Materials

Mechanical Properties and Strengthening Mechanism of New Superalloys

edited by

, Weihong Zhang and Yubi Gao

submission deadline 20 Oct 2025 | 3 articles | Viewed by 2924 | Submission Open

Keywords: Ni-based wrought superalloy; twin boundary; twinning strengthening; stacking fault; microstructure; mechanical property

(This special issue belongs to the Section Metals and Alloys)

Advances in Wood-Based Composites from Alternative Lignocellulosic Raw Materials

edited by

Petar Antov

and Valentina Lo Giudice

submission deadline 20 Oct 2025 | 2 articles | Viewed by 2774 | Submission Open

Keywords: wood-waste-based composites; lignocellulosic composites; recycling; recovered wood; post-consumer wood; cascading use of wood; circular economy; life cycle assessment; biopolymer composites; binderless wood composites; reinforced composite structures; mechanical properties; nanotechnology and nanomaterials in wood composites

(This special issue belongs to the Section Green Materials)

Research on Zeolites and Zeolite-Like Materials: Synthesis, Structure, Properties and Application

edited by

Beata Anwajler

, Daniel Smykowski and Piotr Szulc

submission deadline 20 Oct 2025 | 3 articles | Viewed by 2764 | Submission Open

Keywords: zeolites; zeolite-like materials; synthesis; structure; properties; application

(This special issue belongs to the Section Porous Materials)

Study on Electrochemical Behavior and Corrosion of Materials

edited by

Raul Figueroa

, Gloria Pena and David Álvarez

submission deadline 20 Oct 2025 | 5 articles | Viewed by 2750 | Submission Open

Keywords: corrosion protection; coating; electrochemical behavior; corrosion inhibitors; passivation; EIS; surface modification; corrosion control; surface pretreatments

(This special issue belongs to the Section Corrosion)

Processing of End-of-Life Materials and Industrial Wastes (3rd Edition)

edited by

Ndue Kanari

submission deadline 20 Oct 2025 | 2 articles | Viewed by 2642 | Submission Open

Keywords: low-grade raw materials; end-of-life materials; industrial wastes and by-products; rare earth elements (REE) ores and concentrates; Li; Ta-Nb-Sn raw materials; thermochemical and combined methods for processing; extractive metallurgy; dry halogenation (chlorination); thermodynamics and kinetics; valuable; critical and strategic elements (CRMs); extraction and recovery; recycling and reuse; green chemistry/process; waste decontamination; soil remediation

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advances in Plasma Treatment of Materials

edited by

Mirosław Dors

submission deadline 20 Oct 2025 | 5 articles | Viewed by 2590 | Submission Open

Keywords: plasma deposition; plasma etching; plasma treatment of materials; surface activation; surface functionalization; plasma for material fabrication; waste decomposition

(This special issue belongs to the Section Manufacturing Processes and Systems)

Finite Element Analysis and Fracture Control in Steels and Non-ferrous Alloys

edited by

Teresa Fra̧ś

and

Piotr Pawłowski

submission deadline 20 Oct 2025 | 2 articles | Viewed by 2325 | Submission Open

Keywords: fracture mechanics; fracture control; fracture onset and propagation; material toughness; computational modeling in fracture mechanics; failure prediction; testing methods in fracture mechanics; structural integrity; stress analysis; durability

(This special issue belongs to the Section Materials Simulation and Design)

Advanced Functional Materials toward Sustainable Development Technologies: Prospects and Challenges (Second Edition)

edited by

Menglei Yuan

submission deadline 20 Oct 2025 | 2 articles | Viewed by 2268 | Submission Open

Keywords: heterogeneous catalysis; small-molecule activation; functional batteries; green electro-organic synthesis; energy storage; separation processes

(This special issue belongs to the Section Green Materials)

Additive Manufacturing and Forming Technologies of Alloy: Mechanical Properties and Microstructure Evaluation

edited by Yunping Li

submission deadline 20 Oct 2025 | 2 articles | Viewed by 2229 | Submission Open

Keywords: additive manufacturing; superalloys; powder metallurgy; microstructure; mechanical property; near net shape forming

(This special issue belongs to the Section Manufacturing Processes and Systems)

Recent Progress in Sustainable Construction Materials

edited by

Daoyuan Sun

, Hongwei Wang and

Fang Yan

submission deadline 20 Oct 2025 | 2 articles | Viewed by 1994 | Submission Open

Keywords: sustainable construction; eco-friendly materials; waste recycling; resource efficiency; performance evaluation; concrete optimization; mining backfill; roadbed materials; artificial intelligence; environmental impact; safety and sustainability

(This special issue belongs to the Section Construction and Building Materials)

Advances in Microstructure and Sustainability of Geopolymers and Alkali Activated Materials

edited by

Shima Pilehvar

,

Mahdi Kioumarsi

and Davoud Tavakoli

submission deadline 20 Oct 2025 | 2 articles | Viewed by 1959 | Submission Open

Keywords: geopolymers; alkali-activated materials; sustainable construction; microstructure; CO2 reduction; mechanical properties; durability; recycling; industrial by-products

(This special issue belongs to the Section Construction and Building Materials)

Innovative Utilization of Biomass for Sustainable Energy Production

edited by Tomasz K. Suchocki

submission deadline 20 Oct 2025 | 2 articles | Viewed by 1944 | Submission Open

Keywords: biomass; sustainable energy; biomass conversion; biofuel; biomass energy

