as a UNESCO World Heritage Site....

(This article belongs to the Section Environmental Aspects in Colloid and Interface Science)
  • Article
  • Open Access
8 Citations
2,229 Views
11 Pages

Electrophoretically Deposited TiB2 Coatings in NaF-AlF3 Melt for Corrosion Resistance in Liquid Zinc

  • Tao Jiang,
  • Junjie Xu,
  • Chuntao Ge,
  • Jie Pang and ,
  • Jun Zhang,
  • Geir Martin Haarberg and
  • Saijun Xiao
  • + 2 authors+ 0 author

12 August 2024

Molten salt electrophoretic deposition is a novel method for preparing coatings of transition metal borides such as TiB2, which has emerged in recent years. To broaden the applications of transition metal boride coatings prepared by this method, this...

(This article belongs to the Special Issue Advanced Anticorrosion Coatings and Coating Testing)
  • Article
  • Open Access
14 Citations
3,018 Views
15 Pages

12 August 2024

To delve into the effects of process parameters on temperature distribution and cladding-layer height in laser cladding, as well as the interaction between these two aspects, a thermal–fluid coupling numerical model was established considering...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
7 Citations
3,671 Views
14 Pages

Effects of ALD Deposition Cycles of Al2O3 on the Morphology and Performance of FTO-Based Dye-Sensitized Solar Cells

  • Elizabeth Adzo Addae,
  • Wojciech Sitek,
  • Marek Szindler,
  • Mateusz Fijalkowski and
  • Krzysztof Matus

11 August 2024

In dye-sensitized solar cells (DSSCs), materials classified as Transparent Conducting Oxides (TCOs) have the capacity to conduct electricity and transmit light at the same time. Their exceptional blend of optical transparency and electrical conductiv...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)
  • Article
  • Open Access
7 Citations
3,412 Views
16 Pages

The Evaluation of the Cytotoxicity and Corrosion Processes of Porous Structures Manufactured Using Binder Jetting Technology from Stainless Steel 316L with Diamond-like Carbon Coating

  • Dorota Laskowska,
  • Katarzyna Mitura,
  • Błażej Bałasz,
  • Piotr Wilczek and ,
  • Aneta Samotus,
  • Witold Kaczorowski,
  • Jacek Grabarczyk,
  • Lucie Svobodová,
  • Totka Bakalova and
  • Stanisław Mitura
  • + 5 authors+ 0 author

11 August 2024

With the growing interest in additive manufacturing technology, assessing the biocompatibility of manufactured elements for medical and veterinary applications has become crucial. This study aimed to investigate the corrosion properties and cytotoxic...

(This article belongs to the Collection Feature Paper Collection in 'Surface Coatings for Biomedicine and Bioengineering')
  • Article
  • Open Access
8 Citations
3,926 Views
17 Pages

Effect of Trace Elements on the Thermal Stability and Electrical Conductivity of Pure Copper

  • Haitao Liu,
  • Jincan Dong,
  • Shijun Liang,
  • Weiqiang Li and
  • Yong Liu

10 August 2024

The impact of introducing trace transition elements on the thermal stability and conductivity of pure copper was examined through metallographic microscopy (OM), transmission electron microscopy (TEM), and electrical conductivity measurements; the in...

(This article belongs to the Special Issue Surface Modification of Advanced Transition Metal-Based Materials for Electrochemical Energy Storage)
  • Article
  • Open Access
3 Citations
2,578 Views
18 Pages

Endurance to Multiple Factors of Water-Based Electrically Conductive Paints with Metallic Microparticles

  • Alina Ruxandra Caramitu,
  • Romeo Cristian Ciobanu,
  • Mihaela Aradoaei,
  • Magdalena Valentina Lungu and ,
  • Nicoleta Oana Nicula and
  • Eduard Marius Lungulescu
  • + 1 author+ 0 author

10 August 2024

The paper describes the innovative adaptation of some specific environmental tests from general organic coatings towards newly developed water-based composite paints with metallic particles (Al and Fe), with a high content of metal (10% and respectiv...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)
  • Article
  • Open Access
7 Citations
2,832 Views
13 Pages

10 August 2024

Calcareous deposits are a consequential outcome of cathodic protection in marine environments, exerting significant influence on the cathodic protection process and current density prerequisites. This study investigates the process of calcium deposit...

