Skip to Content
You are currently on the new version of our website. Access the old version .

Polymers, Volume 18, Issue 19

2026 October-1 - 143 articles

Cover Story: Barite sedimentation poses a challenge to the stability of water-based drilling fluids at elevated temperatures. In this study, cellulose nanofibers were surface-modified through AMPS/AM grafting to enhance barite suspension. Electrostatic repulsion, hydrated steric hindrance, and an interconnected three-dimensional network work together to suppress particle settling and improve suspension stability after high-temperature aging. The cover depicts hydrated green nanofibers surrounding suspended barite particles above a horizontal well, connecting the microscopic stabilization mechanism with its potential application in drilling fluids. View this paper
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list .
  • You may sign up for email alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.

Articles (143)

  • Article
  • Open Access
343 Views
13 Pages

Breathable, Flexible, and Durable Woven Fabric with Polyester/Carbon Nanotube-Wrapped Cotton Yarns for Wearable Electrothermal Heaters

  • Yunxia Liang,
  • Xuejiao Wang,
  • Qiwen Liu,
  • Ya Wang and ,
  • Yuexiao Sun,
  • Yiming Xu,
  • Dianliang Wang,
  • Xiaogang Luo and
  • Ke-Qin Zhang
  • + 4 authors+ 0 author

8 October 2026

Owing to their breathability, flexibility, washability, and wearability, fabric-based wearable heaters have gained significant attention for personal thermal management and thermotherapy applications. A key challenge, however, lies in achieving high...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
504 Views
15 Pages

AAEM/ADH Self-Crosslinking Waterborne Polyurethane–Acrylate Binder for High-Adhesion Waterborne Inks on PET Films

  • Junqing Xi,
  • Chenglong Jiao,
  • Chao Liu,
  • Shixiong Sun and ,
  • Benbo Zhao and
  • Yunjun Luo
  • + 1 author+ 0 author

8 October 2026

To address the poor adhesion of waterborne inks to polyethylene terephthalate (PET) films, a low-temperature ketone–hydrazide self-crosslinking system based on 2-(acetoacetoxy)ethyl methacrylate (AAEM) and adipic acid dihydrazide (ADH) was inco...

(This article belongs to the Special Issue Eco-Friendly Polymeric Coatings and Adhesive Technology, 3rd Edition)
  • Article
  • Open Access
315 Views
20 Pages

Effects of the Glycerol/Quercetin Ratio on the Structure and Tensile Behavior of PVA-Based Films

  • Sarah Kalli Silva da Silva,
  • Nathalia Vieira Villar de Nunes,
  • Chiara das Dores do Nascimento,
  • Eduarda Vieira Silva and ,
  • Everton Granemann Souza,
  • Camila Monteiro Cholant,
  • Ivandra Ignes de Santi,
  • Amanda Dantas de Oliveira,
  • Cesar Aguzzoli and
  • André Luiz Missio
  • + 6 authors+ 1 author

8 October 2026

Poly(vinyl alcohol) (PVA)-based films containing glycerol and quercetin were prepared by casting as potential active-packaging materials. The effects of the glycerol/quercetin ratio on structural, thermal, mechanical, barrier, and antioxidant propert...

(This article belongs to the Topic Future Trends in Polymer Science: Materials, Design, and Advanced Applications)
  • Review
  • Open Access
385 Views
45 Pages

8 October 2026

Fatigue cracking is a load-related distress limiting flexible pavement service life. This review evaluates 121 studies on the fatigue resistance of crumb rubber-modified asphalt (CRMA) across binder, mixture, modeling, and field scales. CRMA improves...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
355 Views
24 Pages

8 October 2026

Chitin is an abundant biopolymer, with 1–3 million tons potentially available annually from shellfish-processing waste, but remains underutilized because its insolubility in conventional solvents makes it difficult to process and functionalize....

(This article belongs to the Special Issue Eco-Efficient Polymer Systems: Green Synthesis and Adsorption Applications)
  • Article
  • Open Access
430 Views
23 Pages

8 October 2026

Although the piezoresistive behavior of conductive polymer composites has been widely studied, the geometry-dependent piezoresistive response of MWCNT/PLA-based TPMS lattice structures produced by fused filament fabrication (FFF) remains insufficient...