(This special issue belongs to the Section Energy Materials)

Ferroelectrics and Antiferroelectrics: Microstructures, Properties and Applications

edited by Ying Liu

submission deadline 20 Oct 2025 | 2 articles | Viewed by 1934 | Submission Open

Keywords: ferroelectrics; antiferroelectics; microstructure– property relationship; electronic devices; energy harvesting and conversion

(This special issue belongs to the Section Electronic Materials)

Electrochemical Materials and Devices for Energy Conversion and Storage—2nd Edition

edited by

Bang-An Lu

submission deadline 20 Oct 2025 | 3 articles | Viewed by 1914 | Submission Open

Keywords: fuel cells; metal– ion batteries; flow batteries; metal– sulfur (selenium) batteries; metal– air batteries; supercapacitors; electrode materials; electrocatalysts; membranes; electrolytes

(This special issue belongs to the Section Energy Materials)

High-Performance Semiconductor Materials for Efficient Photoelectric Devices

edited by Qian Li, Feiliang Chen, Feng Xie and Yudan Gou

submission deadline 20 Oct 2025 | 1 articles | Viewed by 1903 | Submission Open

Keywords: metal– organic chemical vapor deposition (MOCVD); semiconductor nanomaterials; semiconductor optoelectronic materials; III-V semiconductor material; wide-band semiconductor materials and devices

(This special issue belongs to the Section Electronic Materials)

Effects of Adding Cement Admixtures on the Microstructure and Properties of Cement Materials (2nd Edition)

edited by Hongwei Wang and Ying Shi

submission deadline 20 Oct 2025 | 3 articles | Viewed by 1864 | Submission Open

Keywords: cement admixtures; microstructure; hydration process; mechanical properties; durability; compressive strength; tensile strength; chemical admixtures; supplementary cementitious materials (SCMS); cement paste; concrete performance; permeability; shrinkage; cracking resistance; sustainable construction materials; high-performance concrete; carbon emissions reduction; durability enhancement

(This special issue belongs to the Section Construction and Building Materials)

Performance-Related Material Properties of Asphalt Mixture Components (3rd Edition)

edited by

,

,

and

submission deadline 20 Oct 2025 | 2 articles | Viewed by 1813 | Submission Open

Keywords: asphalt binder; asphalt mixtures; asphalt pavement; aggregate; recycled materials; distress; material properties; numerical modelling

(This special issue belongs to the Section Construction and Building Materials)

Biomaterials Modification, Characterization and Applications

edited by

Wanjun Liu

submission deadline 20 Oct 2025 | 1 articles | Viewed by 1785 | Submission Open

Keywords: biomaterials; tissue engineering; drug delivery; biomedicine

(This special issue belongs to the Section Biomaterials)

Innovations in Digital Dentistry: Novel Materials and Technologies

edited by Marcia Borba and Paula Benetti

submission deadline 20 Oct 2025 | 3 articles | Viewed by 1527 | Submission Open

Keywords: dental materials; intraoral scanning; 3D printing; CAD/CAM; artificial intelligence

(This special issue belongs to the Section Biomaterials)

Advances in Electrostatic Spinning Micro and Nano Fibers

edited by

Wenling Jiao

submission deadline 20 Oct 2025 | 1 articles | Viewed by 1457 | Submission Open

Keywords: polymer or ceramic fibers; state-of-the-art electrospinning methods; optimization of electrospun fiber properties; various applications of electrospun fiber materials

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Advanced Energy Materials for Perovskite Solar Cells

edited by Pingping Sun

submission deadline 20 Oct 2025 | 1 articles | Viewed by 1451 | Submission Open

Keywords: perovskite solar cells; organic– inorganic hybrid materials; advanced and functional materials; photovoltaic performance; transport properties; thin films; materials processing and characterization; electron and hole transport materials; theoretical and experimental approach

(This special issue belongs to the Section Energy Materials)

Materials Informatics and Machine Learning in Pavement Engineering

edited by

Jin Li

and Gengren Hao

submission deadline 20 Oct 2025 | 2 articles | Viewed by 1424 | Submission Open

Keywords: material informatics; data analytics; machine learning; pavement engineering; construction materials; material design; performance prediction; inverse design

(This special issue belongs to the Section Construction and Building Materials)

Adsorptive and Catalytic Materials Used in Environmental Treatment

edited by

,

,

,

and Feng Chen

submission deadline 20 Oct 2025 | 2 articles | Viewed by 1395 | Submission Open

Keywords: adsorption; catalysis; water pollution control; advanced oxidation processes; hydrogen production; electrosorption; electrocoagulation; membrane technology; wastewater treatment; reaction mechanisms

(This special issue belongs to the Section Green Materials)

Preparation, Processing, and Application of Advanced Functional Carbon Materials (2nd Edition)

edited by

He Li

submission deadline 20 Oct 2025 | 2 articles | Viewed by 1367 | Submission Open

Keywords: diamond preparation and characterization methods; diamond applications in various field; carbon composite preparation and applications; graphite; graphene; carbon nanotube; and fullerene characterization and applications

(This special issue belongs to the Section Carbon Materials)

Material Characterization, Design and Modeling of Asphalt Pavements

edited by Weidong Cao,

Jizhe Zhang

,

Dedong Guo

and

Wengang Zhang

submission deadline 20 Oct 2025 | 2 articles | Viewed by 1320 | Submission Open

Keywords: asphalt; asphalt mix; asphalt pavement; pavement structure; material characterization; mix design; pavement design; modeling; simulation analysis

