Announcements

The primary focus of the “Bioelectronics” Section are topics that seek to utilize electronic knowledge and execution in the field of biology and medicine for health wellness with research efforts that cross disciplines, such as chemistry, life science, physics, electrical engineering, and materials science. Bioelectronic research works in a wide context, encompassing, for example, biosensors, bionics and biomaterials, DNA chips, lab-on-a-chip, innovative devices or advanced signal processes for the prevention, diagnosis, and treatment of physical and mental diseases, robotic devices for patient rehabilitation, bioelectromagnetics, artificial intelligence for improving health, conductive polymers, organic semiconductors, carbon nanotubes, graphene, wearable electronics, and implantable electronics, just to cite a few.

As they are published in an open access format, you have free and unlimited access to the full text of all the articles in our journal. We welcome you to read our most highly cited papers published in 2021:

1. “CNN Variants for Computer Vision: History, Architecture, Application, Challenges and Future Scope”
by Dulari Bhatt et al.
Electronics 2021, 10(20), 2470; https://doi.org/10.3390/electronics10202470
Available online: https://www.mdpi.com/2079-9292/10/20/2470

2. “Automated Workers’ Ergonomic Risk Assessment in Manual Material Handling Using sEMG Wearable Sensors and Machine Learning”
by Srimantha E. Mudiyanselage et al.
Electronics 2021, 10(20), 2558; https://doi.org/10.3390/electronics10202558
Available online: https://www.mdpi.com/2079-9292/10/20/2558

3. “State-of-the-Art Optical Devices for Biomedical Sensing Applications—A Review”
by N. L. Kazanskiy et al.
Electronics 2021, 10(8), 973; https://doi.org/10.3390/electronics10080973
Available online: https://www.mdpi.com/2079-9292/10/8/973

4. “Multiclass ECG Signal Analysis Using Global Average-Based 2-D Convolutional Neural Network Modeling”
by Muhammad Wasimuddin et al.
Electronics 2021, 10(2), 170; https://doi.org/10.3390/electronics10020170
Available online: https://www.mdpi.com/2079-9292/10/2/170

5. “Integration and Applications of Fog Computing and Cloud Computing Based on the Internet of Things for Provision of Healthcare Services at Home”
by Muhammad Ijaz et al.
Electronics 2021, 10(9), 1077; https://doi.org/10.3390/electronics10091077
Available online: https://www.mdpi.com/2079-9292/10/9/1077

6. “An Overview of Wearable Piezoresistive and Inertial Sensors for Respiration Rate Monitoring”
by Roberto De Fazio et al.
Electronics 2021, 10(17), 2178; https://doi.org/10.3390/electronics10172178
Available online: https://www.mdpi.com/2079-9292/10/17/2178

7. “Generating Synthetic ECGs Using GANs for Anonymizing Healthcare Data”
by Esteban Piacentino et al.
Electronics 2021, 10(4), 389; https://doi.org/10.3390/electronics10040389
Available online: https://www.mdpi.com/2079-9292/10/4/389

8. “Deep Learning Methods for Classification of Certain Abnormalities in Echocardiography”
by Imayanmosha Wahlang et al.
Electronics 2021, 10(4), 495; https://doi.org/10.3390/electronics10040495
Available online: https://www.mdpi.com/2079-9292/10/4/495

9. “Bone Metastasis Detection in the Chest and Pelvis from a Whole-Body Bone Scan Using Deep Learning and a Small Dataset”
by Da-Chuan Cheng et al.
Electronics 2021, 10(10), 1201; https://doi.org/10.3390/electronics10101201
Available online: https://www.mdpi.com/2079-9292/10/10/1201

10. “GaborPDNet: Gabor Transformation and Deep Neural Network for Parkinson’s Disease Detection Using EEG Signals”
by Hui Wen Loh et al.
Electronics 2021, 10(14), 1740; https://doi.org/10.3390/electronics10141740
Available online: https://www.mdpi.com/2079-9292/10/14/1740

The Section “Artificial Intelligence” mainly covers topics of interest within unique hardware-based deep learning AI and algorithmic deep learning AI using machine learning. The purpose of this Section is to bring together researchers and engineers, from both academia and industry, to present novel ideas and solid research on the hardware and algorithmic aspects of advanced applications of deep-learning-based AI.

