539 Results Found

This work analyzes the effects of ultrafine aluminum (Al) grains on the anodizing coating reaction and anticorrosion performance of anodized industrial pure Al. Equal-channel angular pressing (ECAP) was applied to cast pure Al continuously for 16 pas...

The medium carbon steel warm deformation was carried out in a Gleeble-3500 simulator, and the microstructure was observed on a scan electron microscopy (SEM) and optical microscope (OM). The results show that the dynamic reversal transformation (DRT)...

This study aims to achieve an ultrafine-grained (UFG) Al 2024 alloy superplasticity at temperatures lower than the traditional ones for commercial Al alloys (400–500 °C). The UFG structure with a mean grain size of 100 nm produced in the al...

The aim of the present review is to summarize the recent achievements in the development of ultrafine-grained austenitic/ferritic stainless steels processed by large strain deformation. Various aspects of microstructure evolution and its effect on th...

Titanium alloys are widely used in various industries. The most common and well-known titanium alloy is titanium alloy with aluminum and vanadium (Ti-6Al-4V). This alloy is used, for example, in the manufacture of aircraft engines. As part of the dev...

The effect of ultrafine-grained size on creep behaviour was investigated in P92 steel. Ultrafine-grained steel was prepared by one revolution of high-pressure torsion at room temperature. Creep tensile tests were performed at 873 K under the initiall...

In this paper, comparison studies of the hydrogen effect on the structural and phase state, deformation behavior, and mechanical properties of the fine- (average grain size 4 µm) and ultrafine-grained (average element size 0.3 and 0.4 µm)...

The paper presents the results of fatigue-testing ultrafine-grained and coarse-grained Ti-45 wt.% Nb alloy samples under very high cycle fatigue (gigacycle regime), with the stress ratio R = −1. The ultrafine-grained (UFG) structure in the investigat...

The last two decades have witnessed significant progress in the development of severe plastic deformation techniques to produce ultrafine-grained materials with new and superior properties. This review examines works and achievements related to the l...

In this paper, we study the corrosion-resistant austenitic steel Fe-0.02C-18Cr-8Ni for medical applications. The microstructure and mechanical properties (tensile mechanical properties, torsional strength, impact toughness, and static and cyclic crac...

Ultrafine-grained pure titanium prepared by equal-channel angular pressing has favorable mechanical performance and does not contain alloy elements that are toxic to the human body. It has potential clinical value in applications such as cardiac valv...

Solid state joints of samples of coarse-grained (CG) and ultrafine-grained (UFG) nickel have been obtained for the first time using spot ultrasonic welding (USW). The UFG structure in disk-shaped samples was processed by means of high-pressure torsio...

The influence of the ultrafine-grained structure formed by equal-channel angular pressing via the “Conform” scheme on the fatigue behavior of metastable β-alloy Ti-15Mo has been studied. It is shown that the alloy with a two-phase ul...

Titanium alloys are widely used in the biomedical field. To ensure their strength meets requirements in clinics, medical titanium alloys are generally alloyed with toxic Al and/or V elements, hence ensuring their long-term biological safety after imp...

A theoretical model is suggested that describes the effect of deformation temperature on the yield stress of an ultrafine-grained (UFG) Al-Cu-Zr alloy structured with severe plastic deformation. Within the model, nanoprecipitates (NPs) of Al2Cu act a...

A novel method of cryorolling martensite for fabricating ultrafine grained low-carbon steel with attractive strength was proposed. The results indicate that ultrafine-grain structured steel could be manufactured by cryorolling and the subsequent anne...

Tungsten heavy alloy (WHA) is an ideal material employed for kinetic energy penetrators due to its high density and excellent mechanical properties. However, it is difficult to obtain ultrafine-grained tungsten alloy with excellent properties by trad...

Grain reduction in a widely used Ti-6Al-4V alloy increases its endurance limit at room temperature. In this work, the behavior of the ultrafine-grained alloy under cyclic load at the temperature of 625 K is considered. Research was conducted to exami...

Two novel ignition-resistant magnesium alloys, Mg-2Gd-2Y-1Ca and Mg-2Nd-1Y-1Ca, were prepared in the ultrafine-grain condition by equal channel angular pressing (ECAP). In addition, four commercial alloys—AZ31, AX41, AE42 and WE43—were pr...

Grains of commercially pure titanium (CP-Ti) can be refined via rotary-die equal-channel angular pressing (RD-ECAP) to meet higher application requirements. However, the grain refinement mechanism of CP-Ti during RD-ECAP has not been fully studied. H...

In this study, bulk ultrafine-grained and micro-crystalline cobalt was prepared using a combination of high-energy ball milling and subsequent spark plasma sintering. The average grain sizes of the ultrafine-grained and micro-crystalline materials we...

In this work, powders of cemented ultrafine WC-6 wt.% Co were consolidated. The feasibility of the medium frequency electrical resistance sintering (MF-ERS) technique were studied to prevent WC grain growth during consolidation. Porosity and hardness...

Improving the balance of strength and toughness in structural materials is an ongoing challenge. Delamination and grain refinement are some of the methods used to do this. In this paper, two different steels, 0.15% C–0.3% Si–1.5% Mn&ndash...

Ambient and cryogenic surface mechanical attrition treatments (SMAT) are applied to bcc iron plate. Both processes result in significant surface grain refinement down to the ultrafine-grained regime; the cryogenic treatment results in a 45% greater g...

This paper evaluates the fatigue strength of ultrafine-grained (UFG) Grade 4 Ti in the low-cycle fatigue region, as well as the strength of medical implants (plates and screws) made of UFG Ti under various types of loading in comparison with the stre...

