Materials, Volume 12, Issue 8

A series of composites was prepared from a diglycidyl ether of bisphenol A (DGEBA) with different graphene filler contents to improve their mechanical performance and thermal stability. Graphene oxide (GO) and GO modified with hexamethylene tetraamin...

Small concentrations of alloying elements can modify the α - γ phase transition temperature T c of Fe. We study this effect using an atomistic model based on a set of many-body interaction potentials for iron and several...

A tetragonal distortion of the long-time known NaTl structure at 298 K was observed in different experimental setups, including Zintl’s original procedure of reducing Tl(I)-iodide by sodium liquid ammonia solutions. The powder diffraction patte...

This work aims to show the feasibility of an innovative approach for the manufacturing of organic-based devices with a true three-dimensional and customizable structure that is made possible by plastic templates, fabricated by additive manufacturing...

Stabilized un-doped Zinc Telluride (ZnTe) thin films were grown on glass substrates under vacuum using a closed space sublimation (CSS) technique. A dilute copper nitrate solution (0.1/100 mL) was prepared for copper doping, known as an ion exchange...

The oxygen steelmaking process in a Linz-Donawitz (LD) converter is responsible for more than 70% of annual crude steel production. Optimization of the process control and numerical simulation of the LD converter are some of the current challenges in...

Here, butylene adipate-co-terephthalate/polypyrrole with nanohydroxyapatite (PBAT/PPy/nHAp) scaffolds were fabricated and characterized. The electrospinning process was carried out using 12 kV, a needle of 23 G, an infusion pump set at 0.3 mL/h, and...

Two-dimensional arrays of hollow nanotubes made of TiO 2 are a promising platform for sensing, spectroscopy and light harvesting applications. Their straightforward fabrication via electrochemical anodization, growing nanotube pillars of fini...

Selective laser melting (SLM) has been used in many fields recently, especially in the aerospace field. Many studies have been done on mechanical properties of the printed parts, but the dimension accuracy of the inner structure received little atten...

Efficient synthesis of silicon phthalocyanines (SiPc) eliminating the strenuous reaction conditions and hazardous reagents required by classical methods is described. Implementation into organic thin-film transistors (OTFTs) affords average electron...