Additive Manufacturing (AM) appears as a very interesting alternative to conventional production routes for alloys and metals, thanks to the fact that at the end of printing, the final product is obtained directly. The present article looks for the i...
The duplex stainless steel 2205 was heat treated at 750 °C, 850 °C, and 900 °C for increasing durations of up to 10 h. The samples were investigated through light microscopy (LM), transmission electron microscopy (TEM), and X-ray diffraction (XRD) to...
The electrochemical corrosion behavior of laser welded 2205 duplex stainless-steel in artificial seawater environment (3.5% NaCl solutions) with different acidity and alkalinity conditions (different pH values) was investigated using different techni...
Pneumatic chipping hammer and ultrasonic impact peening were used to relieve the welding residual stress of 2205 duplex stainless steel by manual argon arc welding, and the influences of these mechanical shock treatment technologies on the residual s...
The effect of tempering temperature on the microstructure and intergranular corrosion property of 2205 duplex stainless steel (DSS2205) was determined using a boiling acid intergranular corrosion test (boiling 65% nitric acid and 50% sulfuric acid&nd...
In this paper, the mechanical properties, microhardness and metallographic structure of 2205 duplex stainless steel by cold metal transfer (CMT) wire and arc additive manufacturing process are studied. The results show that the ultimate tensile stren...
By applying 2205 duplex stainless steel powders to repair and improve carbon steel, multi-pass laser-cladding tests were conducted on Q235 carbon steel surfaces with different laser powers in the range of 1.9~2.5 kW in order to evaluate the performan...
In this study, a combined experimental and finite element modeling methodology (FEM) for a nanoindentation study is presented to quantitatively investigate the influence of hydrogen on the mechanical properties of ferrite and austenite in 2205 duplex...
Stress relief treatments were carried out separately with a pneumatic chipping hammer, ultrasonic peening treatment, and heat treatment for metal active-gas welding (MAG) welded joints of 2205 duplex stainless steel. The effects of these methods on t...
Additive parts made of 2205 duplex stainless steel were fabricated by cold metal transfer (CMT) wire and arc additive manufacturing (WAAM), and their microstructure and properties were systematically studied. The X-ray diffraction results show that a...
Selecting appropriate materials is crucial for mitigating the severe economic and safety challenges posed by microbiologically induced corrosion (MIC) in marine and industrial settings. This study focuses on the MIC behavior of 316L austenitic stainl...
Precipitate phases often play an important role on the corrosion resistance of 2205 Duplex stainless steels (DSS). In the present paper, the microstructure and the corrosion resistance of the hot-rolled and cold-rolled 2205 steels aged for different...
Austenite and duplex stainless steels are widely used in engineering, and the latter exhibits a more excellent combination of mechanical properties and corrosion resistance due to the coexistence of austenite and ferrite and higher nitrogen. However,...
The objective of this study was to investigate and visualize the initiation and propagation of crevice corrosion in grade 2205 duplex stainless steel by means of time-lapse imaging. Transparent Poly-Methyl-Meth-Acrylate washer and disk were coupled w...
The effects of the addition of silver on the microstructural variation and antibacterial performance of 2205 duplex stainless steel after solution and aging treatment were investigated by scanning electron microscopy (SEM), transmission electron micr...
The influence of surface roughness on the pitting corrosion behaviour of 2205 duplex stainless steel (DSS) in a chloride-containing environment was investigated using electrochemical noise (EN) techniques and morphology observation. A rougher surface...
Sulphate reducing bacteria (SRB) can be found in alkaline environments. Due to their metabolite products such as hydrogen sulphide, the corrosion behaviour of materials in alkaline environments may be affected by the presence of SRB. This study focus...
When 2205 duplex stainless steel (DSS) is immersed in simulated seawater under high hydrostatic pressure, or in an electrochemically hydrogen charged state, a spindle-shaped product is found in the ferrite phase that seriously deteriorates the mechan...
Welding parameters can greatly affect the final product. In this study, there was a variation given on the pulse energy, i.e., heat input parameters. The microstructure was analyzed and presented in relation to the efficiency of corrosion. The micros...
The acidizing corrosion inhibitors reported so far have a poor effect on duplex stainless steel in high-temperature and high-concentration acid systems and cannot effectively inhibit the occurrence of selective corrosion. In this paper, a new acidizi...
We studied the effect of isothermal annealing (600–750 °C, 1 to 1000 min) on the microstructure and mechanical properties of SAF 2205 duplex stainless steel. Impact toughness was found to be significantly more affected than hardness by anne...
A bimetal composite of 2205 duplex stainless steel and AZ31B magnesium alloy was cladded successfully through the method of explosive welding. The microstructural characteristics and mechanical properties of 2205/AZ31B bimetal composite are discussed...
The present work analyzed the microstructure, mechanical, and corrosion properties of a dissimilar activated tungsten inert gas (ATIG) welded 2205 duplex stainless-steel (2205 DSS) plate and AISI 316L austenitic stainless steel (316L ASS) and compare...
The 2205 duplex stainless steel (DSS) produced by selective laser melting (SLM) exhibits high strength (1078.8 MPa) but poor plasticity (15.2%) owing to the high cooling rate during SLM, which inhibits the formation of austenite and creates a nearly...
In this paper, 8 mm thickness 2205 duplex stainless steel (DSS) plates were successfully welded using keyhole tungsten inert gas welding (K-TIG) welding, and numerical simulations were performed applying the finite element method. Three models of com...
