February-1 2019 - 242 articles
Mutual inductance between finite-length coaxial helical filaments and tape coils are presented analytically. In this paper, a mathematical model for finite-length coaxial helical filaments is established, and subsequently, the mutual inductance of th...
Currently, there is growing interest in the modeling of high concentrator photovoltaic modules, due to the importance of achieving an accurate model, to improve the knowledge and understanding of this technology and to promote its expansion. In recen...
In competitive power markets, electric utilities, power producers, and traders are exposed to increased risks caused by electricity price volatility. The growing reliance on renewable sources and their dependence on weather, nuclear uncertainty, mark...
The use of hydrogen as a non-emission energy carrier is important for the innovative development of the power-generation industry. Transmission pipelines are the most efficient and economic method of transporting large quantities of hydrogen in a num...
This work introduces the concept of flexible operation in the design of solar thermal utility systems for low temperature processes. The design objectives are: (a) The supply of the thermal needs of the process (heat duty and minimum required tempera...
This paper proposes a virtual impedance-based bandwidth control method for multi-parallel harmonic-compensation grid-connected inverters (HCGIs). Firstly, the influence of the resonance points caused by the interaction of multiple HCGIs on the contro...
As a competitive small-scale turbomachinery option, Tesla turbines have wide potential in various fields, such as renewable energy generation systems and small power equipment. This paper investigates the influence of disc tip geometry, including its...
Waste activated sludge (WAS) is a byproduct of municipal wastewater treatment. WAS contains a large proportion of inactive microbes, so when it is used as a substrate for anaerobic digestion (AD), their presence can interfere with monitoring of activ...
In order to successfully deploy a large number of decentralized energy systems in developing countries, it is necessary to standardize effective methodologies and procedures to develop off-grid/mini-grid systems. Considering that the energy need asse...
Parameter identification in load models is a critical factor for power system computation, simulation, and prediction, as well as stability and reliability analysis. Conventional point estimation based composite load modeling approaches suffer from d...
of 25
Get Alerted
Add your email address to receive forthcoming issues of this journal.
