Skip to Content
You are currently on the new version of our website. Access the old version .

26 Results Found

  • Article
  • Open Access
2,721 Views
13 Pages

19 July 2023

In this study, the solidified microstructure and phase transition temperatures of Ag50.5Cu33.3Sn16.2-xInx (x = 5.0, 6.6, 8.2, 9.1, 9.9, 10.7, 11.5, 12.3; at.%) alloys were investigated using a scanning electron microscope with energy dispersive spect...

(This article belongs to the Topic Phase Diagram, Phase Transition and Advanced Materials Design)
  • Article
  • Open Access
9 Citations
8,804 Views
15 Pages

Thermodynamic Modeling of the Ag-Cu-Sn Ternary System

  • Qingsong Tong,
  • Jing Ge,
  • Maohua Rong,
  • Jielong Li and ,
  • Jian Jiao,
  • Lu Zhang and
  • Jiang Wang
  • + 2 authors+ 0 author

20 September 2022

In this work, combined with previous assessments of the Ag-Cu, Ag-Sn and Cu-Sn binary systems, thermodynamic modeling of the Ag-Cu-Sn ternary system was performed using the CALPHAD method using the reported phase diagram data and thermodynamic data....

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
12 Citations
6,345 Views
12 Pages

22 March 2019

To analyze the reinforcement effect of adding polymer to solder paste, epoxies were mixed with two currently available Sn-3.0Ag-0.5Cu (wt.% SAC305) and Sn-59Bi (wt.%) solder pastes and specimens prepared by bonding chip resistors to a printed circuit...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
5 Citations
2,031 Views
13 Pages

14 October 2024

Intermetallic compounds (IMCs) growth can simultaneously bring about low-resistance electrical pathways and drastically reduce joint lifetime. Recently, incorporated trace nanoparticles into the free-Pb solder were found to promote the performance of...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
19 Citations
4,902 Views
8 Pages

25 July 2022

This study aimed to investigate the effects of the addition of Bi and Zn on the mechanical properties of Sn-Ag-Cu lead-free alloy frequently used as a soldering material in the semiconductor packaging process. To reduce the Ag content of the commerci...

(This article belongs to the Section Metal Matrix Composites)
  • Review
  • Open Access
35 Citations
6,550 Views
19 Pages

18 November 2021

Ag-based and Cu-based brazing filler metals, which are the most widely used brazing materials in industrial manufacturing, have excellent gap-filling properties and can braze almost all the metallic materials and their alloys, except for the low-melt...

(This article belongs to the Special Issue Advances of Welding Materials)
  • Feature Paper
  • Article
  • Open Access
4 Citations
4,604 Views
10 Pages

Interfacial Reaction and Electromigration Failure of Cu Pillar/Ni/Sn-Ag/Cu Microbumps under Bidirectional Current Stressing

  • Zhiwei Fu,
  • Jian Chen,
  • Pengfei Zhao,
  • Xiaotong Guo and ,
  • Qingzhong Xiao,
  • Xing Fu,
  • Jian Wang,
  • Chao Yang,
  • Jile Xu and
  • Jia-Yue Yang
  • + 5 authors+ 0 author

28 January 2023

The electromigration behavior of microbumps is inevitably altered under bidirectional currents. Herein, based on a designed test system, the effect of current direction and time proportion of forward current is investigated on Cu Pillar/Ni/Sn-1.8 Ag/...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
25 Citations
7,885 Views
16 Pages

Active Brazing of Alumina and Copper with Multicomponent Ag-Cu-Sn-Zr-Ti Filler

  • Sri Harini Rajendran,
  • Seung Jun Hwang and
  • Jae Pil Jung

19 March 2021

The study was designed to investigate the synergic effect of Ti and Sn in the active metal brazing of Al2O3 ceramic to copper brazed, using the multicomponent Ag-Cu-Zr filler alloy. Numerous fine and hexagonal-shaped rod-like ternary intermetallic (Z...