(This article belongs to the Special Issue 3D Printing of Functional Polymer Composites: Materials, Processing and Sensing Applications)
  • Article
  • Open Access
366 Views
25 Pages

8 October 2026

This study aims to evaluate the feasibility of an aluminosilicate geopolymer composite reinforced with continuous nickel-coated carbon fibers and establish its baseline mechanical properties and thermo-oxidative behavior. Unidirectional and balanced...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
251 Views
12 Pages

Gamma-Irradiated Starch/Chitosan Composite Particles for the Adsorption of Neospora caninum Membrane Proteins as a Potential Vaccine Delivery Platform

  • María Paula Palma-Calvo,
  • Laria Rodríguez-Quesada,
  • Randall Chacón-Cerdas,
  • Manuel Vilanova and
  • Ricardo Starbird-Perez

8 October 2026

Gamma irradiation offers a simple and reagent-free strategy for tailoring the physicochemical properties of starch for the development of functional biomaterials, although its application in protein delivery systems remains largely unexplored. In thi...

(This article belongs to the Section Polymer Applications)
  • Review
  • Open Access
1 Citations
512 Views
35 Pages

Heat Treatment Effects on Additively Manufactured Polymer Matrix Composites

  • Germán Omar Barrionuevo,
  • Felipe Fernández,
  • Yuvaraj Ravishankar Chappidi,
  • Jorge Ramos-Grez and ,
  • Wilson Navas-Pinto,
  • Jonathan D. Reyes-Ortiz and
  • Duncan E. Cree
  • + 2 authors+ 0 author

8 October 2026

Additive manufacturing (AM) of polymer matrix composites (PMCs) enables the fabrication of complex, structurally efficient parts, but the layer-wise thermal history intrinsic to processes such as material extrusion, vat photopolymerization, powder be...

(This article belongs to the Special Issue Additive Manufactuging of Polymer-Based Nanocomposites and Composites: Progress and Prospects)
  • Article
  • Open Access
604 Views
45 Pages

What Random Splits Measure in Polymer Glass-Transition Prediction: Chemistry Holdouts, Applicability Domains, and Prior Integration

  • Deao Han,
  • Yangkun Shao,
  • Xueru Zhong,
  • Zhanzhao Song and ,
  • Quanzhong Zhang,
  • Chuansheng Wang,
  • Deshang Han and
  • Lin Wang
  • + 3 authors+ 0 author

7 October 2026

Predicting the glass-transition temperature (Tg) helps select polymers for a service-temperature window, but accuracy on familiar structures may not transfer to a new family. We compare validation protocols on 7367 curated homopolymers. Histogram gra...

(This article belongs to the Section Artificial Intelligence in Polymer Science)
  • Article
  • Open Access
336 Views
20 Pages

7 October 2026

Microfluidic channels underpin lab-on-a-chip and analysis systems, yet their fabrication still often relies on cleanroom-intensive, photomask-based processes that limit rapid prototyping and user accessibility. Here, we present a facile fabrication s...

(This article belongs to the Special Issue Advances in Polymer Molding and Processing, 2nd Edition)
  • Review
  • Open Access
498 Views
67 Pages

7 October 2026

Polymer flooding is one of the most widely applied chemical enhanced oil recovery (EOR) technologies and has progressed from conventional onshore sandstone applications to increasingly challenging reservoir environments. This study reviews global pol...

(This article belongs to the Section Polymer Applications)
  • Review
  • Open Access
458 Views
56 Pages

7 October 2026

Polyacrylonitrile (PAN) precursor fibers represent the dominant feedstock for manufacturing high-performance carbon fibers, and the hierarchical molecular orientation established during precursor processing fundamentally determines the tensile streng...

(This article belongs to the Section Polymer Fibers)
  • Article
  • Open Access
464 Views
21 Pages

7 October 2026

This study clarifies the mechanical recovery and structural retention of damaged glass fiber-reinforced polypropylene (PP/GF) composites subjected to repetitive sub-melting thermal annealing at 160 °C. Initial thermal annealing increased matrix c...

(This article belongs to the Section Polymer Fibers)
  • Article
  • Open Access
310 Views
31 Pages

7 October 2026

Blending poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) with thermoplastic polyurethane (TPU) improves toughness but compromises compostability above a critical TPU content. To our knowledge, this is the first three-dimensional, voxel-based Mont...

