The fabrication of WC-based cemented carbides faced challenges including inhomogeneous composition and grain coarsening. To solve these problems, WC–Co cemented carbides were fabricated via spark plasma sintering (SPS) using core–shell WC...
DNN (Deep Neural Network) is one kind of method for artificial intelligence, which has been applied in various fields including the exploration of material properties. In the present work, DNN, in combination with the 10-fold cross-validation, is app...
To investigate the effect of liquid-phase laser ablation on the hardness of WC-Co cemented carbide, this study performed hardness testing, elemental distribution analysis, and XRD phase analysis. The influence of ablation times on the hardness, eleme...
WC–Co cemented carbides build one of the important classes of metal matrix composites. We show in this paper that the use of machine vision methods makes it possible to obtain sufficiently informative statistical data on the topology of the int...
In this paper, the influence of a nickel binder metal and molybdenum carbide as an additional alloying element on the microstructure and corrosion behavior of WC-based cemented carbides, processed by conventional powder metallurgy, was studied, and a...
Excellent thermal conductivity is beneficial for the fast heat release during service of cemented carbides. Thus, thermal conductivity is a significant property of cemented carbides, considerably affecting their service life. Still, there is a lack o...
The WC-13Co (wt.%) cemented carbide was prepared by simple pressureless sintering, and the influence of Mo and C additions on the eta evolution and mechanical properties was analyzed by XRD, SEM, EDS, XPS, and Vickers hardness tester. The results sho...
In the present study, the fatigue crack growth (FCG) behavior of short surface cracks in a fine-grained cemented carbide with a length of less than 1 mm was investigated. The rotating bending and the four-point bending fatigue tests were carried out...
More and more attention is being paid to the influence of powder mixing on the mechanical properties and corrosion resistance of WC-based cemented carbides. In this study, WC was mixed with Ni and Ni/Co, respectively, by chemical plating and co-preci...
This article researches the effect of ultrafine (submicron) tungsten carbide powder addition on the microstructure and mechanical properties of WC-10Co cemented carbide produced by the extrusion of a highly filled polymer. This addition aims to devel...
In this paper, the electrochemical corrosion resistance of near-nano and nanostructured WC-Co cemented carbides was investigated. WC powders with an average grain size dBET in the range from 95 nm to 150 nm and with an addition of vanadium carbide (V...
In this paper, the fracture toughness KIc of near-nano and nanostructured WC-Co cemented carbides by Vickers indentation fracture toughness (VIF) was investigated. The aim was to research the type of cracking occurring in near-nano and nano-grained W...
The wear resistance of coated tools is a key technical parameter, which is indirectly affected by the substrate phase characteristics. WC–Co cemented carbides with varied WC grain sizes (0.4, 0.7, 1.2 μm) and Co contents (3, 6, 10, 12 wt.%)...
This paper proposes a new method of evaluating the indentation toughness of hardmetals using the length of Palmqvist cracks (C) and Vickers indentation diagonal size (di). Indentation load “P” is divided into two parts: Pi for plastic ind...
Cemented carbides WC-Co are one of the basic tool materials. They constitute over half of the currently used tools intended for machining. The main advantages of WC-Co cemented carbides are high hardness and abrasion resistance. The properties of WC-...
In this overview, we summarize the results published to date concerning the small-scale mechanical testing of WC–Co cemented carbides and similar hardmetals, describing the clear trend in the research towards ever-smaller scales (currently at t...
The focus of this paper is on examining the mechanical behavior of spark plasma sintered WC-Co based composites doped with Cr3C2, TaC-NbC, TiC, and VC, as well as defining some parameters characterizing deformation and fracture processes during hardn...
The basic material used for tools for machining wood and wood-based materials is WC-Co (Tungsten Carbide with Cobalt)-cemented carbide. The advantages of WC-Co carbides are significant resistance to high temperatures, high hardness, and wear resistan...
WC-Co cemented carbides, commonly known as hardmetals, are composite materials constituted by hard ceramic particles embedded in a ductile metal matrix. Due to their unique microstructural assemblage, these materials exhibit excellent combinations of...
Tungsten cemented carbide (WC-Co) is a widely applied material in micro-hole drilling, such as in suction nozzles, injection nozzles, and wire drawing dies, owing to its high wear resistance and hardness. Since the development of wire-electro-dischar...
In this paper, the influences of Cr3C2/VC content on WC grain size, WC grain shape and mechanical properties of WC–6 wt. % Co cemented carbides were investigated. The results showed that the grain size first rapidly decreased and then slightly decrea...
Microstructure, hardness, transverse rupture strength, and abrasion resistance of WC-10 wt% Co cemented carbides modified with the addition of different mass fraction of Cr3C2, in the range of 0–3 wt%, are studied. The influence of the microstr...
In this study, the effects of Cr3C2, VC, and TaC on microstructure, WC grain morphology and mechanical properties of WC–10 wt. % Co ultrafine cemented carbides were investigated. The experimental results showed that WC grains size decreased and...
In this paper, the effect of heat treatment on the microstructure and properties of a 0.8 μm WC–10%Co ultrafine cemented carbide was studied. The results show that the microstructural differences in ultrafine WC–Co cemented carbides wi...
This paper adopts an atmospheric plasma spraying and laser cladding process to prepare WC-10Co-4Cr cemented carbide coatings on the substrate surfaces of 304 stainless steel and 316 stainless steel, respectively, and comparatively analyzes the micros...