As they are published in an open access format, you have free and unlimited access to the full text of all of the articles published in our journal. We welcome you to read our most highly cited papers published in 2021 below:

1. “Biometric User Identification Based on Human Activity Recognition Using Wearable Sensors: An Experiment Using Deep Learning Models”
by Sakorn Mekruksavanich and Anuchit Jitpattanakul
Electronics 2021, 10(3), 308; https://doi.org/10.3390/electronics10030308
Available online: https://www.mdpi.com/2079-9292/10/3/308

2. “Novel Control Strategy for Enhancing Microgrid Operation Connected to Photovoltaic Generation and Energy Storage Systems”
by Dina Emara et al.
Electronics 2021, 10(11), 1261; https://doi.org/10.3390/electronics10111261
Available online: https://www.mdpi.com/2079-9292/10/11/1261

3. “Deep Convolutional Neural Network with RNNs for Complex Activity Recognition Using Wrist-Worn Wearable Sensor Data”
by Sakorn Mekruksavanich and Anuchit Jitpattanakul
Electronics 2021, 10(14), 1685; https://doi.org/10.3390/electronics10141685
Available online: https://www.mdpi.com/2079-9292/10/14/1685

4. “Artificial Neural Networks Based Optimization Techniques: A Review”
by Maher G. M. Abdolrasol et al.
Electronics 2021, 10(21), 2689; https://doi.org/10.3390/electronics10212689
Available online: https://www.mdpi.com/2079-9292/10/21/2689

5. “An Advanced CNN-LSTM Model for Cryptocurrency Forecasting”
by Ioannis E. Livieris et al.
Electronics 2021, 10(3), 287; https://doi.org/10.3390/electronics10030287
Available online: https://www.mdpi.com/2079-9292/10/3/287

6. “A Fuzzy Logic Model for Hourly Electrical Power Demand Modeling”
by Marco Antonio Islas et al.
Electronics 2021, 10(4), 448; https://doi.org/10.3390/electronics10040448
Available online: https://www.mdpi.com/2079-9292/10/4/448 

7. “A Survey on Machine Learning-Based Performance Improvement of Wireless Networks: PHY, MAC and Network Layer”
by Merima Kulin et al.
Electronics 2021, 10(3), 318; https://doi.org/10.3390/electronics10030318
Available online: https://www.mdpi.com/2079-9292/10/3/318

8. “Improved YOLOv3 Network for Insulator Detection in Aerial Images with Diverse Background Interference”
by Chuanyang Liu et al.
Electronics 2021, 10(7), 771; https://doi.org/10.3390/electronics10070771
Available online: https://www.mdpi.com/2079-9292/10/7/771

9. “Concrete Cracks Detection and Monitoring Using Deep Learning-Based Multiresolution Analysis”
by Ahcene Arbaoui et al.
Electronics 2021, 10(15), 1772; https://doi.org/10.3390/electronics10151772
Available online: https://www.mdpi.com/2079-9292/10/15/1772

10. “EWOA-OPF: Effective Whale Optimization Algorithm to Solve Optimal Power Flow Problem”
by Mohammad H. Nadimi-Shahraki et al.
Electronics 2021, 10(23), 2975; https://doi.org/10.3390/electronics10232975
Available online: https://www.mdpi.com/2079-9292/10/23/2975

Electronics (ISSN 2079-9292) is an international, peer-reviewed, and open access journal on the science of electronics and its applications. It publishes reviews, research articles, short communications, and letters. Our aim is to encourage scientists to publish their experimental and theoretical results in as much detail as possible. There is no restriction on the length of the papers.

The Electronics editorial team is pleased to announce this open call for Special Issue proposals, which gives a group of authors the opportunity to work on an interconnected set of papers on an innovative topic. We would like to solicit high-quality proposals, which will be evaluated by a competitive procedure on a rolling basis throughout the year.

Proposals within the scope of the journal are welcome. For more details, please see the following link: https://www.mdpi.com/journal/electronics/about.

If you would like to propose a Special Issue topic for this journal, please click on the following link and complete and submit the form: https://www.mdpi.com/journalproposal/sendproposalspecialissue/electronics. Our editors will get back to you shortly.