(This article belongs to the Topic Multi-scale Modeling and Optimisation of Materials)
  • Review
  • Open Access
598 Views
42 Pages

Artificial Intelligence Applications for Composite Materials: A Review

  • Nada S. Alharthi,
  • Laila M. Alqahtani,
  • Albatool A. Abaalkhail,
  • Ibtehal S. Baazeem and ,
  • Mustafa Y. Haddad,
  • Mohammed T. Alamoudi and
  • Basheer A. Alshammari
  • + 2 authors+ 0 author

7 October 2026

Background: Composite materials are not easy to model using traditional experiments and physics-based approaches due to their diverse properties and multiscale nature. This review summarizes how artificial intelligence (AI) methodologies, including m...

(This article belongs to the Special Issue Advances in Polymer Composites: Fabrication, Mechanical and Tribological Behaviour)
  • Article
  • Open Access
354 Views
29 Pages

7 October 2026

Poly(lactic acid) (PLA) hybridized with nano-hydroxyapatite (nHA) and elemental magnesium (Mg) offers a route to tune load-bearing behavior while retaining a biodegradable polymer matrix. This study compares neat PLA, binary PLA-10Mg and PLA-10nHA co...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
480 Views
26 Pages

Qualification of a Swellable Hydrogel–Silicone Bimorph for Implantable Actuation

  • Esma Dosdoğru,
  • Adrian Onken,
  • Sabine Hild,
  • Patricia Torgau and ,
  • David Schäffl,
  • Jan Sündermann,
  • Marc Müller,
  • Johannes Aucktor,
  • Hasso v. Zychlinski and
  • Theodor Doll
  • + 5 authors+ 0 author

7 October 2026

To improve the structural adaptability and biological suitability of cochlear implant electrode carriers, this study systematically develops and evaluates novel 3D-printed, swellable hydrogel–silicone composites. A vinylphosphonic acid–ac...

(This article belongs to the Special Issue Application and Development of Polymer Hydrogel, 2nd Edition)
  • Article
  • Open Access
324 Views
21 Pages

7 October 2026

Carrageenan-based hydrogels are promising matrices for topical cosmetic applications because their highly hydrated polymer networks can be modified to incorporate bioactive compounds and adjust functional properties. In this study, Calendula officina...

(This article belongs to the Special Issue Recent Advances in Natural Polymers for Sustainable Applications)
  • Article
  • Open Access
330 Views
20 Pages

7 October 2026

Carbon fiber-reinforced polymer (CFRP) driveshafts offer significant lightweight potential, but the performance of pin-loaded joints is strongly affected by laminate architecture. To support laminate selection beyond peak strength alone, a numerical...

(This article belongs to the Special Issue Advances in Enhancement and Functionalization of Polymer Composites)
  • Article
  • Open Access
2,371 Views
34 Pages

6 October 2026

Lead-free polymer composites are being developed to reduce occupational radiation exposure associated with nuclear medicine procedures. This study fabricated monolithic and four-layer hybrid Bi2O3/WO3 nanoparticle-filled diglycidyl ether of bisphenol...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
451 Views
25 Pages

6 October 2026

Yams (Dioscorea spp.) are tubers with high agro-industrial potential due to their elevated starch content; however, their use remains mainly limited to fresh consumption. This study aimed to comparatively evaluate the physicochemical, functional, mor...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
376 Views
19 Pages

Atomic-Scale Reaction Mechanism of Impact Ignition in Al/Si/PTFE Reactive Materials

  • Liangfei Gong,
  • Lieke Ma,
  • Xiaomalong Pu,
  • Bo Li and ,
  • Yulian Liu,
  • Ao Mei and
  • Jie Wang
  • + 2 authors+ 0 author

6 October 2026

Non-metallic polytetrafluoroethylene (PTFE)-based reactive materials (RMs) exhibit relatively high energy density; however, the low shock sensitivity hinders their widespread application in space debris protection. To develop lightweight, high-energy...