In this study, graded cemented carbide layers were fabricated using Laser Powder-Directed Energy Deposition (LP-DED) to investigate the effects of laser input energy and WC content on crack formation, compositional distribution, and hardness. Two-lay...
This study investigates the influence of different sinter-HIP temperatures and binder saturation levels on the microstructure and properties of WC–12Co cemented carbide, produced using binder jetting. The sinter-HIP process was performed at 140...
The corrosion behavior of cemented carbides with binders of different chemical nature (Co and Ni) and carbides with distinct mean grain size (ultrafine and coarse) was studied. The investigation also included corrosion media (acidic and neutral solut...
The present study investigates the high temperature tribological performance of spark plasma sintered, nano- and micron-sized tungsten carbide (WC) bonded by 9 wt.% cobalt (Co). The composites were fabricated using a two-step procedure of mixing foll...
Micro-dimples were fabricated on the surface of WC/Co cemented carbide disks by laser, and dry friction tests were carried out by sliding with Al2O3/WC ceramic balls. Results show that the textured cemented carbide can reduce the average friction coe...
In recent years, it has been found that the service life of cemented carbide shield machine tools used in uneven soft and hard strata is substantially reduced in engineering practice. The study found that thermal stress is the main reason for the fai...
The solid joining between the WC-8Co cemented carbide and alloy steels has great significance for their extensive applications. In this study, the WC-8Co and 40Cr steel were joined with the Ag-28Cu interlayer through the SPS method. The microstructur...
Laser-Directed Energy Deposition (L-DED) is an additive manufacturing technique used for producing and repairing components, mainly for coating applications, depositing metal matrix composites such as cemented carbides, composed of hard metal carbide...
The development and research of physically superior multi-principal element alloy (MPEA) binders as cemented carbide binders is a hot topic. In this work, we fabricated a new type of MPEA binder-cemented carbide using the powder metallurgy method and...
This work was mainly focused on the processing-parameter-related microstructure and properties of ultrafine WC-10Co-0.4VC-0.5Cr3C2 cemented carbide. The samples were prepared via a spark plasma sintering (SPS) technique using nano WC and Co powders a...
The interface models of diamond-coated WC-Co cemented carbide (DCCC) were constructed without intermediate layers and with different interface terminals, such as intermediate layers of TiC, TiN, CrN, and SiC. The adhesion work of the interface model...
Investigation of four different surface-shaping and finishing sequences is carried out on the surface integrity of a WC-10Co hardmetal grade. The surface conditions include grinding, electrical discharge machining and grinding, followed by mechanical...
Cemented carbide (WC-Co) combines high hardness, wear resistance, and toughness, making it ideal for tooling applications. This study investigated cryogenic treatment’s effects on the mechanical properties of samples from various suppliers prep...
This study aims to clarify the optimization mechanism of yttrium (Y) doping on the interfacial bonding and macroscopic properties of WC/Co cemented carbides, with the goal of achieving materials that combine high hardness, high toughness, and excelle...
As a crucial component of cemented carbide, the binder phase exerts a profound influence on its microstructure and mechanical properties. In this study, ultrafine-grained WC-10CoNiFe and WC-10Co cemented carbides, with grain sizes ranging from 0.25 t...
The development of cemented carbides nowadays is aimed at the application and sintering of ultrafine and nano-sized powders for the production of a variety of components where excellent mechanical properties and high wear resistance are required for...
High-entropy alloys (HEA) as a kind of new binder for cemented carbide have garnered significant attention. In this work, WC/(17~25 wt.%)Al0.5CoCrFeNiTi0.5 cemented carbides were prepared by hot pressing sintering (HPS), and the reactions between WC...
The exploration of coarse-grained WC cemented carbide has become a research hotspot for its application in the fields of rock cutting and mining; a key issue is how to achieve uniform dispersion and densification of the sintered phase, as well as how...
In traditional cemented carbides, Co is mainly used as a binder. Recently, replacing Co with medium- to high-entropy alloys has shown significant improvements in hardness, fracture toughness, high-temperature oxidation resistance, and corrosion resis...
The industrially-important WC-Co composite materials provide a useful, albeit complicated materials system for understanding the combined influences on hardness and strength properties of the constituent WC particle strengths, the particle sizes, the...
Ultrafine grained WC-12Co-0.2VC (named UYG12V) cemented carbides were prepared via the two-step spark plasma sintering (SPS) in this study. First, the effects of the sintering temperature on the relative density and WC grain size of UYG12V cemented c...
WC-Co (tungsten carbide-cobalt) composites are widely used in industry, wear-resistant parts, and cutting tools. As successful tool materials, WC-Co carbides are widely applied in metal cutting, wear applications, chipless forming, stoneworking, wood...
The paper presents the effect of diamond particle size (varying between 2.5 µm and 20 µm) on the microstructure, density and hardness of WC-Co/diamond composites. The obtained materials contained 30% vol. diamond. The advanced sintering m...
During unloading, pressed hard metal powder compacts expand (spring back), leading to unwarranted tensile stresses and, subsequently, crack initiation in the green body. Here, the elastic spring back and the green strength are analyzed for different...
Precision edge preparation techniques for cemented carbides enable optimization of the geometry of tools’ cutting edges. These techniques are frequently used in high-stress environments, resulting in substantial improvements in tools’ cut...
of 3