Skip to Content

13 Results Found

  • Article
  • Open Access
1 Citations
3,858 Views
24 Pages

Numerical Investigation of Preload Process of Bolted Joint with Superelastic Shape Memory Alloy

  • Xiangjun Jiang,
  • Yongkun Wang,
  • Fengqun Pan,
  • Ze Jing and ,
  • Jin Huang and
  • Baotong Li
  • + 1 author+ 0 author

17 September 2018

A phenomenological constitutive model is developed to describe the uniaxial transformation ratcheting behaviors of the superelastic shape memory alloy (SMA) by employing a cosine–type phase transformation equation with the initial martensite ev...

  • Article
  • Open Access
1 Citations
2,658 Views
16 Pages

A Study of Preload Detection Technology in Suspension Bridge Cable Clamp Bolts Based on the Pull-Out Method

  • Fengrui Mu,
  • Gui Zhu,
  • Yongjun Zhou,
  • Zhongguo John Ma and ,
  • Yuan Jing and
  • Yu Zhao
  • + 1 author+ 0 author

The pull-out method is a simple and effective method for detecting the preload of suspension bridge cable clamp bolts. However, research on the pull-out method is currently limited. The force principles governing the bolt during the pulling process a...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
12 Citations
3,459 Views
22 Pages

Semi-Physical Simulation Optimization Method for Bolt Tightening Process Based on Reinforcement Learning

  • Huibin Zhang,
  • Mingwei Wang,
  • Wei Deng,
  • Jianhua Zhao and ,
  • Jingtao Zhou,
  • Xin Ma,
  • Lu Yao and
  • Manxian Wang
  • + 3 authors+ 0 author

1 August 2022

Bolted connections are the main method of connecting the components of an aero-engine low pressure rotor. Due to the influence of the elastic interaction relationship, it is easy to cause uneven distribution of the preload force of the bolt group, al...

(This article belongs to the Section Electrical Machines and Drives)
  • Article
  • Open Access
4 Citations
3,190 Views
25 Pages

Prediction of Pre-Loading Relaxation of Bolt Structure of Complex Equipment under Tangential Cyclic Load

  • Xiaohan Lu,
  • Min Zhu,
  • Chao Li,
  • Shengnan Li and ,
  • Shengao Wang and
  • Ziwei Li
  • + 1 author+ 0 author

22 May 2024

Bolts have the advantages of simple installation and easy removal. They are widely applied in aerospace and high-speed railway traffic. However, the loosening of bolts under mixed loads can lead to nonlinear decreases in pre-loading. This affects the...

(This article belongs to the Special Issue Machine Health Monitoring and Fault Diagnosis Techniques  (Volume II))
  • Feature Paper
  • Article
  • Open Access
22 Citations
8,475 Views
14 Pages

24 May 2020

The use of bolted joints to connect the transition piece and monopile is nowadays widely applied in the offshore wind industry. Traditionally, grouted connections were used in the early generation of offshore wind turbines, but the experienced failur...

(This article belongs to the Special Issue Microstructure, Deformation, and Fatigue Behavior in Metals)
  • Article
  • Open Access
3 Citations
2,798 Views
17 Pages

Analysis and Experimental Study of Contact Stress in Bolted Connections of Pitch Bearings

  • Jiuju Zhang,
  • Wanxin Luo,
  • Tao Chen,
  • Xichao Yan and ,
  • Jiaqi Zhang,
  • Meng Zhu and
  • Hongwei Zhang
  • + 2 authors+ 0 author

In wind turbine systems, bolted connections in pitch bearings are subjected to working loads that reduce bolt preload. This reduction can lead to issues such as bolt loosening and eccentric loading, which in turn results in the nonuniform distributio...

  • Article
  • Open Access
10 Citations
2,907 Views
12 Pages

Fracture Mode Transition during Assembly of TC4 High-Lock Bolt under Tensile Load: A Combined Experimental Study and Finite Element Analysis

  • Derong Feng,
  • Chenxi Dong,
  • Yunpeng Hu,
  • Yamei Wang and ,
  • Jianhua Ma,
  • Zhangdong Huang and
  • Qiang Wan
  • + 2 authors+ 0 author

7 June 2022

Fracture during the assembly process is an important failure mode for high-lock bolts used in the aviation industry, which greatly increases the potential of unpredictable accidents during service. In the current study, the underlying reasons for fra...

(This article belongs to the Special Issue Mechanical and Metallurgical Characterizations of Advanced Alloys)
  • Article
  • Open Access
4 Citations
1,351 Views
14 Pages

19 July 2025

The integrity of bolted components primarily relies on the quality of interfacial contact, which is achieved by maintaining prescribed bolt torque levels. However, challenges arise from corrosion-induced bolt head damage, potentially compromising the...

(This article belongs to the Special Issue Advanced Sensors in Nondestructive Testing and Structural Health Monitoring)
  • Article
  • Open Access
3 Citations
2,255 Views
18 Pages

Investigation of Shear Behavior in High-Strength Bolt Connectors for Steel–Concrete Composite Beams

  • Wei Li,
  • Jie Wang,
  • Xiaobo Xing,
  • Huining Liu and ,
  • Jin Di,
  • Xianchao Sun,
  • Leibo Li,
  • Hongwei Li and
  • Fengjiang Qin
  • + 4 authors+ 0 author

17 December 2024

High-strength bolt connectors, known for their robust strength and ease of disassembly, are suitable not only for the construction of new steel–concrete composite beams but also for reinforcing existing composite or steel beams. Static push-out...

(This article belongs to the Special Issue Green and Sustainable Infrastructure Construction Materials (2nd Edition))
  • Article
  • Open Access
13 Citations
8,346 Views
26 Pages

14 December 2023

Loosening failure of bolted joints often occurs in a vibration environment. This may induce the separation of clamped components and even result in catastrophic consequences in certain situations. Various anti-loosening bolted connections have been d...

  • Article
  • Open Access
6 Citations
3,243 Views
14 Pages

26 March 2023

In this research, the fatigue damage behavior under three-point bending of a composite joint incorporating a single countersunk fastener is investigated. Firstly, a self-developed fatigue test system was set up to test the fatigue characteristics of...

(This article belongs to the Special Issue Advances in Fiber Reinforced Polymer Composites)
  • Article
  • Open Access
5 Citations
3,118 Views
18 Pages

Study on Flexural Performance of Aluminum Alloy Gusset Joints Subjected to Bending Moment and Shear Force

  • Hao Wang,
  • Jialiang Li,
  • Pengcheng Li,
  • Li Zhong and ,
  • Xiaoyue Zhang and
  • Chao Li
  • + 1 author+ 0 author

6 April 2023

Aluminum alloy gusset (AAG) joints are widely applied in space reticulated shell structures. To investigate the flexural performance of AAG joints under the combined action of shear force and in-plane and out-of-plane bending moments, this analysis w...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
1,213 Views
13 Pages

Numerical and Experimental Investigation of Fretting Wear in Connecting Rod Big-End Bearings of Nuclear Emergency Diesel Generators

  • Shuai Zu,
  • Pingsheng Hu,
  • Xi Yang,
  • Yang Li and ,
  • Yinhui Che,
  • Jianghong Zhang,
  • Xiaohu Yang and
  • Yi Cui
  • + 3 authors+ 0 author

The operational reliability of Emergency Diesel Generators (EDGs) is paramount for the safety of nuclear power plants. This study investigates the fretting wear mechanism on the non-working back-face of connecting rod big-end bearings—a critica...

(This article belongs to the Special Issue Lubrication and Tribology Challenges in Renewable Energy and High-Efficiency Power-Generation Systems)