(This special issue belongs to the Section Construction and Building Materials)

Mechanical and Thermal Characterization of Novel Thermal Barrier Materials

edited by Dowon Song

submission deadline 20 Oct 2025 | 1 articles | Viewed by 1192 | Submission Open

Keywords: thermal barrier coatings; TBC materials; TBC evaluation; structure optimization; fabrication process; thermal durability

(This special issue belongs to the Section Thin Films and Interfaces)

Innovative Approaches to Enhancing Corrosion Resistance in Stainless Steel and Other Corrosion-Resistant Alloys

edited by

Saman Hosseinpour

,

Václav Šefl

and

Bright Okonkwo

submission deadline 20 Oct 2025 | 2 articles | Viewed by 1114 | Submission Open

Keywords: stainless steel; corrosion resistant alloys; localized corrosion; electrochemistry; passivation

(This special issue belongs to the Section Corrosion)

Corrosion, Fatigue and Corrosion Protection of Metals and Their Alloys in Various Environments (2nd Edition)

edited by

Florina Branzoi

submission deadline 20 Oct 2025 | 2 articles | Viewed by 1034 | Submission Open

Keywords: corrosion processes; electrochemical methods; corrosion protection; organic coatings; inorganic coatings; nanocomposite film; corrosion inhibitor; surface analysis; mechanical properties; microstructure; fatigue; metallic materials; computer modeling

(This special issue belongs to the Section Corrosion)

Sustainable Materials for Renewable Energy Application

edited by Izabela Piasecka, Patrycja Bałdowska-Witos and

Marek Opielak

submission deadline 20 Oct 2025 | 1 articles | Viewed by 970 | Submission Open

Keywords: sustainable development; clean technology; alternative energy sources; photovoltaic installations; solar installations; wind turbines; heat pumps; biomass installations; fuel cells; sustainable transport; electric vehicle components; alternative fuel systems; life cycle assessment; environmental impact; sustainable materials; bio-based materials; recycled materials; construction materials; smart materials; production techniques; material processing; recycling; energy-saving processes; energy-saving materials

(This special issue belongs to the Section Energy Materials)

Nanoparticle Assembly: Fundamentals and Applications

edited by

Alina Skorynina

and

Bo Xiao

submission deadline 20 Oct 2025 | 1 articles | Viewed by 959 | Submission Open

Keywords: nanoparticles; self-assembly; colloidal stability; material properties and characterization; biomedical application; nanomanufacturing and nanocomposites; nanoparticle assembles in electronics and optoelectronics; energy application and catalysis; environmental applications

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Microstructure, Mechanical Properties and Manufacturing Techniques of Advanced High-Entropy Alloys

edited by Dongyue Li

submission deadline 20 Oct 2025 | 1 articles | Viewed by 943 | Submission Open

Keywords: high-entropy alloys; high-entropy alloy fibers; strength-ductility trade-off; microstructural characterization; mechanical performance; phase transformations; advanced manufacturing techniques; size effects; low-temperature performance; deformation mechanisms; strengthening mechanisms

(This special issue belongs to the Section Metals and Alloys)

Additive Manufacturing of Metals and Alloys: Recent Advances and Challenges (2nd Edition)

edited by

Fei Lin

,

Fanghui Jia

, Jun Wang and Yao Lu

submission deadline 20 Oct 2025 | 2 articles | Viewed by 903 | Submission Open

Keywords: additive manufacturing; metals and alloys; materials design; microstructure characterization; mechanical properties; functional properties; manufacturing processes; preparation and application

(This special issue belongs to the Section Metals and Alloys)

Advances in Mechanical/Acoustic Metamaterials and Vibration/Noise Reduction Properties

edited by Jie Liu,

Zhenpei Wang

and Xi Liang

submission deadline 20 Oct 2025 | 1 articles | Viewed by 891 | Submission Open

Keywords: mechanical metamaterials; acoustic metamaterials; vibration/noise control; novel design/reverse design methods; multifunctional design; new mechanisms; manufacturing method; experimental testing

(This special issue belongs to the Section Materials Physics)

Functional UV-Curable Polymers and Their Composites: Synthesis, Properties and Applications

edited by

Agnieszka Kowalczyk

submission deadline 20 Oct 2025 | 1 articles | Viewed by 858 | Submission Open

Keywords: functional monomers; functional polymers; functional resins; functional materials; coatings; adhesives; UV curing; photopolymerization; controlled polymerizations techniques; composites

(This special issue belongs to the Section Polymeric Materials)

New Advances in Corrosion Inhibitor for Metals and Alloys

edited by

Omar Dagdag

submission deadline 20 Oct 2025 | 1 articles | Viewed by 843 | Submission Open

Keywords: corrosion inhibitors; metals and alloys; green inhibitors; nanotechnology; computational modeling; sustainable materials; electrochemical techniques; smart coatings; corrosion protection; advanced materials

(This special issue belongs to the Section Corrosion)

Advances in Photoelectric Materials: Preparation, Characterization, Properties, and Applications

edited by

Anna Starczewska

and

Mirosława Kȩpińska

submission deadline 20 Oct 2025 | 1 articles | Viewed by 812 | Submission Open

Keywords: photoelectric materials; optoelectronics; photodetectors; light sources; optical sensors; solar cells

(This special issue belongs to the Section Electronic Materials)