The duties and benefits of acting as a Guest Editor are as follows:

• Publishing both a review paper and a research paper free of charge in the Special Issue, in addition to a potential discount for additional papers that you invite;
• Redefining the title and scope of the Special Issue;
• Circulating the call for papers for the Special Issue and inviting submissions;
• Making decisions on whether a manuscript can be accepted based on the reports that we collect;
• Promoting the Special Issue and increasing its visibility at related academic conferences;
• If ten or more papers are published in the Special Issue, we can make a Special Issue book and send a hard copy to each Guest Editor.

The Editorial Office will take care of setting up the Special Issue website, arrange the promotional materials, assist with invitations to contribute papers, and take care of the rest of the administrative tasks associated with peer review, including inviting reviewers, collating reports, contacting authors, and professional production before publication.

Please do not hesitate to contact the Editorial Office (electronics@mdpi.com) for further details and clarification.

We look forward to receiving your proposals.

Electronics Editorial Office

The Seventh International Conference on Data Mining and Big Data (DMBD'2022) is an international forum allowing researchers and practitioners to exchange the latest theories, algorithms, models, and applications of data mining and big data, as well as artificial intelligence techniques. Data mining refers to examining big data sets to look for relevant or pertinent information. Big data contains huge amounts of data and information and is worthy of in-depth research.

DMBD'2022 is the seventh event, following the Guangzhou, Belgrade, Chiang Mai, Shanghai, Fukuoka and Bali events, at which hundreds of delegates from all over the world gathered to share their latest achievements, innovative ideas, and marvelous designs and their implementations.

This year's main theme is FinTech, and we will pay particular attention to technologies and applications in this area. We will also hold a quantitative trading competition.

The main topics of the conference are as follows:

• Quantitative investment;
• Market microstructure;
• Fraud detection;
• Risk prediction;
• Credit modeling;
• Individual financing;
• Financial theories;
• Financial activities modeling;
• Financial intelligent system.

• Machine learning;
• Statistical learning;
• Supervised learning;
• Unsupervised, self-supervised learning;
• Few-shot learning;
• Transfer learning;
• Reinforcement learning;
• Meta learning;
• Systems for data mining;
• Mining text, semi-structured, spatiotemporal, streaming, graph, web, multimedia data;
• Personalization and recommendation systems;
• Case-based reasoning;
• Similarity-based reasoning.

• Data models and architectures;
• Security, privacy, and trust;
• Data protection and integrity;
• Identity theft, data loss and leakage;
• Legal and ethical issues;
• Data analytics and metrics;
• Data representation and structures;
• Data management and processing;
• Data capturing and acquisition;
• Tools and technologies QoS in big data.

• Social networks analysis;
• Data searching and mining;
• Visualization of data;
• Personal data logging and quantified self;
• Context-aware data;
• Data economics;
• Applications of data mining and big data;
• Methodologies and use cases;
• Usability issues;
• Storages and network requirements;
• Network models and protocols;
• Big data in cloud and IoT;
• Techniques for big data processing.

The 9th International Symposium on Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications (MAPE 2022) will be held from 26 to 29 August 2022, in Chengdu, China. MAPE 2022 is sponsored by the University of Electronic Science and Technology of China and Beijing Jiaotong University and is technically supported by the IEEE Antennas and Propagation Society. MAPE was initiated to celebrate the 20th anniversary of the foundation of IEEE Beijing Section in 2005. After several years, it has become the flagship wireless event of the IEEE Beijing Section, geared toward wireless communication industry professionals interested in the latest research and design.

This symposium will provide a multi-discipline forum allowing researchers and technologists in the fields of microwave, antenna, propagation, and EMC technologies to present new ideas and contributions in the form of technical papers and panel discussions on applications in the ever-growing area of wireless communications, such as 6G, NB-IoT, and LoRa.

Scope:

The topics of the symposium will cover all aspects of the theory and techniques of microwaves, antennas, propagation, and EMC necessary for wireless communications. Potential topics include, but are not limited to, the following:

1. Systems and Services:

• Mobile Satellite Communication;
• WLANs;
• Wireless Sensors and Ad Hoc Networks;
• MIMO Technologies;
• UWB and Impulse Radio;
• Space—Time Channel Characterization and Modeling;
• Terahertz Imaging and Sources;
• Cyber Electromagnetics;
• Internet of Things;
• High-Power Microwave Systems.