(This article belongs to the Special Issue Advances in Mechanical Performance of Polymer Materials)
  • Article
  • Open Access
506 Views
17 Pages

Effect of Printing Angle on Mechanical Properties of Fused Filament Fabrication (FFF)-Printed Polymers for Below-Knee Prosthetic Sockets: An Experimental and Finite Element Analysis Study

  • Ismail Boudjemaa,
  • Omar Khatir,
  • Abdelkader Benkhettou,
  • Bel Abbes Bachir Bouiadjra and ,
  • Abdrahmene Sahli,
  • Murat Yaylacı,
  • Dursun Murat Sekban,
  • Yılmaz Güvercin,
  • Ecren Uzun Yaylacı and
  • Muhammet Kalkışım
  • + 5 authors+ 0 author

6 October 2026

This study investigates the influence of printing angle on the mechanical performance of 3D-printed prosthetic sockets through an integrated experimental and computational approach. Tensile tests were conducted on Acrylonitrile Butadiene Styrene (ABS...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
436 Views
18 Pages

Fabrication of Electrospun PAN–CNT–CNC Composite Nanofiber Films for Hydrovoltaic Energy Harvesting

  • Hee Chang Jeon,
  • Woohyuk Jang,
  • Jiseon Yun,
  • Sein Min and ,
  • Joong Yeon Lim and
  • Young-Seong Kim
  • + 1 author+ 0 author

6 October 2026

Water-induced electrical responses were investigated using porous electrospun PAN-based composite membranes containing CNTs and CNCs. Following the injection of 20 μL of a 2 wt% NaCl solution, transient open-circuit voltage responses were observed...

(This article belongs to the Special Issue Polymer Thin Films: Synthesis, Properties, and Multifunctional Applications)
  • Article
  • Open Access
441 Views
22 Pages

Lignin–Hydroxypropyl-β-Cyclodextrin Matrix for Chlorzoxazone Loading and Release: Physicochemical, Antioxidant, and Antimicrobial Characterization

  • Andreea Creteanu,
  • Narcis Anghel,
  • Cornelia Vasile,
  • Gabriela Lisa and ,
  • Claudiu N. Lungu and
  • Graţiela Popa
  • + 1 author+ 0 author

5 October 2026

Chlorzoxazone (CLZ) is a poorly water-soluble drug whose formulation may benefit from carrier systems capable of drug incorporation and controlled release. This study investigated an epichlorohydrin (ECH)-mediated lignin–hydroxypropyl-β-cy...

(This article belongs to the Special Issue Lignocellulosic Materials: From Fractionation to Multifunctional Applications)
  • Article
  • Open Access
398 Views
15 Pages

Conductive Alginate–Carbon-Black Bioanode for Immediate Microbial Electrolysis Cell Operation

  • Abhishiktha Chiliveru,
  • Vamshi Krishna Bommagani,
  • Avinash Jukanti,
  • Irina Amar Dubrovin and ,
  • Alex Schechter and
  • Rivka Cahan
  • + 1 author+ 0 author

5 October 2026

This study investigated alginate-immobilized planktonic electroactive bacteria directly coated onto a carbon-felt anode as an alternative bioanode configuration without prolonged biofilm development. Carbon-black (CB) nanoparticles were incorporated...

(This article belongs to the Special Issue Advanced Environmentally Friendly Polymeric Materials and Their Applications, 2nd Edition)
  • Article
  • Open Access
400 Views
26 Pages

5 October 2026

Chiral auxetic lattices convert axial loading into node rotation, producing negative Poisson’s ratios and high energy absorption. This purely numerical study establishes a quasi-static baseline for additively manufacturable polyamide-12 (PA12)...

(This article belongs to the Section Polymer Physics and Theory)
  • Article
  • Open Access
380 Views
14 Pages

A Simple Method for Polymer Screening for Selection of Food Packaging Material

  • Costas Tsioptsias,
  • Konstantina Konstantopoulou and
  • Karmen Nanakou

5 October 2026

The requirements and specifications of food packaging materials are continuously increasing, e.g., due to new regulations. Selection of a proper material is a multi-criteria decision, and various aspects must be considered. In this work, a simple met...