Numerical Simulation of Materials Processing

edited by Sudipta Biswas and Wen Jiang

submission deadline 20 Oct 2025 | 1 articles | Viewed by 771 | Submission Open

Keywords: modeling and simulation; advanced manufacturing; additive manufacturing; sintering; material evolution; process modeling; component modeling

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advances in Laser Processing Technology of Materials—Second Edition

edited by

Annalisa Volpe

and

Raffaele De Palo

submission deadline 20 Oct 2025 | 1 articles | Viewed by 690 | Submission Open

Keywords: laser material processing; simulation of laser material processing; laser– matter interaction; laser manufacturing; laser welding; laser ablation; laser micro and nano-machining; metamaterials laser fabrication; ultrashort laser pulses

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advances in Laser Welding and Laser Additive Manufacturing

edited by Danyang Lin, Hong Bian and Xiaoguo Song

submission deadline 20 Oct 2025 | 1 articles | Viewed by 681 | Submission Open

Keywords: additive manufacturing; hybrid manufacturing; laser welding; nano-manufacturing; repair and remanufacturing; alloys and their composites; shape memory alloys; biomaterials

(This special issue belongs to the Section Manufacturing Processes and Systems)

Dynamic Behavior of Laminated and Sandwich Composite Materials

edited by Dan Mihai Constantinescu

submission deadline 20 Oct 2025 | 1 articles | Viewed by 652 | Submission Open

Keywords: composites’ dynamic mechanical behavior; experimental techniques and numerical modeling and simulation; nanocomposites; fiber-reinforced; polymer; and metallic composites; smart; sustainable; multifunctional; and bioinspired composites; advanced metamaterials and structures; laminated and sandwich composite failure mechanisms; optimization and direct search algorithms

(This special issue belongs to the Section Advanced Composites)

Advances in Shape Memory Polymers: Preparation, Microstructure and Mechanical Properties

edited by

Wei Zhao

and Chengjun Zeng

submission deadline 20 Oct 2025 | 1 articles | Viewed by 594 | Submission Open

Keywords: shape memory polymers; intelligent materials; four-dimensional printing

(This special issue belongs to the Section Polymeric Materials)

Revisiting the Fundamentals: Synthesis of Metal Oxides

edited by

Vasile-Adrian Surdu

submission deadline 20 Oct 2025 | Viewed by 499 | Submission Open

Keywords: vapor condensation synthesis; vapor reaction synthesis; aerosol synthesis; chemical precipitation and coprecipitation; hydrothermal and solvothermal; sol– gel; pechini process; synthesis in microemulsions; sonochemical synthesis; solution combustion synthesis; electrochemical synthesis; synthesis in supercritical fluids; mechanical milling; mechanochemical processing; cryochemical processing; solid-state synthesis

(This special issue belongs to the Section Materials Chemistry)

Transforming Construction Industry: Advances and Perspectives in Sustainable Cementitious and Cementless Materials

edited by

Ofelia-Cornelia Corbu

,

Ionut Ovidiu Toma

, Sepehr Ghaffari and Dumitru Vasile Moldovan

submission deadline 20 Oct 2025 | Viewed by 470 | Submission Open

Keywords: supplementary cementitious materials; asphalt concrete; nano-materials; recycled aggregates; recycling industrial wastes; alternative aggregate; alternative binders; low carbon

(This special issue belongs to the Section Green Materials)

Advancements in Emerging Semiconductor Materials for Diverse Applications

edited by

Kuldeep Singh Gour

and Jongsung Park

submission deadline 20 Oct 2025 | Viewed by 460 | Submission Open

Keywords: inorganic compound semiconductors; two-dimensional (2D) materials; perovskite semiconductors; photodetectors; photovoltaics; water electrolysis; hybrid materials for energy applications

(This special issue belongs to the Section Electronic Materials)

Processing and Microstructure Design of Advanced Ceramics

edited by

Bo Ren

and Haiyang Chen

submission deadline 20 Oct 2025 | 1 articles | Viewed by 450 | Submission Open

Keywords: ceramics; engineering application; microstructure; mechanical properties; thermal properties

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Magnetic Nanomaterials and Their Biomedical Applications

edited by

Ovidiu Oprea

and

Denisa Ficai

submission deadline 20 Oct 2025 | Viewed by 411 | Submission Open

Keywords: magnetic nanoparticles; functional magnetic materials; magnetic materials in medicine; magnetic separation

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Biopolymers and Their Bioengineering Applications

edited by Glória Maria Vinhas and

Eduardo Padrón Hernández

submission deadline 20 Oct 2025 | Viewed by 354 | Submission Open

Keywords: sustainable polymers; natural polymers; renewable polymers; bio-composite films; biodegradable polymers; biodegradable blends; bioactive films; biotechnological polymers; biopolymers; sustainable materials

(This special issue belongs to the Section Biomaterials)

Processing and Characteristics of Metal Matrix Composites

edited by

Feng Qiu

and Yong Shao

submission deadline 20 Oct 2025 | Viewed by 332 | Submission Open

Keywords: metal matrix composites; material design; microstructural characteristics; performance characterization; microstructure modelling; material processing

(This special issue belongs to the Section Metals and Alloys)

Nanocellulose Containing Biodegradable Products: From Synthesis to Applications

edited by

Katarina Dimić-Mišić

submission deadline 20 Oct 2025 | Viewed by 298 | Submission Open

Keywords: nanocellulose; hydrogels; nanocellulose rheology; dewatering; composites; films; My research is focused on lignocellulose materials and their production with reduced amount of energy; water; and chemicals whilst improving gelation; focusing on fluid flow; dewatering; and flow behavior in dynamic processing conditions. I design novel printing inks and coating methods for cellulose-based substrates and textiles; with altering colloidal interactions between coat and substrate during printing and coating. My knowledge extends to the rheological behavior of biobased hydrogels and mechanical testing for packaging materials; electronics; and medical composites.