2. Microwave Electronics:

• Passive and Active Circuits;
• Power Amplifiers, Linearization, and Active Components;
• MMICs and Microwave Circuits;
• Microwave and Millimeter Wave ICs;
• Millimeter Wave and Sub-Millmeter Wave Components;
• Circuits and Systems.

3. Antennas:

• Microstrip and Printed Antennas;
• Active and Integrated Antennas;
• Array Antennas, Phased Arrays, and Feeding Circuits;
• Mobile and Base Station Antennas;
• Adaptive and Smart Antennas;
• Ultra-Wideband, Broadband, and Multi-band Antennas;
• Reconfigurable Antennas and Arrays;
• Millimeter Wave and Sub-Millimeter Wave Antennas;
• MEMS/Nanotechnology for Antennas.

4. Propagation:

• Mobile and Indoor Propagation;
• Millimeter and Optical Wave Propagation;
• Earth-Space and Terrestrial Propagation;
• Ionospheric Propagation;
• Propagation and Channel Characterization;
• Diversity Techniques and Fading Countermeasures;
• Signal Separation and Interference Rejection;
• Random Media and Rough Surfaces.

5. Electromagnetics:

• Electromagnetic Theory;
• Complex Media and Artificial Media;
• Computational Electromagnetics;
• Biomedical Application of Electromagnetic Waves;
• EM-Plasma Interaction;
• Space–Time Modulated Electromagnetics.

6. EMC Technologies:

• EMC Sources: Electromagnetic Environment, Lightning, Intentional EMI and EMP, High Power Electromagnetics, ESD, and UWB;
• EMC of Components and Integrated Circuits, PCB, Electronic Packaging and Integration;
• EMC in Power Systems and Power Quality;
• System Level EMC;
• EMC in Power Electronics;
• EMC in Smart Grids;
• EMC in Internet of Things;
• EMC in Communications: Wired and Wireless Communications, 6G, UWB, and Power Line Communications;
• EMC Standards, Management, and Regulations;
• EMC in Aerospace.

For further information, please refer to the conference website, or contact us via contact@ieee-mape.org.

The purpose of our Best Paper Awards is to promote and recognize the most impactful contributions published within MDPI journals.

The academic editors of each journal carefully selected reviews and research papers through a rigorous judging process based on criteria such as the scientific merit, overall impact, and the quality of presentation of the papers published in the journal.

We are honored to present the winners in the “Engineering” category, who were selected amongst extensive competition, and congratulate the authors for their outstanding scientific publications.

Actuators:

• “Position Control of Pneumatic Actuators Using Three-Mode Discrete-Valued Model Predictive Control”
  by Haitao Qi, Gary M. Bone and Yile Zhang
  Actuators 2019, 8(3), 56; doi: 10.3390/act8030056
• “Review of Electrothermal Actuators and Applications”
  by Alissa Potekhina and Changhai Wang
  Actuators 2019, 8(4), 69; doi: 10.3390/act8040069

Batteries:

• “Pre-Lithiation Strategies for Rechargeable Energy Storage Technologies: Concepts, Promises and Challenges”
  by Florian Holtstiege, Peer Bärmann, Roman Nölle, Martin Winter and Tobias Placke
  Batteries 2018, 4(1), 4; doi: 10.3390/batteries4010004
• “A Critical Review of Lithium-Ion Battery Recycling Processes from a Circular Economy Perspective”
  by Omar Velázquez-Martínez, Johanna Valio, Annukka Santasalo-Aarnio, Markus Reuter and Rodrigo Serna-Guerrero
  Batteries 2019, 5(4), 68; doi: 10.3390/batteries5040068
• “Critical Review of the Use of Reference Electrodes in Li-Ion Batteries: A Diagnostic Perspective”
  by Rinaldo Raccichini, Marco Amores and Gareth Hinds
  Batteries 2019, 5(1), 12; doi: 10.3390/batteries5010012
• “Life Cycle Analysis of Lithium-Ion Batteries for Automotive Applications”
  by Qiang Dai, Jarod C. Kelly, Linda Gaines and Michael Wang
  Batteries 2019, 5(2), 48; doi 10.3390/batteries5020048
• “Design Strategies for High Power vs. High Energy Lithium Ion Cells”
  by Michael J. Lain, James Brandon and Emma Kendrick
  Batteries 2019, 5(4), 64; doi: 10.3390/batteries5040064