(This article belongs to the Special Issue Polymeric Materials for Food Packaging: Fundamentals and Applications)
  • Article
  • Open Access
423 Views
18 Pages

Enhanced Interfacial Adhesion and Dynamic Seawater Durability of Basalt Fiber/Epoxy Composites via PDA-Assisted In Situ Growth of UiO-66-NH2

  • Yingquan Zhou,
  • Guoqian Xie,
  • Bin Wang,
  • Chunxia Zhao and ,
  • Hui Li and
  • Dong Xiang
  • + 1 author+ 0 author

5 October 2026

Durable basalt fiber-reinforced polymer (BFRP) composites are needed for marine and offshore structures, where seawater exposure and hydrodynamic shear progressively degrade the fiber–matrix interface. To address this challenge, a hierarchical...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
338 Views
27 Pages

5 October 2026

Waste quartz sand (WQS), a silica-rich by-product of the glass manufacturing industry, is commonly disposed of, creating environmental and resource-management concerns. This study addresses the limited knowledge regarding the use of WQS as a mineral-...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
353 Views
22 Pages

Decoding the Hydrogen-Transfer Synergy in Camellia oleifera Shell Hydrochar/HDPE Co-Pyrolysis: A Kinetic and Thermodynamic Perspective

  • Akash Kumar,
  • Lata Kumari,
  • Asma Leghari,
  • Azhar Ali Laghari and ,
  • Imtiaz Ali Jamro,
  • Moses Akintayo Aborisade,
  • Belay Tafa Oba,
  • Qiuxia Meng and
  • Qiang Zhang
  • + 4 authors+ 0 author

4 October 2026

This study examined the co-pyrolysis of high-density polyethylene (HDPE) and hydrochar from Camellia oleifera shell (HCS), focusing on thermal decomposition behavior, non-isothermal kinetics, thermodynamics, and the interaction mechanism between the...

(This article belongs to the Special Issue Advances in Polymer Materials Derived from Biomass and Waste)
  • Article
  • Open Access
482 Views
20 Pages

Preparation and Characterization of Immediate-Release Tablets Containing Calcium Lactate Recovered from Chemically Recycled Poly(lactic acid) 3D Printing Filaments

  • Olivia A. Attallah,
  • Dario Brandao,
  • Jacqueline Tran,
  • Irvin Rivera and ,
  • Cindy A. Thomas-Charles,
  • Michael R. O’Krepky and
  • Mathew Mannon
  • + 2 authors+ 0 author

4 October 2026

Polylactic acid (PLA) is one type of biodegradable plastic that can replace single-use plastic. Nevertheless, it still poses the problem of accumulation in the environment due to the slow biodegradation rate. Developing simple yet effective methods f...

(This article belongs to the Special Issue Depolymerization: Challenges and Future Trends)
  • Review
  • Open Access
380 Views
28 Pages

Functional Polymer-Based Biomaterials for Corneal Tissue Engineering: An Indication-Guided Review of Design Trade-Offs

  • Xinyue Zhang,
  • Ruocheng Zhao,
  • Yang Xu,
  • Lei Sun and ,
  • Yang Yang and
  • Min Jiang
  • + 1 author+ 0 author

4 October 2026

Corneal disease is a cause of vision loss worldwide, while conventional keratoplasty is constrained by limited donor tissue and immune rejection. This indication-guided review examines functional polymer platforms for corneal tissue engineering, incl...

(This article belongs to the Special Issue Functional Polymers for Tissue Engineering)
  • Article
  • Open Access
383 Views
20 Pages

An Efficient Descriptor for Tubular LDPE Melt Strength via Physics-Guided Learning and Diffusion-Based Inverse Design

  • Yifei Wang,
  • Guogang Liu,
  • Lin Liu,
  • Yue Yu and ,
  • Peiqian Yu,
  • Linge Ma,
  • Linlin Wei,
  • Zhe Zhou,
  • Linfeng Chen and
  • Rongjuan Cong
  • + 6 authors+ 1 author

4 October 2026

Melt strength (MS) is a key parameter governing the processability and application of low-density polyethylene (LDPE), dictated by a complex interplay of molecular weight distribution (MWD), long-chain branching (LCB), and high-molecular-weight conte...

(This article belongs to the Special Issue Advances in Olefin Polymerization and Polyolefin)
  • Article
  • Open Access
334 Views
22 Pages

4 October 2026

Fiber–metal laminates (FMLs) are hybrid structures manufactured using alternating layers of aluminium alloy and epoxy-reinforced E-glass fabric, with the stacking sequence [Al/Glass/Al/Glass/Al], offering high specific strength, fatigue resista...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Review
  • Open Access
334 Views
29 Pages

3 October 2026

Polymeric composites have become indispensable engineering materials owing to their exceptional mechanical performance, lightweight characteristics, corrosion resistance, and design flexibility. Conventional computational approaches, including densit...

