25 Results Found

Free-standing copper oxide (Cu2O)-copper hydroxide (Cu(OH)2) nanocomposites with enhanced catalytic and antibacterial functionalities were synthesized on copper mesh using a green method based on spinach leaf extract and glycerol. EDX, SEM, and TEM a...

In this study, nanostructured copper oxide-based films with crystallite size below 10 nm were electrochemically synthesized on copper foil and foam electrodes and investigated for their supercapacitive behaviour. The synthesis was carried out via cyc...

Herein we describe an alternative strategy to achieve the preparation of nanoscale Cu3N. Copper(II) oxide/hydroxide nanopowder precursors were successfully fabricated by solution methods. Ammonolysis of the oxidic precursors can be achieved essential...

Nanostructured films of copper, zinc, and nickel oxides were obtained from a controlled oxidation of the ternary nickel silver (Cu-Zn-Ni) substrates through a one-pot, green, and low temperature vapor-based treatment. Brief contact of the alloy with...

Shape-specific copper oxide nanostructures have attracted increasing attention due to their widespread applications in energy conversion, sensing, and catalysis. Advancing our understanding of structure, composition, and surface chemistry transformat...

In pyrometallurgical processes refining copper, the main source of loss in the conversion stage is from slag. This paper reports on research work treating converter slag containing high percentages of copper (36 wt%) using ammonium hydroxide at room...

Nanosized SSZ-13 was synthesized hydrothermally by applying N,N,N-trimethyl-1-adamantammonium hydroxide (TMAdaOH) as a structure-directing agent. In the next step, the quantity of TMAdaOH in the initial synthesis mixture of SSZ-13 was reduced by half...

Mechanism of copper nanostructuring by oxides and hydroxide formation during anodizing is not fully understood. At the same time, the search for novel copper anodizing regimes and electrolytes is ongoing due to multiple potential applications. In thi...

Metal-filled composites based on polypropylene waste have been successfully obtained with an injection molding method of metalized polymer raw materials. Using the model polymer, the peculiarities of the formation of the copper layer in solutions of...

The thermal decomposition processes of coprecipitated Cu-Ni-Al and Cu-Ni-Fe hydroxides and the formation of the mixed oxide phases were followed by thermogravimetry and derivative thermogravimetry analysis (TG – DTG) and in situ X-ray diffracti...

The presence of arsenic-bearing minerals in ores, notably enargite (Cu3AsS4), remains an unresolved issue for copper beneficiation processes, including those for porphyry copper deposits. In particular, several operational challenges remain for the s...

Composites of Laponite and Cu–Mn hopcalite-related mixed oxides, prepared from hydrotalcite-like (Htlc) precursors obtained in inverse microemulsions, were synthesized and characterized with XRF, XRD, SEM, TEM, H2 temperature-programmed reducti...

The development of a heterojunction nanocomposite leads to improved optoelectronic properties. Herein, ceria (CeO2), copper oxide (CuO), and ceria–copper–copper hydroxide (CeO2-CuO-Cu(OH)2) nanocomposites were prepared via a facile chemic...

We analyzed a process to fabricate a superhydrophilic surface on copper by forming various laser-induced periodic surface structures (LIPSS) using a Ti/sapphire femtosecond laser. For these structured surfaces, the correlation between the surface str...

Sodium thioglycolate is a chalcopyrite depressant, but its depressant effect is weak. The paper investigated the effect of CuSO4 on the depressant performance of sodium thioglycolate towards chalcopyrite through flotation tests, Zeta potential measur...

Copper shaft furnace (CSF) dust containing valuable metals with a composition of 44.02% Zn and 14.57% Pb, in the form of oxides (PbO and ZnO), was used for leaching in 1 mol/L sodium hydroxide lixiviant at a temperature of 80 °C. The leaching eff...

The Fe-based amorphous alloy (Fe78Si9B13AP) is applied to the remediation of copper contaminated soil for the first time. The dynamic process of conversion of movable Cu to immobilized forms in the soil system is analyzed. In addition, the dynamic pr...

Effective removal of toxic inorganic and organic pollutants is one of the current leading challenges of wastewater treatment. In this study, the decomposition of methylene blue (MB) under UV light irradiation was investigated in the presence of coppe...

Bearing in mind the metal rich composition of printed circuit boards (PCBs), this material represents a secondary source of valuable metals and offers an entrepreneurial opportunity in the metal sales market. Based on the ability of microorganisms to...

Metakaolin-based geopolymer cements were produced by alkaline activation with a potassium hydroxide and potassium silicate solution. To produce the geopolymer composites, 10 wt.% titanium oxide (TiO2) and 5 wt.% copper oxide (CuO) nanoparticles were...

Graphene oxide and its magnetic nanoparticle-based composites are a well-known tool to remove heavy metals from wastewater. Unfortunately, one of the major issues in handling such small particles consists of their difficult removal from treated waste...

We carried out a comprehensive study of native gold (morphology, composition, intergrowths, and microinclusions) from alluvial deposits of the Kamenny stream (Ozerninsky ore cluster, Western Transbaikalia, Russia). The study showed that there were fo...

It is well-established that the structural, morphological and performance characteristics of nanoscale materials critically depend upon the dispersion state of the nanofillers that is, in turn, largely determined by the preparation protocol. In this...

This paper reviews and summarizes the available information on the composition of palladian gold with various contents and sets of isomorphic impurities (Ag, Cu, Hg) at 50 deposits and ore occurrences with Au-Pd mineralization. It is revealed that Pa...

There exists a multitude of pathogens that pose a threat to human and public healthcare, collectively referred to as ESKAPE pathogens. These pathogens are capable of producing biofilm, which proves to be quite resistant to elimination. Strains of A....