Chemosensors:

• “Influence of Humidity on NO₂-Sensing and Selectivity of Spray-CVD Grown ZnO Thin Film above 400 °C”
  by Roussin Lontio Fomekong and Bilge Saruhan
  Chemosensors 2019, 7(3), 42; doi: 10.3390/chemosensors7030042
• “Low Molecular Weight Fluorescent Probes (LMFPs) to Detect the Group 12 Metal Triad”
  by Ashley D. Johnson, Rose M. Curtis and Karl J. Wallace
  Chemosensors 2019, 7(2), 22; doi: 10.3390/chemosensors7020022

Journal of Marine Science and Engineering:

• “Marine Application of Fiber Reinforced Composites: A Review”
  by Felice Rubino, Antonio Nisticò, Fausto Tucci and Pierpaolo Carlone
  Mar. Sci. Eng. 2020, 8(1), 26; doi: 10.3390/jmse8010026
• “Numerical Simulation of Large Wave Heights from Super Typhoon Nepartak (2016) in the Eastern Waters of Taiwan”
  by Shih-Chun Hsiao, Hongey Chen, Han-Lun Wu, Wei-Bo Chen, Chih-Hsin Chang, Wen-Dar Guo, Yung-Ming Chen and Lee-Yaw Lin
  Mar. Sci. Eng. 2020, 8(3), 217; doi: 10.3390/jmse8030217
• “Development of Deterministic Artificial Intelligence for Unmanned Underwater Vehicles (UUV)”
  by Timothy Sands
  Mar. Sci. Eng. 2020, 8(8), 578; doi: 10.3390/jmse8080578

Lubricants:

• “Solid Lubrication with MoS₂: A Review”
  by Mohammad R. Vazirisereshk, Ashlie Martini, David A. Strubbe and Mehmet Z. Baykara
  Lubricants 2019, 7(7), 57; doi:10.3390/lubricants7070057
• “Investigations of the Friction Losses of Different Engine Concepts. Part 1: A Combined Approach for Applying Subassembly-Resolved Friction Loss Analysis on a Modern Passenger-Car Diesel Engine”
  by Christoph Knauder, Hannes Allmaier, David E. Sander and Theodor Sams
  Lubricants 2019, 7(5), 39; doi: 10.3390/lubricants7050039
• “A Discussion on Present Theories of Rubber Friction, with Particular Reference to Different Possible Choices of Arbitrary Roughness Cutoff Parameters”
  by Andrea Genovese, Flavio Farroni, Antonio Papangelo and Michele Ciavarella
  Lubricants 2019, 7(10), 85; doi: 10.3390/lubricants7100085

Micromachines:

• “4D Printing of Multi-Hydrogels Using Direct Ink Writing in a Supporting Viscous Liquid”
  by Takuya Uchida and Hiroaki Onoe
  Micromachines 2019, 10(7), 433; doi: 10.3390/mi10070433
• “Enhanced Photocatalytic Performance and Mechanism of Au@CaTiO₃ Composites with Au Nanoparticles Assembled on CaTiO₃ Nanocuboids”
  by Yuxiang Yan, Hua Yang, Zao Yi, Ruishan Li and Xiangxian Wang
  Micromachines 2019, 10(4), 254; doi: 10.3390/mi10040254
• “Three-Dimensionally Structured Flexible Fog Harvesting Surfaces Inspired by Namib Desert Beetles”
  by Jun Kyu Park and Seok Kim
  Micromachines 2019, 10(3), 201; doi: 10.3390/mi10030201

Processes:

• “Accelerating Biologics Manufacturing by Modeling or: Is Approval under the QbD and PAT Approaches Demanded by Authorities Acceptable without a Digital-Twin?”
  by Steffen Zobel-Roos, Axel Schmidt, Fabian Mestmäcker, Mourad Mouellef, Maximilian Huter, Lukas Uhlenbrock, Martin Kornecki, Lara Lohmann, Reinhard Ditz and Jochen Strube
  Processes 2019, 7(2), 94; doi: 10.3390/pr7020094
• “Multiscale Agent-Based and Hybrid Modeling of the Tumor Immune Microenvironment”
  by Kerri-Ann Norton, Chang Gong, Samira Jamalian and Aleksander S. Popel
  Processes 2019, 7(1), 37; doi: 10.3390/pr7010037
• “Dynamic Flowsheet Model Development and Sensitivity Analysis of a Continuous Pharmaceutical Tablet Manufacturing Process Using the Wet Granulation Route”
  by Nirupaplava Metta, Michael Ghijs, Elisabeth Schäfer, Ashish Kumar, Philippe Cappuyns, Ivo Van Assche, Ravendra Singh, Rohit Ramachandran, Thomas De Beer, Marianthi Ierapetritou and Ingmar Nopens
  Processes 2019, 7(4), 234; doi: 10.3390/pr7040234

Sensors:

• “A Decentralized Privacy-Preserving Healthcare Blockchain for IoT”
  by Ashutosh Dhar Dwivedi, Gautam Srivastava, Shalini Dhar and Rajani Singh
  Sensors 2019, 19(2), 326; doi: 10.3390/s19020326
• “The Progress of Glucose Monitoring—A Review of Invasive to Minimally and Non-Invasive Techniques, Devices and Sensors”
  by Wilbert Villena Gonzales, Ahmed Toaha Mobashsher and Amin Abbosh
  Sensors 2019, 19(4), 800; doi: 10.3390/s19040800
• “Contact-Based Methods for Measuring Respiratory Rate”
  by Carlo Massaroni, Andrea Nicolò, Daniela Lo Presti, Massimo Sacchetti, Sergio Silvestri and Emiliano Schena
  Sensors 2019, 19(4), 908; doi: 10.3390/s19040908

World Electric Vehicle Journal:

• “Dynamic Wireless Power Transfer Charging Infrastructure for Future EVs: From Experimental Track to Real Circulated Roads Demonstrations”
  by Stéphane Laporte, Gérard Coquery, Virginie Deniau, Alexandre De Bernardinis and Nicolas Hautière
  World Electr. Veh. J. 2019, 10(4), 84; doi: 10.3390/wevj10040084

MDPI’s Young Investigator Awards recognize promising junior researchers, acknowledge their contributions, and enhance communication among scientists. We are proud to present the winners for the year 2021 in the “Engineering” category. The winners were selected by the journals’ editors.

We warmly congratulate the awarded Young Investigators for their outstanding contributions. MDPI will continue to provide support and recognition to the academic community.

Biosensors:

• Amay J. Bandodkar, North Carolina State University, USA.

ChemEngineering:

• Andrew S. Paluch, Miami University, USA.

Chemosensors:

• Mindy Levine, Ariel University, Israel.

Electronics:

• Amir H. Gandomi, University of Technology Sydney, Australia.

Journal of Marine Science and Engineering:

• Tiago Fazeres-Ferradosa, University of Porto, Portugal.

Machines:

• Chen Lv, Nanyang Technological University (NTU), Singapore;
• Ignacio Gonzalez-Prieto, University of Malaga (UMA), Spain;
• Ning Sun, Nankai University, China.

Processes:

• Anton Rassõlkin, Tallinn University of Technology, Estonia.

Sensors:

• Qammer H. Abbasi, Queen Mary University of London, UK;
• Chi Hwan Lee, Purdue University, USA.

We are proud to recognize the winners of MDPI’s 2021 Travel Awards in the “Engineering” category for their outstanding presentations and to present them with the prize.

MDPI journals regularly offer travel awards to encourage talented junior scientists to present their latest research at academic conferences in specific fields, which helps to increase their influence.

The winners mentioned below were carefully selected by the journal editors based on an outline of their research and the work to be presented at an academic conference.

We would like to warmly congratulate the winners of this year’s Travel Awards and wish them the greatest success with their future research endeavors. MDPI will continue to enhance communication among scientists.

Actuators:

• Matthew Wei Ming Tan, Nanyang Technological University, Singapore.

