6,018 Results Found

Microstructure has significant effects on the mechanical properties of AlSi10Mg alloy. Therefore, an in-depth understanding of microstructure evolution, such as dendrite and Al-Si eutectic, is of great significance to obtain the desirable microstruct...

Separation of refined silicon from Al–Si melt is still a puzzle for the solvent refining process, resulting in considerable waste of acid and silicon powder. A novel modified Czochralski method within the Al–Si alloy is proposed. After th...

A selective liquation process to extract Al from a coarse Al–Si alloy, produced by carbothermal reduction, was investigated on the laboratory scale. The products obtained by selective liquation–vacuum distillation were analyzed by X-ray diffraction,...

While research on lightweight materials has been carried out for decades, it has become intensified with recent climate action initiatives leading pathways to net zero. Aluminum alloys are at the pinnacle of the light metal world, especially in the a...

Unmodified hypoeutectic silumins have a microstructure composed of large-sized phases, which are the reason for their low mechanical properties. Many years of research have shown the modifying effects of many chemical elements and their compounds, in...

The mechanical properties of iron-rich Al–Si alloy is limited by the existence of plenty of the iron-rich phase (β-Al5FeSi), whose unfavorable morphology not only splits the matrix but also causes both stress concentration and interface mi...

This study investigates the feasibility of using an Al-Si eutectic alloy as a reactive fuel in energetic mixtures. Al-Si eutectic alloy powders were obtained from secondary resources and ground to a particle size of less than 100 μm. We examined t...

AlSi and nitrogen-doped AlSi (AlSiN) coatings were deposited onto 22MB5 steel, while h-BN coatings were applied to H13 steel using the magnetron-sputtering method. The thermal stability and tribological properties of the AlSi and AlSiN coatings were...

The corrosion behaviour of AlSi10Mg alloy produced by selective laser melting (SLM) under two different atmospheres, namely argon and nitrogen, was compared to that of AlSi10Mg alloy that had been cast. The present study demonstrates the systematic e...

The artificial aging heat treatments performed directly on as-built and solubilized AlSi7Mg0.6 and AlSi10Mg0.3 samples were characterized and discussed. The analysed bars and billets (height of 300 mm) were manufactured via the Laser Powder-Bed Fusio...

Controlling the segregation behavior of primary Si in the solidification process of hypereutectic Al-Si alloy is crucial for enhancing the design ability of the solidification structure. To explore the separation condition and morphological evolution...

Laser powder bed fusion (LPBF) technology is of great significance to the rapid manufacturing of high-performance metal parts. To improve the mechanical behavior of an LPBFed AlSi10Mg alloy, the influence of nano-Si3N4 reinforcement on densification...

The TC4/AlSi12 bimetallic structures (BS) with Nb interlayer transition were fabricated by laser additive manufacturing (LAM). The results showed that the TC4/AlSi12 BS with Nb interlayer prepared with optimized process parameters can be divided into...

The low deposition efficiency in directed energy deposition (DED) has prompted the reuse of powders that do not fuse to the builds to make additive manufacturing more sustainable. It is unknown, however, how the properties of the powder and deposited...

Al alloy/steel composite structures combine the advantage of a lightweight Al alloy and high-strength steel and are widely used in new energy vehicles, solar photovoltaic, and other fields. The main problems with the connection of an Al alloy and ste...

In this study, the influence of the multi-step heating methods, such as two-step heating methods and three-step heating methods, on the properties of Al–Si coating boron steel sheet were evaluated by using the Gleeble-3500 thermal simulator. The evol...

The demand for high-performance Al–Si casting alloys is driven by their mechanical properties, making them popular in automotive, aerospace, and engineering industries. These alloys, especially hypoeutectic Al–Si–Mg, offer benefits...

Duplex nucleation and its effect on the grain size and properties of near eutectic Al-Si alloys were investigated in this work. It is found that the grain size of Al-13Si-1Cu alloy can be greatly refined by addition of Al-2Ti-0.5B-0.5C and Al-P maste...

Commercially supplied inoculation wires have a guaranteed chemical composition but not the size and distribution of individual phases, which are very important for nucleation. Therefore, two commercial alloys used for the inoculation of Al-Si alloys...

Hypereutectic Al-Si alloys, which have a silicon content ranging from 12% to 70%, are a new generation of casing materials for chip packaging. They have broad applications in aerospace, weaponry, and civilian communications. Selective Laser Melting (...

Porous carbon fiber-reinforced Al-Si alloy matrix composites and carbon fiber felt-reinforced Al-Si alloy matrix composites with carbon content of 10 wt.% were prepared by die casting. The dry tribological properties of these two composites and Al-Si...

The present study investigated the microstructure, processability, and mechanical strength of an AlSi9Mg-20vol.%SiC composite to assess its processing and mechanical performance during the laser powder bed fusion process. A simple laser surface remel...

Aluminum Silicon (Al-Si) alloys are the most important among cast alloys and have widespread application. The β-Si phase is detrimental to the growth of micro arc oxidation (MAO) layers on Al-Si alloys. In this paper, the β-Si in the skin layer of di...

Secondary Al-Si alloys typically encompass several impurities that substantially influence the materials’ microstructure and mechanical performance. This study employed a composite addition of chlorinated salt fluxing and an aluminum–boro...

In this study, advanced open-cell porous AlSi10Mg-Al2O3 composites have been successfully fabricated by replication of NaCl space holders. The tribological behavior under dry sliding conditions at room temperature of composites with different pore si...