(This article belongs to the Special Issue Advanced Natural Polymers: Synthesis, Characterization and Applications: 2nd Edition)
  • Article
  • Open Access
337 Views
22 Pages

Processing of PVDF/Nb5+ and Sr2+-Doped PZT Composites for Applications in Advanced Dielectric Insulation: Effect of Ceramic Loading on Structure, Mechanical Properties, Electrical Properties, and Thermal Aging Behavior

  • Alina Ruxandra Caramitu,
  • Romeo Cristian Ciobanu,
  • Alina Iulia Dumitru,
  • Eduard-Marius Lungulescu and ,
  • Magdalena Valentina Lungu,
  • Virgil Emanuel Marinescu and
  • Alexandru Chirica
  • + 2 authors+ 0 author

3 October 2026

In this study, four types of materials suitable for use as special insulation were produced. Polyvinylidene fluoride (PVDF) served as the polymer matrix, while PZT powders (a Pb(Zr0.52Ti0.48)O3 system doped with Nb5+ and Sr2+) were used as the filler...

(This article belongs to the Section Smart and Functional Polymers)
  • Article
  • Open Access
348 Views
23 Pages

Activation of the Internal Surfaces of Polymer Tubes with Argon Plasma Through Hollow Cathode Effect

  • Jang-Hsing Hsieh,
  • Jyh Wei Lee,
  • Chuan Li,
  • Stephen Hsieh and ,
  • Shin Yo Shen and
  • Nima Bolouki
  • + 1 author+ 0 author

3 October 2026

The focus of this study is on generating hollow cathode discharge (HCD) plasma inside three types of polymer tubes, resulting in the activation of the tubes’ inner surfaces. To achieve this goal, both theoretical calculations and experiments we...

(This article belongs to the Special Issue Advances in Plasma-Modified Polymeric Materials for Surface Functionalization and Applications)
  • Article
  • Open Access
423 Views
27 Pages

2 October 2026

Biodegradable porous microspheres hold considerable promise as regenerative fillers, injectable biomaterials, tissue-engineering scaffolds, and drug-delivery carriers; however, how polymer properties and amphiphilic modification jointly influence por...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
307 Views
25 Pages

2 October 2026

Despite growing interest in hybrid unidirectional-tape/woven-fabric (UD/WF) composite laminates, the relationship between impact energy, macroscopic response, and multiscale damage evolution under low-velocity impact remains insufficiently understood...

(This article belongs to the Special Issue Mechanical Properties of Polymer Composites: Progress and Prospects)
  • Article
  • Open Access
332 Views
13 Pages

Ramie Elementary Fiber-Reinforced Chitosan Composite Films: Mechanical Properties and Structural Characterization

  • Hongbo Li,
  • Jiamin Wang,
  • Pengchen Lu,
  • Yaping Liu and ,
  • Yu Xian and
  • Yanqing Zhang
  • + 1 author+ 0 author

2 October 2026

Chitosan films have attracted increasing attention as biodegradable packaging materials; however, their relatively low stiffness and limited mechanical stability restrict their practical application. In this study, ramie elementary fiber-reinforced c...

(This article belongs to the Special Issue Advances in Chitosan-Based Composites: Manufacturing, Characterization, and Application)
  • Article
  • Open Access
396 Views
33 Pages

Low-Velocity Impact Response of Biaxial Glass-Fiber Fabric Composites: Influence of Fabric Layer Number Under Progressively Increasing Impact Energy

  • George Cătălin Cristea,
  • Lorena Deleanu,
  • Maria Gherghișan,
  • Mario Constandache and ,
  • Claudiu Marian Martin,
  • Ioana Gabriela Chiracu,
  • Cătălin Pîrvu and
  • Alina Dragomirescu
  • + 3 authors+ 0 author

2 October 2026

Glass-fiber-reinforced polymer composites are of interest for lightweight structural applications, including marine structures, where accidental low-velocity impact is an important design consideration. This study investigates the low-velocity impact...