(This article belongs to the Special Issue Corrosion Resistance, Mechanical Properties and Characterization of Metallic Materials and Coatings, 2nd Edition)
  • Article
  • Open Access
5 Citations
2,121 Views
20 Pages

9 August 2024

Using chitosan as the shell material and Toddalia asiatica (L.) Lam extract as the core material, microcapsules of chitosan-coated Toddalia asiatica (L.) Lam extracts were prepared. The microcapsules were added to waterborne topcoats to investigate t...

(This article belongs to the Section Functional Polymer Coatings and Films)
  • Article
  • Open Access
3 Citations
2,090 Views
17 Pages

Modeling of Plasma Nitriding of Austenitic Stainless Steel through a Mask

  • Paulius Andriūnas,
  • Reda Čerapaitė-Trušinskienė and
  • Arvaidas Galdikas

9 August 2024

In this work, 2D simulations of stainless steel nitriding through a mask were performed with two configurations: with and without lateral adsorption under the mask, depending on the strength of the mask adhesion. The stress-induced diffusion and trap...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
4 Citations
2,249 Views
18 Pages

9 August 2024

Ultraviolet (UV) coatings are widely used because of their good performance. However, the self-healing performance of UV coatings can be further improved. Microcapsule technology can be used to solve this problem. To investigate the effects of the co...

  • Article
  • Open Access
3 Citations
2,039 Views
21 Pages

9 August 2024

Urea–formaldehyde resin was used as a wall material and Toddalia asiatica (L.) Lam extract was used as a core material to prepare urea–formaldehyde resin-coated Toddalia asiatica (L.) Lam extract microcapsules (UFRCTEMs). The effects of U...

(This article belongs to the Special Issue Surface Properties and Surface Treatments of Wood and Wood-Based Composites)
  • Article
  • Open Access
32 Citations
6,833 Views
17 Pages

Surface Roughness and Its Effect on Adhesion and Tribological Performance of Magnetron Sputtered Nitride Coatings

  • Pal Terek,
  • Lazar Kovačević,
  • Vladimir Terek,
  • Zoran Bobić and ,
  • Aleksandar Miletić,
  • Branko Škorić,
  • Miha Čekada and
  • Aljaž Drnovšek
  • + 3 authors+ 0 author

9 August 2024

Reports of the influence of surface roughness on the adhesion and tribological performance of contemporary nitride coatings with different layer designs are still scarce in the literature. Therefore, in this study, we evaluated the behavior of a sing...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
4 Citations
3,039 Views
27 Pages

Use of 2D Sulfide and Oxide Compounds as Functional Semiconducting Pigments in Protective Organic Coatings Containing Zinc Dust

  • Miroslav Kohl,
  • Karolína Boštíková,
  • Stanislav Slang,
  • Eva Schmidová and
  • Andréa Kalendová

8 August 2024

Within this study, the influence of particles of different types, natures, and sizes on the mechanical and corrosion resistance of pigmented systems containing spherical zinc was studied. For this study, prominent representatives from the group of tr...

(This article belongs to the Special Issue New Developments of Protective Coatings, Organic Polymers, and Surface Analysis: 2nd Edition)
  • Article
  • Open Access
5 Citations
2,597 Views
23 Pages

Study on the Attack of Concrete by External Sulfate under Electric Fields

  • Huanqin Liu,
  • Nuoqi Shi,
  • Kaizhao Han,
  • Xu Fu and
  • Yuexin Fang

8 August 2024

The research on and application of electric fields to promote the rapid infiltration of ions into cement concrete have been widely explored. Still, there are few studies on the migration of sulfate ions using electric fields. In this paper, a new tes...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
7 Citations
2,522 Views
10 Pages

8 August 2024

High-entropy nitride AlCrNbSiTiN coatings were deposited by RF magnetron sputtering at different bias voltages. The structure, mechanical properties and water vapor corrosion resistance of the coatings were systematically studied. The coatings exhibi...

  • Article
  • Open Access
6 Citations
3,577 Views
23 Pages

Surface Coating with Foliar Fertilizers

  • Yojana J. P. Carreón,
  • Angel A. Pereyra Zarate,
  • Alondra E. Pérez Sánchez,
  • Orlando Díaz-Hernández and
  • Jorge González-Gutiérrez

8 August 2024

Foliar fertilization, an effective agricultural practice, involves the application of nutrients directly through droplets on plant leaves. The mechanisms of mass transport and deposition that arise from the drying of a drop determine the distribution...