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Synthesis, Characterization and Multipurpose Applications of Advanced Functional Materials Used in Life and Materials Science

edited by

Bogdan Stefan Vasile

,

Adrian Ionut Nicoara

and

Otilia Ruxandra Vasile

submission deadline 20 Oct 2025 | Viewed by 277 | Submission Open

Keywords: advanced functional materials; synthesis of unconventional materials; advanced characterization techniques for materials; biomedical applications; materials used for energy production and storage; catalysis and photocatalysis; biocompatible materials; multifunctional composites; new materials and biomaterials

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Additive Manufacturing of Metallic Porous Components in Electrochemical Systems

edited by

Pablo A. García Salaberri

and Julia Ureña Alcázar

submission deadline 20 Oct 2025 | Viewed by 232 | Submission Open

Keywords: additive manufacturing; electrochemical devices; metals; porous media; performance; durability

(This special issue belongs to the Section Manufacturing Processes and Systems)

Influence of Processing Parameters on the Microstructure and Mechanical Properties of Metals

edited by

Ludmila Kučerová

submission deadline 20 Oct 2025 | Viewed by 210 | Submission Open

Keywords: processing parameters; microstructure; mechanical properties; metals

(This special issue belongs to the Section Metals and Alloys)

Emerging 2D Materials for Energy Storage and Conversion Applications

edited by

Bushra Jabar

submission deadline 20 Oct 2025 | Viewed by 209 | Submission Open

Keywords: 2D materials; energy conversion; energy storage; material synthesis; device performance

(This special issue belongs to the Section Energy Materials)

Innovations in Dental Biomaterials: Mechanical Properties and Bonding Challenges

edited by

Ivana Miletić

and Anja Ivica

submission deadline 20 Oct 2025 | Viewed by 200 | Submission Open

Keywords: biointeractive materials; bonding agents; dental materials; dentin adhesion; glass ionomer cements; minimally invasive dentistry; remineralization; restorative dentistry; smart materials

(This special issue belongs to the Section Biomaterials)

Additive Manufacturing for Advanced Thermal Management Systems

edited by

Beata Anwajler

and

Jacek Kasperski

submission deadline 20 Oct 2025 | Viewed by 198 | Submission Open

Keywords: additive manufacturing 3D printing; materials; heat transfer; sustainability; optimization of heat transfer; advanced thermal management systems

(This special issue belongs to the Section Manufacturing Processes and Systems)

Forming and Manufacturing Technology of High-Performance Gears

edited by

Wei Feng

and Xinghui Han

submission deadline 20 Oct 2025 | Viewed by 193 | Submission Open

Keywords: gear materials; gear forging; performance improvement of gears; precision control of gears; heat treatment technology of gears; microstructure evolution; numerical simulation for gear forging

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advanced High-Performance Metals and Alloys: Microstructural Evolution, Mechanical Properties, and Strengthening Mechanisms

edited by

Guobing Wei

and Xi Zhang

submission deadline 20 Oct 2025 | Viewed by 187 | Submission Open

Keywords: advanced metals; high-performance alloys; microstructural evolution; mechanical properties; strengthening mechanisms; alloy design; phase transformation

(This special issue belongs to the Section Metals and Alloys)

Polymer and Gel Materials for Air and Water Remediation via Adsorption and Separation

edited by

Monica Nemtanu

,

Ibrahim M. Alarifi

and

Mirela Braşoveanu

submission deadline 20 Oct 2025 | Viewed by 184 | Submission Open

Keywords: sustainable and green materials; polymer adsorbents; hydrogels and aerogels; hybrid and nanocomposite materials; gas separation and capture; wastewater treatment; volatile organic compound (VOC) removal; heavy metal and microplastic adsorption; adsorption mechanisms; separation technologies

(This special issue belongs to the Section Soft Matter)

Materials Physics in Thermoelectric Materials, Second Edition

edited by

Bao-Tian Wang

and Zhibin Gao

submission deadline 20 Oct 2025 | Viewed by 181 | Submission Open

Keywords: thermoelectrics; electronic transport; thermal transport; thermoelectric transport; band engineering; Seebeck effect; power factor; lattice thermal conductivity; lattice dynamics

(This special issue belongs to the Section Materials Physics)

Advancements in the Nanotribology of Two-Dimensional Layered Materials

edited by

Renato Buzio

and

Enrico Gnecco

submission deadline 20 Oct 2025 | Viewed by 181 | Submission Open

Keywords: atomic force microscopy; friction force microscopy; 2D materials and flakes; layered materials; nanotribology; superlubricity; friction control; manipulation; liquid dispersions

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Advanced Nanomaterials for Photocatalytic Application

edited by Xiaolei Liu

submission deadline 20 Oct 2025 | Viewed by 176 | Submission Open

Keywords: photocatalytic H2 production; photocatalytic CO2 reduction; photocatalytic water splitting; photocatalytic pollutant treatment; photocatalytic organic synthesis; photocatalytic nanomaterial synthesis