(This article belongs to the Special Issue Advanced Experimental Mechanics in Polymer Composites Testing)
  • Article
  • Open Access
268 Views
37 Pages

2 October 2026

The overconsumption of traditional plastic products causes serious white pollution and ecological pressure. Bio-based composites derived from natural polymers have emerged as promising sustainable alternatives. This work preliminarily fabricates star...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
439 Views
30 Pages

mPEG-b-PCL-Based Nanoformulations of Aziridine-Functionalized 1,3,5-Triazine Derivative for Cancer Treatment

  • Irina Bagaeva,
  • Ekaterina Sinitsyna,
  • Yuliia Zmitrichenko,
  • Gregorii Tochilnikov and ,
  • Elena Tupikina,
  • Sergei Silonov,
  • Mikhail Orlov,
  • Viktor Korzhikov-Vlakh and
  • Evgenia Korzhikova-Vlakh
  • + 4 authors+ 0 author

2 October 2026

Developing nanoformulations of antitumor drugs represents a critical priority in addressing key challenges of free drug administration such as low therapeutic efficacy, poor bioavailability, and severe side effects, including high systemic toxicity....

(This article belongs to the Special Issue Advanced Polymeric Biomaterials for Drug Delivery Applications)
  • Article
  • Open Access
426 Views
18 Pages

Influence of Low TiO2 Nanoparticle Loading on Electrospun sPEEK Fiber Morphology and Chemistry and on the Tensile Properties of Corresponding Solution-Cast Membranes

  • Dayana Llumiquinga,
  • Luis Criollo,
  • Wilson Navas-Pinto,
  • Germán Omar Barrionuevo and ,
  • Jhon Luna-Jaén,
  • Xavier Sánchez-Sánchez and
  • Santiago D. Puma-Araujo
  • + 2 authors+ 0 author

2 October 2026

Polymer matrix composites (PMCs) have garnered importance due to their unique combination of mechanical, thermal, and functional properties. However, their performance depends on overcoming challenges related to dispersion, bonding, and processing. E...

(This article belongs to the Special Issue Electrospinning of Polymer Systems)
  • Article
  • Open Access
356 Views
21 Pages

2 October 2026

Myocardial infarction causes scar tissue formation and poor electrical conduction. Cardiac patches are used to functionally support damaged cardiac tissue. Electrospun polycaprolactone (PCL) membranes, one of the most investigated biocompatible and b...

(This article belongs to the Special Issue From Nature to Innovation: Biodegradable and Biocompatible Polymer Materials)
  • Article
  • Open Access
340 Views
20 Pages

2 October 2026

Titanium dioxide (TiO2) nanoparticles (NPs) can improve the performance of 3D-printed denture base resins; however, the reinforcing benefit depends on achieving uniform dispersion, and the effect of probe-sonication time on NP dispersion remains uncl...

(This article belongs to the Special Issue Advanced 3D-Printed Composite Materials Based on Resins: Processes and Applications)
  • Article
  • Open Access
388 Views
20 Pages

Cellulose-Based Wet Wipes Combining Essential Oils and Sodium Hypochlorite: A Sustainable Strategy for Bacterial Control

  • Zorica Tomičić,
  • Milorad Miljić,
  • Ljubiša Šarić,
  • Dragana Tomanić and ,
  • Miloš Pelić,
  • Milica Nićetin and
  • Ružica Tomičić
  • + 2 authors+ 0 author

2 October 2026

The development of antimicrobial formulations for biodegradable wet wipes is of increasing interest for more sustainable hygiene applications. Objectives: This study aimed to develop and evaluate a cellulose-based antimicrobial wipe formulation by co...

(This article belongs to the Special Issue Polymers in Tissue Regeneration and Antimicrobial Strategies: Innovations and Applications)
  • Article
  • Open Access
277 Views
17 Pages

The Effect of Silicone Modification on the Thermo-Oxidative Degradation and Mechanical Property Retention of CFRP Laminates

  • Junkang Xia,
  • Yundong Ji,
  • Jingang Liu,
  • Dongfeng Cao and ,
  • Wei Cai,
  • Hongda Chen,
  • Lei Wang,
  • Shichao Wu and
  • Shuxin Li
  • + 4 authors+ 0 author

2 October 2026

The mechanical properties of CFRP laminates degrade significantly in extreme thermal environments above the onset temperature of thermo-oxidative degradation of the matrix. This study investigates the thermo-oxidative damage evolution and mechanical...

(This article belongs to the Section Polymer Applications)

of 3

XFacebookLinkedIn
Polymers - ISSN 2073-4360