Applied Sciences:

• Márcia de Sousa Oliveira, University of León, Spain;
• Caroline Sarah Taylor, University of Sheffield, UK;
• Raquel Viveiros, NOVA University of Lisbon, Portugal;
• Alfonso González Briones, University of Salamanca, Spain;
• Alen Horvat, University Carlos III Madrid, Spain;
• Marie Švecová, University of Chemistry and Technology, Czech Republic;
• Venanzio Giannella, University of Salerno, Italy;
• Michaël Lobet, University of Namur, Belgium;
• Lam Thi Ngoc Tran, National Research Council, Italy;
• Hanfei Mei, University of South Carolina, USA.

Applied System Innovation:

• Mert Nakip, Polish Academy of Sciences, Poland.

Biosensors:

• Mengdi Bao, Rochester Institute of Technology, USA;

Yichi Su, Stanford University, USA.

Buildings:

• Karthik Panchabikesan, Concordia University, Canada;
• Xiaolei Yuan, Tongji University, China.

Chemosensors:

• Verónica Montes García, Université de Strasbourg & CNRS, France.

Electronics:

• Peng Hang, Nanyang Technological University, Singapore;
• Alfonso González Briones, University of Salamanca, Spain.

Fluids:

• Alberto Zingaro, Politecnico di Milano, Italy;
• Sarah E. Morris, Auburn University, USA.

Infrastructures:

• Angelo Aloisio, University of L’Aquila, Italy;
• André Filipe Castanheira Alves Furtado, University of Porto, Portugal.

Journal of Low Power Electronics and Applications:

• Tommaso Zanotti, University of Modena and Reggio Emilia, Italy.

Journal of Manufacturing and Materials Processing:

• Nagalingam Arun Prasanth, Rolls-Royce@NTU Corporate Lab, Singapore.

Machines:

• Muhammad Jamil, Nanjing University of Aeronautics and Astronautics (NUAA), China;
• Mariagrazia Tristano, Sheffield Hallam University, UK.

Processes:

• Michele Schlich, University of Cagliari, Italy;
• Álvaro Santana Mayor, University of La Laguna, Spain.

Sensors:

• Eleonora Macchia, Åbo Akademi University, Finland;
• Alfonso Gonzalez Briones, University of Salamanca, Spain;
• Saúl Vallejos Calzada, University of Burgos, Spain;
• Ana Novo, University of Vigo, Spain;
• Yalin Liu, Macau University of Science and Technology, China;
• Marilena Giglio, Politecnico of Bari, Italy;
• Yuzhi Shi, Nanyang Technological University (NTU), Singapore.

In order to acknowledge our reviewers, who so generously dedicate their time to reviewing papers and demonstrate diligence, professionalism, and timeliness when reviewing manuscripts, MDPI journals regularly offer outstanding reviewer awards to scholars who participate in the peer-review process.

We are proud to recognize the winners for the year 2021 in the “Engineering” category for their outstanding contributions among extensive competition by presenting them with an Outstanding Reviewer Award.

We would like to take this opportunity to congratulate all of the winners on their achievement. MDPI will continue to provide support and recognition to the academic community.

Actuators:

• Ryszard Dindorf, Kielce University of Technology, Poland.

Applied Sciences:

• Khaled Giasin, University of Portsmouth, UK;
• Jakub Krzysztof Grabski, University of Technology, Poland;
• Marcos Tostado-Véliz, University of Jaén, Spain;
• Luigi Pugliese, University of Calabria, Italy;
• Francesco Bennardo, University of Catanzaro, Italy;
• Heriberto Perez-Acebo, University of the Basque Country UPV/EHU, Spain.

Biosensors:

• Amir Hatamie, University of Gothenburg, Sweden.

Buildings:

• Francesco Fiorito, Polytechnic University of Bari, Italy;
• Paul G. O’Brien, York University, Canada.

Chemosensors:

• Verónica Montes García, University of Strasbourg, France.

Machines:

• Piotr Gierlak, Rzeszow University of Technology, Poland;
• Sebastian A. Nugroho, University of Michigan, USA;
• Viorel Paleu, Gheorghe Asachi Technical University of Iasi, Romania.

Processes:

• Marcin Dębowski, University of Warmia and Mazury in Olsztyn, Poland;
• Bartłomiej Zieniuk, Warsaw University of Life Sciences, Poland;
• Zbigniew Nadolny, Poznan University of Technology, Poland;
• Attila Egedy, University of Pannonia, Hungary;
• Seok-Ho Rhi, Chungbuk National University, Korea.