(This special issue belongs to the Section Catalytic Materials)

Advances in Microstructure and Properties of Welded–Brazed Joints

edited by

Javier de Prado

and

María Sánchez

submission deadline 20 Oct 2025 | Viewed by 165 | Submission Open

Keywords: joint microstructure; welding– brazing; mechanical properties; filler material

(This special issue belongs to the Section Manufacturing Processes and Systems)

Maxillofacial Prosthetic and Reconstructive Materials (Second Edition)

edited by

Mark W. Beatty

submission deadline 20 Oct 2025 | Viewed by 159 | Submission Open

Keywords: facial prosthetic materials; maxillofacial prosthetic materials; maxillofacial reconstructive materials

(This special issue belongs to the Section Biomaterials)

Selected Papers from the 14th Southern Conference on Computational Mechanics

edited by

Dan Huang

and Zhiyuan Li

submission deadline 20 Oct 2025 | Viewed by 156 | Submission Open

Keywords: computational mechanics; multi-scale modeling; multiphysics modeling; damage and failure; data-driven approaches; industrial software development; high-performance computing; biomechanics and nanomechanics

(This special issue belongs to the Section Materials Simulation and Design)

Interfaces and Thin Layers in Ceramic Composites

edited by

Eligiusz Postek

submission deadline 20 Oct 2025 | Viewed by 147 | Submission Open

Keywords: composite; ceramics; metal matrix composites; interface; statics; dynamics; impact; constitutive models; molecular dynamics; meshless methods; finite element method

(This special issue belongs to the Section Advanced Composites)

Advances in Atomic Layer Deposition Process, Applications and Modeling

edited by Xiaopeng Cheng

submission deadline 20 Oct 2025 | Viewed by 128 | Submission Open

Keywords: atomic layer deposition; functional materials; metals; next-generation batteries; electron microscopy characterization

(This special issue belongs to the Section Thin Films and Interfaces)

Advances in Polymer Blends and Composites—Second Edition

edited by

Eduard-Marius Lungulescu

and

Radu Setnescu

submission deadline 20 Oct 2025 | Viewed by 127 | Submission Open

Keywords: polymer blends and composites; renewable sources of polymers; biocomposites; processing; characterization and testing; waste management; lifetime cycle

(This special issue belongs to the Section Advanced Composites)

Advanced Materials: Process, Properties, and Applications—Second Edition

edited by

Pradeep Menezes

submission deadline 20 Oct 2025 | Viewed by 123 | Submission Open

Keywords: cermet; high-entropy alloys; functional-grade materials; advanced high-strength steels; nanomaterials and nanocomposites; self-lubricating materials; MAX phase materials— MXenes; additive manufacturing; microstructural characterization; mechanical properties; computational modeling and simulations

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advanced Materials and Their Sensing Applications in Intelligent Transportation Infrastructure

edited by Xinxiang Zhang,

Feng Guo

, Honglei Chang and Chen Wei

submission deadline 20 Oct 2025 | Viewed by 117 | Submission Open

Keywords: sustainable materials; advanced materials; non-destructive evaluation; structural health monitoring; life-cycle assessment

(This special issue belongs to the Section Smart Materials)

Developments in Superconductor Materials: Structure, Properties, and Applications

edited by

Chi Ho Wong

submission deadline 20 Oct 2025 | Viewed by 116 | Submission Open

Keywords: iron-based superconductors; superconducting nanowires; spin and charge density waves; high-field superconducting magnets; majorana zero modes

(This special issue belongs to the Section Quantum Materials)

Νanoparticles for Biomedical Applications (2nd Edition)

edited by

Leto-Aikaterini Tziveleka

and

Zili Sideratou

submission deadline 20 Oct 2025 | Viewed by 116 | Submission Open

Keywords: nanoparticles; lipid-based; carbon-based; polymeric; inorganic; functionalization; controlled delivery; bioimaging; theranostics; tissue engineering

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Oral Tissue Engineering, Tissue Modelization, and Materials Thereof

edited by

Stéphane Durual

and

Laurine Marger

submission deadline 20 Oct 2025 | Viewed by 104 | Submission Open

Keywords: bone and soft tissue engineering; biomaterials and scaffolds; organoids; 3D-cultures; modelization; stem cells

(This special issue belongs to the Section Biomaterials)

Bioinspired Micro/Nanomaterials and Devices for Biomedical Applications

edited by Fangyu Zhang, Yaou Duan and

Songsong Tang

submission deadline 20 Oct 2025 | Viewed by 102 | Submission Open

Keywords: drug delivery; micro/nanomaterials; micro/nanorobots; bioinspired systems; theranostics; hydrogel; wearable device

(This special issue belongs to the Section Biomaterials)

Metals and Alloys Manufactured by Powder Metallurgy Methods

edited by Alireza Jam

submission deadline 20 Oct 2025 | Viewed by 94 | Submission Open

Keywords: powder metallurgy (PM); material properties; complex geometries; high-density components; additive manufacturing; alloy systems; particle size distribution; porosity control

(This special issue belongs to the Section Metals and Alloys)

Material Advances and Challenges in Pulse Power System

edited by

Zhigang Liu

submission deadline 20 Oct 2025 | Viewed by 91 | Submission Open

Keywords: metal ablation; insulator degradation; energy storage dielectrics; pulse capacitors; spark switch; pulse power; plasma

(This special issue belongs to the Section Electronic Materials)