  • Article
  • Open Access
7 Citations
3,629 Views
12 Pages

Pattern Formation by Spinodal Decomposition in Ternary Lead-Free Sn-Ag-Cu Solder Alloy

  • Jia Sun,
  • Huaxin Liang,
  • Shaofu Sun,
  • Juntao Hu and ,
  • Chunyu Teng,
  • Lingyan Zhao and
  • Hailong Bai
  • + 2 authors+ 0 author

29 September 2022

In comparison to Pb-based solders which have a toxic effect, the tin-silver-copper (SAC) family of alloys have relatively strong reliability and are widely used in the electronics industry. Phase separation and coarsening phenomenon on the surface of...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
3 Citations
3,997 Views
12 Pages

A Multilayer Paste Based on Ag Nanoparticles with Cu@Sn for Die Attachment in Power Device Packaging

  • Jintao Wang,
  • Xinjie Wang,
  • Lin Zhang,
  • Luobin Zhang and ,
  • Fangcheng Duan,
  • Fengyi Wang,
  • Weiwei Zhang,
  • Jianqiang Wang,
  • Zheng Zhang and
  • Hongtao Chen
  • + 6 authors+ 1 author

25 January 2022

A 3–5 μm Cu@Sn core-shell powder was prepared by chemical plating. Based on the mixture of this Cu@Sn and Ag NPs (nanoparticles), a soldering material for third-generation semiconductors was prepared. The joints prepared with this soldering...

  • Article
  • Open Access
358 Views
16 Pages

3 October 2026

Ag is widely used as a surface-finish material in electronic packaging, while Sn–Zn is a representative lead-free solder system. This study investigates the interfacial reactions and microstructural evolution in Sn–Zn/Ag/Cu couples during...

(This article belongs to the Special Issue Structure, Mechanical and/or Magnetic Properties of Metallic Materials—Second Edition)
  • Article
  • Open Access
6 Citations
3,893 Views
10 Pages

7 September 2018

This present study applied Cu∙Zn/Al ribbon in place of a traditional Cu ribbon to a photovoltaic (PV) ribbon. A hot-dipped and an electroplated Sn PV ribbon reflowed onto an Ag electrode on a Si solar cell and estimated the feasibility of the tested...

(This article belongs to the Special Issue Interface Engineering in Organic/Inorganic Hybrid Solar Cells)
  • Article
  • Open Access
12 Citations
5,696 Views
9 Pages

21 March 2019

This study investigated the suppression of the growth of the intermetallic compound (IMC) layer that forms between epoxy solder joints and the substrate in electronic packaging by adding graphene nano-sheets (GNSs) to 96.5Sn–3.0Ag–0.5Cu (...

(This article belongs to the Collection Additive Manufacturing: Alloy Design and Process Innovations)
  • Article
  • Open Access
19 Citations
7,990 Views
14 Pages

1 August 2018

Ion exchange and cementation experiments were done to separate silver(I) from a raffinate containing silver(I), nickel(II), and zinc(II) and small amounts of copper(II) and tin(II). The raffinate resulted from the recovery of gold(III), tin(II) and c...

(This article belongs to the Section Chemical Processes and Systems)
  • Article
  • Open Access
13 Citations
5,049 Views
19 Pages

9 July 2024

Sn-Ag-Cu-Bi (SAC-Bi) alloys are gaining popularity as a potential replacement for current lead-free solder alloys in microelectronic packages. In this study, the tensile and viscoplastic behaviors of eight SAC-Bi alloys with 0, 1 wt.%, 2 wt.%, and 3...

  • Article
  • Open Access
6 Citations
7,051 Views
20 Pages

16 January 2018

Although native bismuth is a relatively common mineral, native antimony is less abundant, and Sb-Bi alloys are relatively rare phases in Nature. Sb-Bi alloys and Ag-Cu-Pb-Sb-Bi sulphosalts have been discovered in the Jialong vein-type Cu-Sn deposit i...

  • Article
  • Open Access
17 Citations
5,551 Views
14 Pages

Thermochemical Mechanism of the Epoxy-Glutamic Acid Reaction with Sn-3.0 Ag-0.5 Cu Solder Powder for Electrical Joining

  • Gwang-Mun Choi,
  • Ki-Seok Jang,
  • Kwang-Seong Choi,
  • Jiho Joo and ,
  • Ho-Gyeong Yun,
  • Chanmi Lee and
  • Yong-Sung Eom
  • + 2 authors+ 0 author

20 March 2021

An epoxy-based solder paste (ESP) is a promising alternative to conventional solder pastes to improve the reliability of fine-pitch electrical joining because the epoxy encapsulates the solder joint. However, development of an appropriate epoxy formu...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
4 Citations
2,237 Views
14 Pages

1 June 2024

This study was conducted on SAC105 (Sn-1wt.%Ag-0.5wt.%Cu) lead-free solder modified with Bi and Sb. The wetting, melting point, and mechanical properties were analysed with the addition of 1~5 wt.%Bi and 1~5 wt.%Sb for SAC105 base alloy. The wetting...

