December-1 2023 - 257 articles
Ultrathin solid slabs often have properties different from those of the bulk phase. This effect can be observed both in traditional three-dimensional materials and in van der Waals (vdW) solids in the few monolayer limit. In the present work, the ban...
In the presented study, UV LEDs (365 nm) or a medium-pressure mercury lamp (UV-ABC) were verified as UV radiation sources initiating the photocrosslinking process of varnishes based on novel photopolymerizable phosphorus (meth)acrylate oligomers. Coa...
The microstructure evolution of 2196 Al-Li alloy during aging was investigated by microhardness test, transmission electron microscope (TEM) analysis and in situ resistivity measurement. The results showed that the resistivity of the 2196 Al-Li alloy...
Laminate substrates in advanced IC packages serve as not only the principal heat dissipation pathway but also the critical component governing the thermomechanical performance of advanced packaging technologies. A solid and profound grasp of their th...
Background: Xenogenous bone has been proposed as an alternative to overcome the disadvantages of autogenous grafting. The aim of the present study was to study bone dynamics at inlay and onlay xenografts used for bone augmentation applying a ring tec...
In this work, a novel approach is suggested to grow bilayer fibers by combining electrospinning and atomic layer deposition (ALD). Polyvinyl alcohol (PVA) fibers are obtained by electrospinning and subsequently covered with thin Al2O3 deposited at a...
The compatibility of the wrought Al-Ca alloy with the element Fe was investigated in the present study. In this work, both the Al-Ca alloy and Al-Ca-Fe alloy were synthesized through melting, casting, heat treatment, and rolling. A new ternary Al-Ca-...
Concrete, as an engineering material with extremely wide applications, is widely used in various infrastructure projects such as bridges, highways, and large buildings. However, structures such as highways and bridges often need to be situated in var...
The objective of this study was to formulate dip coatings, incorporating casein, NaOH, and nanocrystalline hydroxyapatite (nanoHAp), with self-healing properties for application on ZnMg3.2 wt.% alloy in the field of biomedical applications. This stud...
This study aims to investigate the combined effect of niobium (Nb) microalloying and austenite grain refinement, using a specific heat treatment cycle, on the microstructure and tribological properties of Armox 500T steel. In this work, Nb addition a...
of 26
Get Alerted
Add your email address to receive forthcoming issues of this journal.