Advanced Materials for Electrical Engineering: Fabrication, Testing and Applications

edited by Minxia Shi and

Xutao Han

submission deadline 20 Oct 2025 | Viewed by 82 | Submission Open

Keywords: piezoelectric ceramics; insulating paper; insulating oil; ferromagnetic materials; material performance testing

(This special issue belongs to the Section Electronic Materials)

Artificial Intelligence in Materials Science and Engineering

edited by

,

,

,

and

submission deadline 30 Oct 2025 | 18 articles | Viewed by 25722 | Submission Open

Keywords: artificial intelligence; artificial neural network; fuzzy system; population-based algorithm; genetic algorithms; bioengineering; metal forming; civil engineering; composite structures; friction stir welding; numerical simulation

(This special issue belongs to the Section Materials Simulation and Design)

Modeling and Mechanical Analysis of Materials and Structures in Civil Engineering

edited by

Peng Wu

and Aiguo Zhao

submission deadline 30 Oct 2025 | Viewed by 297 | Submission Open

Keywords: engineering structures; composite structures; metamaterials; functionally graded materials; multi-field coupling; fatigue and fracture; analytical solutions; optimization design

(This special issue belongs to the Section Construction and Building Materials)

Mechanical Behavior of Composite Materials (3rd Edition)

edited by

Jaime Viña

submission deadline 31 Oct 2025 | 9 articles | Viewed by 13571 | Submission Open

Keywords: fracture; fatigue: creep; tensile; compression; adhesives joints; 3D composites; mechanical tests; mechanical properties

(This special issue belongs to the Section Advanced Composites)

Advanced Nanoporous and Mesoporous Materials

edited by

Jakub Mokrzycki

, Monika Fedyna and

Wen-Tien Tsai

submission deadline 31 Oct 2025 | 7 articles | Viewed by 12480 | Submission Open

Keywords: zeolite; MOFs; COFs; ordered materials; carbonaceous materials; adsorption; catalysis; energy

(This special issue belongs to the Section Porous Materials)

Plastic Deformation, Strengthening and Toughening of Advanced Metallic Materials (2nd Edition)

edited by

Fulin Jiang

submission deadline 31 Oct 2025 | 9 articles | Viewed by 11246 | Submission Open

Keywords: metallic materials; plastic deformation; mechanical properties; microstructure; advance processing; modelling; simulation

(This special issue belongs to the Section Metals and Alloys)

Multi-Scale Bionic Materials: Interfacial Design, Effective Fabrication and Functional Application

edited by

Haoqi Yang

, Xiaolin Liu and Yunyun Song

submission deadline 31 Oct 2025 | 13 articles | Viewed by 11015 | Submission Open

Keywords: bionic functional materials; bionic fabrication; biomaterials; interfacial design; antibacterial materials; bio-inspired actuator; radiative cooling; oil– water separation; energy conversion; anti-icing surface design

(This special issue belongs to the Section Smart Materials)

Advances in Ultra-High Performance Concretes and Cementitious Composites

edited by

Baoguo Han

and

Jialiang Wang

submission deadline 31 Oct 2025 | 5 articles | Viewed by 5705 | Submission Open

Keywords: ultra-high performance concretes (UHPC); cementitious composites; durability; sustainability; numerical modeling; mechanical properties; long-term performance

(This special issue belongs to the Section Construction and Building Materials)

Advanced Superconducting Materials and Technology

edited by

Tomasz Czujko

and

Daniel Gajda

submission deadline 31 Oct 2025 | 4 articles | Viewed by 2281 | Submission Open

Keywords: superconducting materials; MgB2; iron-based superconductors; high Tc Superconductors; synthesis and characterization; application of superconductors

(This special issue belongs to the Section Quantum Materials)

Surface Modification of Materials for Multifunctional Applications

edited by Ming Gao and Wei Jia

submission deadline 31 Oct 2025 | 2 articles | Viewed by 1804 | Submission Open

Keywords: surface modification; materials; coating; thin-film; chemical treatment; electrochemical treatment; plasma treatment; nanotechnology; functionalization

(This special issue belongs to the Section Thin Films and Interfaces)

3D-Printed Oxide Ceramics: Design, Mechanism and Applications

edited by He Li

submission deadline 31 Oct 2025 | Viewed by 154 | Submission Open

Keywords: multi-material collaboration; regenerative printing technique; machine learning; adaptive ceramic paste development; multi-scale pore structure design

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Orthodontic Materials: Properties and Effectiveness of Use

edited by Matthias Mertmann and Andrea Wichelhaus

submission deadline 10 Nov 2025 | 8 articles | Viewed by 11932 | Submission Open

Keywords: orthodontics; metals; mechanical properties; simulation; brackets; aligner; treatment system; sustainability; environmental effects; retention; surface structure; adhesion; polymers; clinical studies; 3D printing; laser sintering; CAD– CAM retainer

(This special issue belongs to the Section Biomaterials)

Liquid Structures and Solidification Processes of Metals

edited by Xuelei Tian, Hui Li and

Xiaohang Lin

submission deadline 10 Nov 2025 | 5 articles | Viewed by 6884 | Submission Open

Keywords: physical models; theoretical and experimental methods; liquid structures under thermodynamics equilibrium; structural evolution; solidification processes including the relationship between the structures/processes of melts and structure/performance of solid state

(This special issue belongs to the Section Metals and Alloys)