(This article belongs to the Special Issue Recent Advances in Surface Functionalisation)
  • Article
  • Open Access
8 Citations
2,871 Views
9 Pages

Ultra-Structural Surface Characteristics of Dental Silane Monolayers

  • Xiaotian Liu,
  • Winnie Wing-Yee Shum and
  • James Kit-Hon Tsoi

8 August 2024

This study aims to study the formation quality of the film of dental silanes. Two dental silanes, 3-methacryloxyproyltrimethoxysilane (MPS) and 3-acryloyloxypropyltrimethoxysilane (ACPS), were deposited on the silica glass-equivalent model surface (i...

(This article belongs to the Special Issue Surface Properties of Dental Materials and Instruments, 2nd Edition)
  • Article
  • Open Access
4 Citations
3,177 Views
15 Pages

New Sustainable Intumescent Coating Based on Polyphenols Obtained from Wood Industry Waste

  • Luis F. Montoya,
  • Julio Flores,
  • Jesús Ramírez,
  • David Rojas and ,
  • Ángelo Oñate,
  • Katherina Fernández,
  • Andrés F. Jaramillo,
  • Cristian Miranda and
  • Manuel F. Melendrez
  • + 4 authors+ 0 author

8 August 2024

The global proliferation of Pinus radiata, known for its rapid growth and wood density, has led to an environmental challenge—significant waste production, especially bark, without a clear valorization route. This waste poses ecological concern...

(This article belongs to the Section Functional Polymer Coatings and Films)
  • Article
  • Open Access
5 Citations
2,337 Views
20 Pages

8 August 2024

In order to prepare chitosan-coated pomelo peel flavonoid microcapsules with antibacterial properties, chitosan was used as the wall material for the purpose of coating the core material, pomelo peel flavonoids. The pH of the microcapsule crosslinkin...

(This article belongs to the Special Issue Polymer Thin Films: From Fundamentals to Applications (Second Edition))
  • Article
  • Open Access
21 Citations
5,582 Views
15 Pages

Tribological Properties of CrN/DLC and CrN Coatings under Different Testing Conditions

  • Shuling Zhang,
  • Xiangdong Yang,
  • Tenglong Huang,
  • Feng Guo and ,
  • Longjie Dai,
  • Yi Liu and
  • Bo Zhang
  • + 2 authors+ 0 author

7 August 2024

CrN and diamond-like carbon (DLC) coatings are deposited on the surface of 431 stainless steel by the direct current magnetron sputtering technique. The surface morphology, micro-structure, hardness, friction, and wear properties of CrN, CrN/DLC and...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
26 Citations
4,559 Views
16 Pages

SiM-YOLO: A Wood Surface Defect Detection Method Based on the Improved YOLOv8

  • Honglei Xi,
  • Rijun Wang,
  • Fulong Liang,
  • Yesheng Chen and ,
  • Guanghao Zhang and
  • Bo Wang
  • + 1 author+ 0 author

7 August 2024

Wood surface defect detection is a challenging task due to the complexity and variability of defect types. To address these challenges, this paper introduces a novel deep learning approach named SiM-YOLO, which is built upon the YOLOv8 object detecti...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
8 Citations
3,166 Views
24 Pages

7 August 2024

This study on oriented strand board (OSB) wood doors with veneer as the door leaf aimed to investigate consumers’ preference for visual–tactile elements of OSB. First, we utilized the questionnaire and interview methods to extract specifi...