In order to repair or strengthen stainless steel structural parts, the experiment was conducted by using plasma arc cladding technology to prepare 2205 duplex stainless steel (DSS) layers on the surface of Q345 steel. Their macro morphology and micro...
A systematic study on the densification behavior and build quality of 2205 duplex stainless steel fabricated using laser powder bed fusion (LPBF) was performed by experiment and simulation, aiming to offer some supplementary work for research on addi...
In this study, an alternating magnetic field is applied in the narrow-gap laser-MIG hybrid welding of 2205 duplex stainless steel with a thickness of 25 mm to achieve the purpose of balancing the ration of the two phases, refining the grains and impr...
Under standard conditions, DSS (duplex stainless steel) features differing amounts of ferrite and austenite, essentially depending on the thermal treatment performed. This study is focused on the ultrasonic tests (UTs) response of DSS 2205, as a func...
Additive manufacturing of duplex (DSS) and super duplex stainless steel (SDSS) has been successfully demonstrated using laser powder bed fusion (LPBF) in recent years. Owing to the high cooling rates, as-built LPBF-processed DSS and SDSS exhibit clos...
The effect of 475 °C embrittlement and microstructure process orientation on atmospheric-induced stress corrosion cracking (AISCC) of grade 2205 duplex stainless steel has been investigated. AISCC tests were carried out under salt-laden, chloride-con...
The mixture powders were designed by adding 0 wt.%~1.0 wt.% CeO2 into the 2205 duplex stainless steel (DSS) powders. The 2205 DSS cladding layer was prepared on the surface of Q345 steel by plasma arc cladding technology. The effects of different CeO...
This study is focused on isothermal and anisothermal precipitation of M23C6 carbides from the fully ferritic structure of the (γ + δ) austenitic-ferritic duplex stainless steel X2CrNiMo2253, (2205). During isothermal heat treatments, small particles...
In this study, 2205 duplex stainless steel with 12 mm thickness was welded by alternating magnetic field-assisted laser arc hybrid welding. The effect of an alternating magnetic field on the proportion distribution of two phases of the welded joint w...
Additive manufacturing (AM) is a rapidly growing field of technology. In order to increase the variety of metal alloys applicable for AM, selective laser melting (SLM) of duplex stainless steel 2205 powder and the resulting microstructure, density, m...
Duplex stainless-steel grade 2205 (2205 DSS) is the most widely used of the current duplex materials. The duplex steel alloy is characterized by high strength and high corrosion resistance through enhancing nitrogen and molybdenum contents. The activ...
Friction stir welding (FSW) as a solid-state process is an excellent candidate for high softening temperature materials welding; however, extending the tool life is required to make the process cost-effective. This work investigates the use of a high...
The control of phase balance has always been a tough challenge for the welding of duplex stainless steel, which heavily restricts its optimal serving performance in engineering. The microstructure development and mechanical characteristics of SAF2205...
The addition of hard particles such as borides to a ductile stainless steel matrix can be very efficient for improving mechanical properties. Powder metallurgy represents a suitable route for developing these material modifications, combining high re...
The relation among microstructure and fatigue behavior of 2205/316L stainless steel dissimilar welded joints was investigated. Plates of 6.35 mm in thickness with a single-V joint configuration were gas metal arc welded (GMAW) in a single pass by fee...
In the present study, the microstructures and properties of DSS 2205 solid wire MIG welded samples prepared in different shielding gases (pure Ar gas, 98%Ar + 2%O2 and 98%Ar + 2%N2) were investigated for improving the weldability of DSS 2205 welded j...
This work investigates the feasibility of using friction stir welding (FSW) process as a groove filling welding technique to weld duplex stainless steel (DSS) that is extensively used by petroleum service companies and marine industries. For the FSW...
The high-temperature thermal deformation behavior of a 2205/Q345 specimen at 850–1100 °C and strain rate of 0.01–10 s−1 was systematically studied by the Gleeble-3800 thermal simulator, which provided a theoretical basis for the...
Duplex and Super Duplex Stainless Steels are very prone to secondary phases formation related to ferrite decomposition at high temperatures. In the present paper the results on secondary phase precipitation in a 2510 Duplex Stainless Steel, heat-trea...
Steel rebars of structures exposed to cyclic loadings and marine environments suffer an accelerated deterioration process by corrosion fatigue, causing catastrophic failure before service life ends. Hence, stainless steel rebars have been emerging as...
Stainless steels are commonly used in coastal structures and in seawater desalination and treatment systems, so understanding their corrosion behaviour under different salinity conditions is important to ensure the durability and reliability of the m...
Based on their mechanical properties and good corrosion resistance, some commercial Ni-Cr stainless steels have been widely applied as biomaterials, including the austenitic 304 stainless steel, the austenitic 316 stainless steel, the duplex 2205 sta...
Duplex stainless steels present excellent mechanical and corrosion resistance properties. However, when heat treated at temperatures above 600
Electron BackScatter Diffraction (EBSD) in conjunction with Field-Emission Environmental Scanning Electron Microscopy (FEG-ESEM) has been used to evaluate the microstructural and local plastic strain evolution in different alloys (AISI 1005, AISI 304...
Due to their high ductility, high durability, and excellent corrosion resistance, stainless steels are attractive materials for a variety of applications. However, high work hardening, low thermal conductivity, and high built-up edge (BUE) formation...
of 2