Two-Dimensional Semiconductors—Advancements in Material Growth and Characterization

edited by

Sakineh Chabi

submission deadline 10 Nov 2025 | 1 articles | Viewed by 727 | Submission Open

Keywords: nano-semiconductors; 2D materials; 2D/3D heterostructures; CVD growth; epitaxial growth; nanosheets

(This special issue belongs to the Section Electronic Materials)

Recent Advances in Environmentally Friendly Recycling Technology for Metals (2nd Edition)

edited by

Tiejun Chun

and

Jian Pan

submission deadline 10 Nov 2025 | Viewed by 440 | Submission Open

Keywords: solid wastes; copper slag; red mud; steel slag; Zn-bearing dust; valuable metals; environmental pollutions

(This special issue belongs to the Section Metals and Alloys)

Chemistry and Technology of Materials Based on Silicon Compounds (2nd Edition)

edited by

Karol Szubert

submission deadline 10 Nov 2025 | Viewed by 249 | Submission Open

Keywords: silicon-based materials; silanes; polysiloxanes; silicates; polymeric materials; ceramic materials; protective coatings; coatings— surface chemistry and properties; materials characterization; applications

(This special issue belongs to the Section Materials Chemistry)

Modern Wood-Based Materials for Sustainable Building

edited by

Dorota Dukarska

and

Jakub Kawalerczyk

submission deadline 20 Nov 2025 | 11 articles | Viewed by 12934 | Submission Open

Keywords: wood and wood-based materials as a sustainable building resource; construction and insulating wood-based materials; composite materials in modern wood construction; green composites; biomass in the manufacture of insulation materials; the role of wood and wood-based materials in reducing carbon emissions; joining techniques for wood and wood-based materials; eco-friendly adhesives; the environmental engineering of eco-friendly materials; the protection of wood and wood-based materials from biotic and abiotic factors; energy-efficient construction solutions based on wood and wood-based materials; a healthy indoor environment in wooden buildings; innovative technologies for the prefabrication of building construction elements; evaluation criteria for sustainable building materials; fire safety in wooden buildings; the durability of wooden buildings in the long term.

(This special issue belongs to the Section Green Materials)

Structural Design and Mechanical Properties of Fiber Composites (Second Edition)

edited by

Yanxiang Wang

and Yujun Bai

submission deadline 20 Nov 2025 | 7 articles | Viewed by 9198 | Submission Open

Keywords: carbon fiber; laminated; fibers; textiles; polymer composites

(This special issue belongs to the Section Advanced Composites)

Processing, Characterization and Applications of Ceramic Matrix Composites

edited by

Rodrigo Moreno

and

Oscar Rubem Klegues Montedo

submission deadline 20 Nov 2025 | 11 articles | Viewed by 9114 | Submission Open

Keywords: ceramic– matrix composites; fibers; processing; ceramics; coatings; laminates; structural applications; thermal barrier coatings

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

New Trends in Mechanical and Tribological Properties of Materials and Components

edited by

Andrea Mura

, Luigi Mazza and Edoardo Goti

submission deadline 20 Nov 2025 | 10 articles | Viewed by 8224 | Submission Open

Keywords: fatigue; tribology; material characterization; design methods; testing

(This special issue belongs to the Section Mechanics of Materials)

State-of-the-Art Construction Materials and Technologies for Structural Health Monitoring of Infrastructures

edited by

Byeong Hun Woo

and Hong Gi Kim

submission deadline 20 Nov 2025 | 5 articles | Viewed by 7659 | Submission Open

Keywords: smart construction materials; self-sensing cement composites; thermal properties of the cement composites; smart snow-melting systems; rebar corrosion monitoring; durability analysis; machine learning; advanced statistical approaches

(This special issue belongs to the Section Construction and Building Materials)

Advances in Friction, Wear-Resistant and Solid-Lubricating Properties of Materials

edited by Xiangli Wen, Bin Wang and

Yanfei Liu

submission deadline 20 Nov 2025 | 6 articles | Viewed by 6612 | Submission Open

Keywords: tribology; wear; lubrication; solid lubrication; wear rate

(This special issue belongs to the Section Mechanics of Materials)

Advances in Sustainable Construction and Building Materials (3rd Edition)

edited by

Ru Ji

and

Fanghui Han

submission deadline 20 Nov 2025 | 9 articles | Viewed by 6573 | Submission Open

Keywords: construction and building materials; sustainable development; energy saving; energy efficiency; waste utilization; synthesis and preparation; characterization and properties; application

(This special issue belongs to the Section Construction and Building Materials)

New Advances in Elastomer Materials and Its Composites

edited by

Magdalena Maciejewska

submission deadline 20 Nov 2025 | 5 articles | Viewed by 6475 | Submission Open

Keywords: elastomer composites; vulcanization; devulcanization; fillers; anti-aging agents; mechanical performance; thermal properties; biodegradability; self-healing properties; electrical properties.

(This special issue belongs to the Section Polymeric Materials)

Advanced Materials, Machinability and Intelligent Manufacturing Systems

edited by

,

,

, Suthep Butdee,

and Kamil Krot

submission deadline 20 Nov 2025 | 5 articles | Viewed by 6463 | Submission Open

Keywords: composites; aerospace materials; high-entropy alloys; hydrogen storage; cutting tools; machinability; production management; intelligent manufacturing

(This special issue belongs to the Section Manufacturing Processes and Systems)

Journal Menu

Journal Browser

Special Issues

Further Information

Guidelines

MDPI Initiatives

Follow MDPI