(This article belongs to the Special Issue Advanced Electronic Packaging Technology: From Hard to Soft)
  • Article
  • Open Access
7 Citations
2,431 Views
11 Pages

8 November 2024

Nanotwinned Cu (NT-Cu) is a promising candidate for Cu redistribution lines (RDLs). However, oxidation in NT-Cu lines is of concern because it increases electrical resistance and endangers the reliabilities of semiconductor devices such as temperatur...

  • Article
  • Open Access
11 Citations
4,663 Views
15 Pages

14 March 2023

During operation, electronic components are exposed to high temperatures that may last for long periods, depending on the operating duration. Solder joints are one of the components most affected by thermal aging while in service. In this research, t...

  • Article
  • Open Access
4 Citations
2,734 Views
13 Pages

Applicability Evaluation of Nano-Al2O3 Modified Sn-Ag-Cu Solder in High-Density Electronic Packaging Subjected to Thermal Cycling

  • Jie Wu,
  • Guoqiang Huang,
  • Yiping Wu,
  • Xiwu Huang and ,
  • Rui Yu,
  • Xuqi Yang,
  • Guangyao Chen,
  • Cheelong Tan,
  • Zhihao Yu and
  • Yong Xu
  • + 6 authors+ 1 author

1 December 2022

Recently, 3D packaging has been regarded as an important technical means to continue Moore’s Law. However, excessive stacking will increase the longitudinal dimension, and one chip with high-density bondings packaging is still needed. Thus, it...

(This article belongs to the Special Issue Advances in Metal Matrix Composites)
  • Article
  • Open Access
10 Citations
2,532 Views
15 Pages

21 July 2024

Bi-doped Sn–Ag–Cu (SAC) microelectronic solder is gaining attention for its utility as a material for solder joints that connect substrates to printed circuit boards (PCB) in future advanced packages, as Bi-doped SAC is reported to have a...

  • Article
  • Open Access
9 Citations
3,853 Views
11 Pages

Brittle Fracture Behavior of Sn-Ag-Cu Solder Joints with Ni-Less Surface Finish via Laser-Assisted Bonding

  • Seonghui Han,
  • Sang-Eun Han,
  • Tae-Young Lee,
  • Deok-Gon Han and ,
  • Young-Bae Park and
  • Sehoon Yoo
  • + 1 author+ 0 author

22 July 2024

In this study, we investigated the brittle fracture behavior of Sn-3.0Ag-0.5Cu (SAC305) solder joints with a Direct Electroless Gold (DEG) surface finish, formed using laser-assisted bonding (LAB) and mass reflow (MR) techniques. Commercial SAC305 so...

(This article belongs to the Section Electronic Materials)
  • Review
  • Open Access
1,046 Views
16 Pages

6 November 2025

The creation of novel, effective materials with specific properties is necessary to advance technology. To do this, objective regularities between the material’s composition, structure, and properties must be found. A comparative analysis of gl...

(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
  • Article
  • Open Access
17 Citations
2,884 Views
17 Pages

31 March 2023

As a high-temperature structural material, Ni3Al matrix composites are often used to manufacture basic mechanical components that need to be used in high-temperature conditions. To meet the increasing demand for metal matrix composites with an excell...

(This article belongs to the Section Tribology)
  • Article
  • Open Access
1 Citations
2,338 Views
15 Pages

11 August 2023

Synchrotron radiation X-ray imaging technique was applied for in situ observation of Cu6Sn5 intermetallic compounds (IMC) growth in Sn/Cu and Sn-3.5Ag/Cu joints under isothermal temperature conditions of 250/300/350 °C and time duration of 1.5 h....

(This article belongs to the Section Metal Failure Analysis)