(This article belongs to the Section Environmental Aspects in Colloid and Interface Science)
  • Article
  • Open Access
4 Citations
2,039 Views
10 Pages

Preparation of Dense TiAl Intermetallics by Cold Spraying the Precursor–Hot Isostatic Pressing

  • Jiayan Ma,
  • Xin Chu,
  • Yingchun Xie,
  • Jizhan Li and ,
  • Min Liu and
  • Jiwu Huang
  • + 1 author+ 0 author

7 August 2024

In this study, based on the element powder metallurgy method, a new hybrid method is proposed, which firstly prepares TiAl-based deposit precursors by the cold spraying of mixed Ti and Al powders and then combines this with hot isostatic pressing to...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
2 Citations
2,561 Views
16 Pages

Organic Semiconductor Devices Fabricated with Recycled Tetra Pak®-Based Electrodes and para-Quinone Methides

  • María Elena Sánchez Vergara,
  • Eva Alejandra Santillán Esquivel,
  • Ricardo Ballinas-Indilí,
  • Octavio Lozada-Flores and ,
  • René Miranda-Ruvalcaba and
  • Cecilio Álvarez-Toledano
  • + 1 author+ 0 author

7 August 2024

This work presents the synthesis of para-quinone methides (p-QMs), which were deposited as films using the high vacuum sublimation technique after being chemically characterized. The p-QMs films were characterized morphologically and structurally usi...

(This article belongs to the Special Issue Advanced Thin Films Technologies for Optics, Electronics, and Sensing)
  • Article
  • Open Access
8 Citations
4,565 Views
15 Pages

7 August 2024

A series of morpholine salt volatile corrosion inhibitors (VCIs) were synthesized via solid-phase chemical reactions. The corrosion inhibition performance was assessed using evaporation weight loss, VCI capability, and corrosion weight loss tests. Th...

(This article belongs to the Special Issue Investigation on Structure and Corrosion Resistance of Steels/Alloys)
  • Article
  • Open Access
16 Citations
4,166 Views
10 Pages

7 August 2024

Higher operating temperatures for gas turbine engines require highly durable thermal barrier coatings (TBCs) with improved insulation properties. A suspension plasma spray process (SPS) had been developed for the deposition of columnar-structured TBC...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Review
  • Open Access
5 Citations
5,513 Views
8 Pages

Zirconia Implants: A Brief Review and Surface Analysis of a Lost Implant

  • Eduardo Borie,
  • Eduardo Rosas,
  • Raphael Freitas de Souza and
  • Fernando José Dias

6 August 2024

Zirconia implants have emerged as a valuable alternative for clinical scenarios where aesthetic demands are high, as well as in cases of hypersensitivity to titanium or for patients who refuse metallic objects in their bodies due to personal reasons....

(This article belongs to the Section Surface Coatings for Biomedicine and Bioengineering)
  • Review
  • Open Access
5 Citations
4,564 Views
13 Pages

Exploring the Development of Photoresists in Lacquer under the Background of Global Carbon Neutrality: A Mini Review

  • Yong Zheng,
  • Xin Xin,
  • Qingshuo Yang,
  • Zhijia Zhang and ,
  • Zhijie Zhou and
  • Yunlong Ma
  • + 1 author+ 0 author

6 August 2024

With the establishment of a global carbon-neutral target, green and sustainable design concepts, materials, and processes have become the key to scientific and technological innovation, which highlights the development and utilization of environmenta...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)
  • Review
  • Open Access
12 Citations
4,985 Views
13 Pages

Nitriding Treatments in Nickel–Chromium-Based Superalloy INCONEL 718: A Review

  • Oriana Palma Calabokis,
  • Yamid E. Nuñez de la Rosa,
  • Vladimir Ballesteros-Ballesteros and
  • Edward Andrés Gil González

6 August 2024

This literature review focuses on the nitriding treatments of nickel-based superalloy UNS N07718, also called INCONEL 718. This alloy was selected due to the relevance of this alloy in the aerospace and oil and gas industries. The referenced studies...

  • Article
  • Open Access
5 Citations
2,424 Views
16 Pages

Preparation and Characterization of Bio-Asphalt Based on Sludge-Derived Heavy Oil

  • Zhihao Li,
  • Xuejuan Cao,
  • Jue Li,
  • Xiaoyu Yang and
  • Chao Huang

6 August 2024

To achieve the efficient resource utilization of municipal sludge and promote the sustainability of pavement materials, this study employed liquefaction technology to process municipal sludge. The resulting liquefied-sludge-derived heavy oil was blen...