Sensors:

• Hojong Choi, Kumoh National Institute of Technology, Korea;
• Li Fu, Hangzhou Dianzi University, China;
• Leonardo De Mello Honorio, Federal University of Juiz De Fora Juiz De Fora, Brazil;
• Mario Versaci, Mediterranea University, Italy;
• Robertas Damasevicius, Kaunas University of Technology, Lithuania.

Date: 14 July 2022
Time: 3:00 p.m. CEST | 9:00 a.m. EDT | 9:00 p.m. CST Asia
Webinar ID: 890 5218 6355
Register for free here: https://electronics-5.sciforum.net/#registration

In this webinar, the focus will be on advanced techniques for the design of effective and reliable low-power and ultra-low-power integrated circuits attributed to our invited speakers. Audience members will have the opportunity to expand their knowledge and engage in a Q&A with the speakers.

Chair:

 

Name: Prof. Dr. Anna Richelli
Affiliation: Editorial Board Member of the Section “Circuit and Signal Processing” in Electronics
Interests: design of ultra-low-voltage analog circuits; electromagnetic interference analysis in integrated circuits; integrated voltage converters; CMOS operational amplifiers

Speakers:

Name: Dr. Pedro Filipe Leite Correia de Toledo
Affiliation: Topical Advisory Panel Member of the Section “Circuit and Signal Processing” in Electronics
Presentation title: “Nanoscale Digital-Based Analog Processing: How to Design Analog Building Blocks Using Only Digital Gates”

Dr. Pedro Filipe Leite Correia de Toledo is an Electronic Engineer with more than ten years of experience developing CMOS RF/Analog Integrated Circuits. Currently, he is a Mixed-Signal IC designer in Synopsys, working in SERDES designs with sub-10nm CMOS technology. He has received a Ph.D. at Polito and UFRGS (Joint-Degree Ph.D.) working with digital-based analog processing for IoT applications. He has finished his M.Sc. degree in microelectronics from UFRGS, working with low thermal sensitivity analog applications based on ZTC and GZTC MOSFET bias point modeling. He has also received a BSEE (2010), and an RF IC Designer Specialization Course (IC-Brazil Program–2011) at the Federal University of Pernambuco (UFPE) and the Federal University of Rio Grande do Sul (UFRGS), respectively. He has also won the award for the best master's thesis in the design, CAD, and IC Test category in 2015 from the Brazilian Society of Microelectronics (SBMICRO). In 2019, he was awarded the Best Student Paper Award of the 2019 IEEE International Conference on Electronics, Circuits, and Systems (ICECS 2019). He possesses a sound understanding of fundamental principles and trends in electronic engineering. He can work and study at the same time, and is eager to learn and adapt to new environments, products, and projects.

Name: Dr. Roberto Rubino
Affiliation: Department of Electronics and Telecommunications, Politecnico di Torino, 10129 Turin, Italy
Presentation title: “Relaxation Digital to Analog Converter”

Dr. Roberto Rubino received his B.Sc. degree and his M.Sc. degree in electronic engineering at Politecnico di Torino, Italy. Currently, he is continuing his research as a Ph.D. student in Politecnico di Torino, as part of the research activity on "Ultra-Low Power, Mostly Digital, Integrated Interfaces for the Internet of Things".

Name: Prof. Dr. Inhee Lee
Affiliation: Editorial Board Member of the Section “Circuit and Signal Processing” in Electronics
Presentation title: “Millimeter-Scale Smart Sensing System”

Prof. Dr. Inhee Lee received his B.Sc. and M.Ss. degrees in electrical and electronic engineering from Yonsei University, Seoul, Korea, in 2006 and 2008, respectively, and a Ph.D. degree in electrical engineering from the University of Michigan, Ann Arbor, MI, USA, in 2014. From 2015 to 2019, he was with the University of Michigan as an assistant research scientist. In 2019, he joined the University of Pittsburgh as an assistant professor. His research includes adaptive circuit/system design, ultra-low-power power management circuits, and energy-efficient sensor interface circuits. Additionally, he is developing millimeter-scale or even smaller sensing/computing systems for ecological, biomedical, energy exploration, and internet-of-things applications.

For any questions about the webinar, please send an email to electronics.webinar@mdpi.com.