The coatings of boron steels play an important role in affecting the quality of hot stamping parts, so it is important to evaluate the hot stamping performance of coatings before designing processes. Taking the U-type hot stamping part of boron steel...

The microstructure and mechanical properties of AlSi5Cu1Mg alloy with (Pr+Ce) addition were investigated by optical microscopy (OM), energy dispersive spectroscopy (EDS), and scanning electron microscopy (SEM). The results demonstrated that the rare...

Most structural components undertake cyclic loads in engineering and failures always cause catastrophic economic losses and casualties. In the present work, the phase evolution of Al-Si coating of high-strength boron steel during hot stamping was inv...

AlSi10Mg alloy branches were fabricated by selective laser melting (SLM), and the branches were employed to evaluate their effect on the mechanical properties. When the porous branches were compressed along its building direction, the tree column str...

The aluminum alloy AlSi5Cu2Mg finds application in the production of high-stress cylinder head castings. The AlSi5Cu2Mg alloy is specific for its high susceptibility to hot tearing. One effective way to reduce the susceptibility of Al-Si-Cu-Mg alloys...

The effects of Zr additive on the microstructure, mechanical properties, and fracture behavior of Al-Si alloy were systematically investigated. The additive of Zr obviously reduced the size of Si particles and changed its morphology. Grain size refin...

Additive manufacturing of metal parts in the motorsport industry is becoming a decisive technology for producing lightweight and rigid parts, with increasing applications as the costs decrease. Among the available metal alloys, AlSi10Mg is one of the...

Al-Si is the most popular coating used to prevent oxidation on the surfaces of hot-stamped steel sheets during the heating process. However, like other coatings, it affects the strength of the spot welds in joining the hot-stamped steel parts. In thi...

Understanding the Si segregation behavior in hypereutectic Al-Si alloys is important for controlling the micro- and macrostructures of ingots. The macrosegregation mechanism and morphological evolution of the primary Si phase were investigated during...

The paper presents the results of tests of rapid solidification (RS) aluminum alloys with the addition of silicon (5%, 11%, and 20%). Casting by melt-spinning on the surface of an intensively cooled copper cylinder allowed to obtain a metallic materi...

AlSi10Mg has a good forming ability and has been widely accepted as an optimal material for selective laser melting (SLM). However, the strength and elongation of unmodified AlSi10Mg are insufficient, which limits its application in the space industr...

The range of available aluminum alloy powders for laser powder bed fusion (LPBF) is restricted to mainly Al–Si based alloys. Currently aluminum alloy powders, designed for lightweight application, based on Al–Mg (5000 series), Al–Si...

This research investigates the tribological behavior of advanced open-cell porous AlSi10Mg-SiC composites fabricated using the novel replication method of NaCl space holders. These composite materials have potential applications in lightweight and hi...

The chemical and phase composition of the coating and the coating/substrate interface of an Al-Si-coated 22MnB5 hot stamped steel was investigated by means of SEM-EDS, XRD, micro-XRD and electron diffraction. Moreover, the surface profile was analyze...

The effect of alloying the Eu element on primary Si refinement in varied purity Al–16Si alloys was studied by scanning electron microscopy (SEM), thermal analysis, micro x–ray diffraction (μ–XRD), electron probe microanalysis (EP...

The synergistic effect between strontium (Sr) and melt quenching on the solidified microstructure of hypereutectic Al-Si alloys was investigated by optical and scanning electron microscopy. The results indicate that melt quenching can suppress the gr...

Recognizing the lightweight nature and superior tribological properties of Al-based metal matrix composites, this study introduces a novel analytical model based on polynomial approximations, offering new insights into the mechanisms of dry friction...

Commercial AlSi7Mg alloy represents the usual choice for complex geometry casting production. The market imperative to improve mechanical properties imposed the design of new chemical composition of AlSi7MgCu alloy with high content of Cu (up to 1.43...

This study fabricated a thixoformed Al-7% Si alloy using the cooling slope technique and subjected it to heat treatment before processing with severe plastic deformation to determine the effect of this combination method on the microstructure refinem...

A fine-grained nepheline sample from Egan Chutes, Ontario, with the chemical composition (K1.32▯0.68)(Na6.05Ca0.22)[Al7.77Si8.21O32], where ▯ represents vacancies, was studied through in situ synchrotron powder X-ray diffraction (XRD) dat...

The microstructure, mechanical properties, and wear behavior of three Al–Si alloys, namely: Al–1.3%Si, Al–1.5%Si and Al–13.5%Si were investigated. The specimens were examined by using an optical microscope to investigate the m...

In this paper, the fatigue energy dissipation of Gravity Casting (GC) and Laser-based Powder Bed Fusion (LPBF) AlSi10Mg alloys under cyclic loading are investigated. The increase in surface temperature related to the energy dissipation effect is deco...

Metal–metal composites represent a particular class of materials showing innovative mechanical and electrical properties. Conventionally, such materials are produced by severely plastically deforming two ductile phases via rolling or extruding, swagi...

This study comprehensively evaluates the latent heat of hypoeutectic AlSi5Cu alloys with 1, 2, and 4% of Cu by mass, investigating their solidification behavior under controlled cooling conditions. Latent heat, a critical thermophysical property, sig...

In order to improve the wear resistance of Al-Si alloy cylinder liners, surface treatment is usually used. The Al-Si alloy cylinder liner samples were prepared by mechanical grinding and laser finishing. The mechanical grinding samples were carried o...