(This article belongs to the Special Issue Novel Cleaner Materials for Pavements)
  • Article
  • Open Access
3 Citations
1,687 Views
15 Pages

Elastoplastic and Electrochemical Characterization of xTiB2 Strengthened Ti Porous Composites for Their Potential Biomedical Applications

  • David Israel Bravo-Bárcenas,
  • Reynier Suárez-Martínez,
  • Jonatan Pérez-Alvarez,
  • Omar Jiménez-Alemán and ,
  • Iván Gerardo Farias-Velazquez,
  • Marco Aurelio Gonzaléz-Albarrán and
  • Jorge Chávez
  • + 2 authors+ 0 author

6 August 2024

The microstructure, elastoplastic properties, and corrosive response of induced porous Ti-TiH2 materials reinforced with TiB2 particles were investigated. Samples were fabricated using CP-Ti Grade1, Titanium Hydride (TiH2), TiB2 powders (0, 3, 10, an...

(This article belongs to the Special Issue Advanced Alloy Degradation and Implants, 2nd Edition)
  • Article
  • Open Access
14 Citations
3,602 Views
15 Pages

Nanocomposite Coatings of Pectin and Oxide Zinc Nanoparticles to Increase Papaya Shelf Life

  • Joelma Saures dos Santos,
  • Caroline Cagnin,
  • Bheatriz Silva Morais de Freitas,
  • Richard Marins da Silva and ,
  • Glaydson Brasileiro Lopes de Jesus,
  • Celso Martins Belisário,
  • Mariana Buranelo Egea,
  • Josemar Gonçalves de Oliveira Filho and
  • Geovana Rocha Plácido
  • + 4 authors+ 0 author

6 August 2024

Nanocomposite coatings functionalized with antimicrobial nanoparticles could be a promising alternative for the postharvest preservation of fruits. This study aimed to develop nanocomposite coatings based on pectin incorporated with zinc oxide (NPZ)...

(This article belongs to the Special Issue Bio-Nanocomposite Coatings: A Potential Strategy to Improve the Overall Performance of Food Packaging Materials)
  • Article
  • Open Access
4 Citations
2,320 Views
16 Pages

Effect of Composite Fibers and Fly Ash on the Properties of Portland–Sulfoaluminate Composite Cement-Based Grouting Sealing Materials

  • Jiming Bao,
  • Xuzheng Zhu,
  • Shanyang Wei,
  • Feng Ren and ,
  • Weidong Luo and
  • Shuqi Xu
  • + 1 author+ 0 author

6 August 2024

Current conventional cement materials are no longer able to meet the actual usage needs of geotechnical engineering. In order to improve the workability of cement materials used in geotechnical, transportation, and mining engineering, it is necessary...

(This article belongs to the Section Environmental Aspects in Colloid and Interface Science)
  • Article
  • Open Access
4 Citations
2,361 Views
12 Pages

5 August 2024

The self-assembled monolayers (SAMs) process is one of the techniques used for the production of ultra-thin layers. The present work is therefore devoted to the study of the inhibition of zinc corrosion in a marine environment rich in H2S by SAMs bas...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Review
  • Open Access
33 Citations
7,189 Views
20 Pages

5 August 2024

Various natural polymers have been explored for their specific and desirable functional properties. Biopolymers have been found to hold the potential to satisfy many current environmental and health needs from a natural food packaging perspective. Wi...

(This article belongs to the Special Issue Research on Food Packaging and Storage)
  • Article
  • Open Access
16 Citations
4,576 Views
14 Pages

On Low-Velocity Impact Response and Compression after Impact of Hybrid Woven Composite Laminates

  • Yumin Li,
  • Yongxing Jin,
  • Xueting Chang,
  • Yan Shang and
  • Deng’an Cai

5 August 2024

This paper aims to study the low-velocity impact (LVI) response and compression after impact (CAI) performance of carbon/aramid hybrid woven composite laminates employed in marine structures subjected to different energy impacts. The study includes a...

(This article belongs to the Collection Feature Paper Collection for Topic Editors and Invited Scholars in Coatings)
  • Review
  • Open Access
10 Citations
4,638 Views
17 Pages

5 August 2024

Ceramic materials have a very long tradition of use in construction. Their durability is related to the surface of the material and the action of the corrosive environment. One of the corrosive factors acting on ceramic materials is microorganisms. T...