Micro-forming with ultrafine-grained (UFG) materials is a promising direction for the fabrication of micro-electro-mechanical systems (MEMS) components due to the improved formability, good surface quality, and excellent mechanical properties it prov...

Developing high-radiation-tolerant inert matrix fuel (IMF) with a long lifetime is important for advanced fission nuclear systems. In this work, we combined zirconia (ZrO2) with magnesia (MgO) to form ultrafine-grained ZrO2–MgO composite ceramics. On...

This paper presents the results of a comprehensive study of the erosive wear resistance, strength, and adhesive characteristics of the high-temperature structural titanium alloy Ti-5.7Al-3.8Mo-1.2Zr-1.3Sn (the Russian grade VT8M-1) with coarse-graine...

In the present study, a novel Ti-2Fe-0.1B alloy was processed using equal channel angular pressing (ECAP) via route Bc for four passes. The isochronal annealing of the ultrafine-grained (UFG) Ti-2Fe-0.1B alloy was conducted at various temperatures be...

Thermomechanical processing by applying deformation-induced ferrite transformation (DIFT) is an effective method of producing ultrafine-grained (UFG) ferritic steels, which usually present high yield strength but low strain hardening. In this study,...

Effect of preliminary precipitation of Al3Sc particles on the characteristics of superplastic conductor Al-0.5%Mg-X%Sc (X = 0.2, 0.3, 0.4, 0.5 wt.%) alloys with ultrafine-grained (UFG) microstructure has been studied. The precipitation of the Al3Sc p...

In this work, the effect of an ultrafine-grained (UFG) structure obtained by multiaxial deformation (MAD) on the mechanical properties, fatigue strength, biodegradation, and biocompatibility in vivo of the magnesium alloy WE43 was studied. The grain...

Ultrafine-grained Ti31Mo alloy and Ti31Mo5HA, Ti31Mo5HA-Ag (or Ta2O5, CeO2) composites with a grain size of approximately 2 μm were produced by the application of mechanical alloying and powder metallurgy. Additionally, the surface of the Ti31Mo allo...

This paper studies the effect of equal channel angular pressing-Conform (ECAP-C) and further artificial aging (AA) on microstructure, mechanical, and electrical properties of Al 6101 alloy. As is shown, ECAP-C at 130 °C with six cycles resulted in t...

Ti(β) alloys have become an important class in the biomedical field due to low Young’s modulus, excellent physical properties, and biocompatibility. However, their properties, like biocompatibility and, also, low wear resistance, can be still enhance...

The paper presents the evaluation of the mechanical and fatigue properties of an ultrafine-grained (UFG) Al 6061 alloy processed by high-pressure torsion (HPT) at room temperature (RT). A comparison is made between the UFG state and the coarse-graine...

Microstructure evolutions and mechanical properties of a commercially pure titanium (CP-Ti, grade 2) during multi-pass rotary-die equal-channel angular pressing (RD-ECAP) and cold rolling (CR) were systematically investigated in this work, to achieve...

Ultrafine grained (UFG) materials in the bigger grain size range (0.5–1) µm display a good combination of strength and ductility, unlike smaller size UFG and nanostructured metals, which usually exhibit high strength but low ductility. Su...

Ductile-to-brittle transition (DBT) temperature and brittle fracture stress, σF, are important toughness criteria for structural materials. In this paper, low-carbon steels with an ultrafine elongated grain (UFEG) structure (transverse grain size 1.2...

Ultrafine-grained (UFG) structure formation in Ti alloys, by severe plastic deformation (SPD) processing and enhancement of their mechanical properties, including fatigue properties, has been demonstrated in numerous studies in the past 20 years. The...

This work presents an experimental validation that an ultrafine grained (UFG) structure of binary Fe-Cr alloys fabricated by severe plastic deformation (SPD) can bring about dramatic improvements in the corrosion resistance. More specifically, UFG Fe...

The ultrafine grained (UFGed) 1050 Al plates with a thickness of 2 mm, which were produced by the accumulative roll bonding technique after five cycles, were friction stir butt welded to 2 mm thick 6061-T6 Al alloy plates at a different revolutionary...

This work presents the mechanical behavior modeling of commercial purity titanium subjected to severe plastic deformation (SPD) during post-SPD compression, at temperatures of 600-900 °C and at strain rates of 0.001-0.1 s−1. The flow response of the...

High-pressure torsion (HPT) is a severe plastic deformation technique where a sample is subjected to torsional shear straining under a high hydrostatic pressure. The HPT method is usually employed to create ultrafine-grained nano-structures, making i...

The objective of the study research was to obtain bimodal structured ultrafine-grained ferrite steel with outstanding mechanical properties and excellent corrosion resistance. The bimodal microstructure was fabricated by the cold rolling and annealin...

Severe plastic deformation (SPD) can fabricate high-strength materials by forming an ultrafine grained (UFG) microstructure. Low elongation to failure of UFG materials in tensile tests, which has often been regarded as a measure of ductility of mater...

A solid-phase diffusion welding of coarse-grained and ultrafine-grained (UFG) specimens of titanium near-α alloy Ti-5Al-2V used in nuclear power engineering was made by Spark Plasma Sintering. The failure of the welded specimens in the conditio...

Applications of Copper (Cu) range from small scale applications such as microelectronics interconnects to very large high-powered applications such as railguns. In all these applications, Cu conductivity and ampacity play vital roles. In some applica...

Ultrafine grained (UFG) pure copper chips with improved material strength have been successfully prepared by large strain extrusion machining (LSEM). However, the thermal stability of the UFG chips has been a key characteristic that has restricted th...

The present work deals with studies on the dynamic behavior of ultrafine grained AA2519 alloy synthesized via cryogenic forging (CF) and room temperature forging (RTF) techniques. A split-Hopkinson pressure bar was used to perform high strain rate te...