26 Results Found

Composite materials with different concentration ratios of a hybrid of zero-dimensional (0-D) Cs4PbBr6 perovskite, which acts as a donor (D), and poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV), which acts as an acceptor (A), were...

All-inorganic perovskite solar cells are attractive photovoltaic devices because of their excellent optoelectronic performance and thermal stability. Unfortunately, the currently used efficient inorganic perovskite materials can spontaneously transfo...

Perovskite solar cells (PSCs) have substantially increased their power conversion efficiency (PCE) to more than 25% in recent years. However, the instability of these devices is still a strong obstacle for their commercial applications. Recently, all...

Materials and processing of transparent electrodes (TEs) are key factors to creating high-performance translucent perovskite solar cells. To date, sputtered indium tin oxide (ITO) has been a general option for a rear TE of translucent solar cells. Ho...

High-quality, all-inorganic CsPbBr3/Cs4PbBr6 composite perovskite nanocrystals (NCs) were obtained with all-solution-processing at room temperature, and a photodetector (PD) with high detectivity was realized based on CsPbBr3/Cs4PbBr6 NCs. The detect...

This study presents the first comprehensive theoretical investigation utilizing SCAPS-1D simulation to systematically evaluate eight hole transport materials for CsPbI2Br perovskite solar cells under authentic indoor LED conditions (560 lux, 5700 K c...

This study explores the use of Cu dopant to improve the optoelectronic properties and stability of CsPbX3 perovskites for blue-light-emitting diode material. The addition of Cu causes the metal octahedron of orthorhombic CsPbBr3 to shrink, which rela...

The superior optical properties of lead-halide perovskites (LHPs) inspired significant research in cell imaging applications; many encapsulating processes have improved perovskite stabilities with comparable biosafety. Herein, facile solvent evaporat...

The anion exchange of the halides, Br and I, is demonstrated through the direct mixing of two pure perovskite quantum dot solutions, CsPbBr3 and CsPbI3, and is shown to be both facile and result in a completely alloyed single phase mixed halide perov...

The variable bandgap and high absorption coefficient of all-inorganic halide perovskite quantum dots (QDs), particularly CsPbBr2I make them highly promising for photodetector applications. However, their high defect density and poor stability limit t...

Perovskite quantum dots (QDs), emerging with excellent bright-green photoluminescence (PL) and a large absorption coefficient, are of great potential for the fabrication of light sources in underwater optical wireless communication systems. However,...

Lead halide perovskite nanoplatelets (NPls) attract significant attention due to their exceptional and tunable optical properties. Doping is a versatile strategy for modifying and improving the optical properties of colloidal nanostructures. However,...

The ion pairs [Cs+•TtX3−] (Tt = Pb, Sn, Ge; X = I, Br, Cl) are the building blocks of all-inorganic cesium tetrel halide perovskites in 3D, CsTtX3, that are widely regarded as blockbuster materials for optoelectronic applications such as i...

Inexpensive perovskite light-emitting devices fabricated by a simple wet chemical approach have recently demonstrated very prospective characteristics such as narrowband emission, low turn-on bias, high brightness, and high external quantum efficienc...

Light-emitting diodes (LEDs) based on perovskite materials are a new group of devices that are currently undergoing rapid development. A significant fraction of these devices is based on quasi-2D perovskites fabricated with large organic cations. In...

The present contribution aims to enhance solar cells’ performance via the development of advanced luminescent down-shifting based on encapsulated nanostructured perovskite materials. Here, thin films of inorganic lead halide (CsPbBr3) perovskit...

High precision-controlled movement of microscale devices is crucial to obtain advanced miniaturized motors. In this work, we report a high-speed rotating micromotor based on two-dimensional (2D) all-inorganic perovskite CsPbBr3 microplates controlled...

Monolayer MoS2 has been widely researched in high performance phototransistors for its high carrier mobility and strong photoelectric conversion ability. However, some defects in MoS2, such as vacancies or impurities, provide more possibilities for c...

Halide based perovskite offers numerous advantages such as high-efficiency, low-cost, and simple fabrication for flexible solar cells. However, long-term stability as well as environmentally green lead-free applications are the real challenges for th...

Despite the remarkable progress in perovskite solar cells (PSCs), their instability and rapid degradation over time still restrict their commercialization. A 2D capping layer has been proved to overcome the stability issues; however, an in-depth unde...

Metal halide perovskites have become a research highlight in the optoelectronic field due to their excellent properties. The perovskite light-emitting diodes (PeLEDs) have achieved great improvement in performance in recent years, and the constructio...

We report a hollow-core negative-curvature fiber (HC-NCF) optical signal amplifier fabricated by the filling of the air microchannels of the fiber with all-inorganic CsPbBr3 perovskite nanocrystals (PNCs). The optimum fabrication conditions were foun...

All-inorganic perovskites, with their low-cost, simple processes and superior heat stability, have become potential candidate materials for photodetectors (PDs). However, they have no representative responsivity in the deep-ultraviolet (UV) wavelengt...

Despite the ideal performance demonstrated by mixed perovskite materials when used as active layers in photovoltaic devices, the factor which still hampers their use in real life remains the poor stability of their physico-chemical and functional pro...

Donor–acceptor (D–A) small molecules are regarded as promising hole-transporting materials for perovskite solar cells (PSCs) due to their tunable optoelectronic properties. This paper reports the design, synthesis and characterization of...

Two-dimensional (2D) colloidal CsPbBr3 nanosheets (NSs) possess size-dependent optoelectronic properties; however, conventional hot-injection methods often lack precise growth control and well-ordered superlattice self-assembly. Herein, we introduce...