(This article belongs to the Section Bioactive Coatings and Biointerfaces)
  • Article
  • Open Access
5 Citations
6,286 Views
11 Pages

Investigation of Piezoelectric Properties of Wurtzite AlN Films under In-Plane Strain: A First-Principles Study

  • Guoqiang Qin,
  • Ziyuan Zhao,
  • Ao Wang,
  • Wentao Wang and ,
  • Shengjian Qin,
  • Hongya Wu,
  • Zhigang Yang,
  • Gang Yu and
  • Guanglei Zhang
  • + 4 authors+ 0 author

4 August 2024

This research article presents a comprehensive first-principles study on the piezoelectric properties of Wurtzite Aluminum Nitride (AlN) films under in-plane strain conditions. By calculating the piezoelectric tensor coefficients (e33, e31, and e15),...

(This article belongs to the Special Issue Recent Progress on Functional Films and Surface Science)
  • Article
  • Open Access
8 Citations
2,658 Views
15 Pages

Systematic First-Principles Investigations of the Nucleation, Growth, and Surface Properties of Al11RE3 Second-Phase Particles in Al-Based Alloys

  • Wei Yin,
  • Yuming Liu,
  • Lan Lin,
  • Yiru Wang and ,
  • Leyi Chen,
  • Zhaoting Li,
  • Honghu Peng,
  • Touwen Fan,
  • Yuanzhi Wu and
  • Dongchu Chen
  • + 7 authors+ 2 authors

4 August 2024

At room temperature, Al alloys have excellent mechanical properties and are widely used in automotive, electronics, aerospace and other fields, but it is difficult to maintain this advantage in the middle and high temperature ranges. To address this...

(This article belongs to the Special Issue Surface Modification, Repairing and Forming of Metallic Materials by Additive Manufacturing)
  • Article
  • Open Access
5 Citations
2,800 Views
16 Pages

Evaluation of Microbial Degradation of Thermoplastic and Thermosetting Polymers by Environmental Isolates

  • Pierluca Nuccetelli,
  • Francesca Maisto,
  • Lucia Kraková,
  • Alfredo Grilli and ,
  • Alžbeta Takáčová,
  • Alena Opálková Šišková and
  • Domenico Pangallo
  • + 2 authors+ 0 author

3 August 2024

In this study, a microbial–enzymatic strategy was pursued to address the challenge of degrading thermoplastic and thermosetting polymers. Environmental microorganisms were isolated, and their enzymatic activities were assessed using colorimetri...

(This article belongs to the Section Functional Polymer Coatings and Films)
  • Article
  • Open Access
2 Citations
2,218 Views
23 Pages

3 August 2024

Non-conjugated polymer-derived functional nanocomposites are one of the important ways to develop multifunctional hybrids. By increasing the degree of crosslinking, their photophysical properties can be improved. PbS is a class of narrow bandgap infr...

(This article belongs to the Section Functional Polymer Coatings and Films)
  • Article
  • Open Access
1 Citations
1,888 Views
12 Pages

Study on Characterization of Phase Transition in Continuous Cooling of Carbon Steel Using In Situ Thermovoltage Measurement

  • Qihui Wang,
  • Kun Chen,
  • Kejia Liu,
  • Lianbo Wang and ,
  • Yu Chu and
  • Bichen Xie
  • + 1 author+ 0 author

3 August 2024

In this paper, a self-designed and enhanced thermovoltage measuring device was built to capture thermovoltage curves of 45 steel during continuous cooling. The phase zones of the thermovoltage curve were interpreted based on the Engel–Brewer el...

(This article belongs to the Special Issue Advancement in Heat Treatment and Surface Modification for Metals)
  • Article
  • Open Access
11 Citations
4,358 Views
16 Pages

Data-Driven Optimization of Plasma Electrolytic Oxidation (PEO) Coatings with Explainable Artificial Intelligence Insights

  • Patricia Fernández-López,
  • Sofia A. Alves,
  • Aleksey Rogov,
  • Aleksey Yerokhin and ,
  • Iban Quintana,
  • Aitor Duo and
  • Aitor Aguirre-Ortuzar
  • + 2 authors+ 0 author

3 August 2024

PEO constitutes a promising surface technology for the development of protective and functional ceramic coatings on lightweight alloys. Despite its interesting advantages, including enhanced wear and corrosion resistances and eco-friendliness, the in...

(This article belongs to the Special Issue Functional Films/Coatings Processing Technologies: Deposition and Process)

of 4

XFacebookLinkedIn
Coatings - ISSN 2079-6412