The relationship between emissivity, delay time, and surface growth for metastable solidification of CoSi-62 at. % eutectic alloys is reported from undercooling experiments conducted using electrostatic levitation. A fraction of the undercooled melt...
Ag-28.1 wt. % Cu eutectic alloy solidifies in the form of eutectic dendrite at undercooling above 76 K. The remelting and ripening of the original lamellar eutectics result in the formation of the anomalous eutectics in the final microstructure. The...
The present work compared the solidification pattern of un-inoculated and inoculated hypoeutectic grey cast irons (3.7–3.8% CE), focused on carbide to graphite formation transition, by the use of an adequate experimental technique, able to meas...
The solidification cooling curve itself as well as its first derivative, and related temperatures, reported to the calculated equilibrium temperatures in stable and metastable solidification systems, are used to predict the solidification characteris...
The undercooling (∆T) dependencies of the solidification pathways, microstructural evolution, and recalescence behaviors of undercooled Co-18.5at.%B eutectic alloys were systematically explored. Up to four possible solidification pathways were...
A system of steady lamellar eutectic growth in directional solidification is considered with the case of small tangent values of the contact angles. The mathematical model is given in the non-dimensional rectangular coordinate system and the uniforml...
The main objective of the present paper is to evaluate by thermal (cooling curve) analysis the solidification pattern and the occurrence of the layer of degenerate graphite at the surface of ductile iron castings (3.15% Si, typically as 450-18 grade,...
Microstructure has significant effects on the mechanical properties of AlSi10Mg alloy. Therefore, an in-depth understanding of microstructure evolution, such as dendrite and Al-Si eutectic, is of great significance to obtain the desirable microstruct...
The paper presents a study of the phase selection and microstructure evolution of Fe75B25 alloy subjected to solidification at various undercoolings. The alloy invariably solidifies into a primary Fe2B phase and α-Fe/Fe2B eutectic at all the ex...
This study investigates eutectic morphology transitions in Ni-Sn alloys using Bridgman directional solidification with a transition variable speed coupled with cellular automaton (CA) simulations. Steady-state solidification (0.1–2000 μm/s)...
The effects of adding different Ce contents (0–0.32 wt.%) on the microstructure, mechanical properties, and fracture morphology of industrial A357 cast alloy in as-cast and T6 heat treatment were studied. The main purpose of this study is to im...
SiO2 encapsulated SnZnCu microspheres (several micrometers to about 30 μm in diameter) with very low undercooling, narrow freezing/melting range, and high thermal cycling stability have been produced and used as the temperature stabilizer of the p...
The effect of La addition on primary α-Al and the eutectic Si phase of Al-7Si alloy is investigated systematically in this work. The results indicate that La addition causes a multi-refining efficiency on the microstructure of Al-7Si alloy, inc...
Classical eutectic growth models are based on the use of eutectic composition. These models neglect the effect of primary phase formation, and their direct use in the rapid solidification process of off-eutectic (hypoeutectic and hypereutectic) alloy...
Diverse non-equilibrium eutectic structures have attracted numerous experimental and theoretical studies. One special type is the formation of a halo of one phase around a primary dendrite of another phase. In our experiments, it was occasionally obs...
To gain insight into the solidification of the Ni-10.95 at. % and B-3.23 at. % Si alloy, 29 cast samples extracted from a casting of this alloy were remelted under an Ar atmosphere, using either DSC or an in-house thermal analysis apparatus. Ni(fcc)...
This work analyzes the growth of graphite in the eutectic system of gray cast iron, focusing on laminar type A and undercooled type D morphology, and a modified morphology, such as vermicular or compact graphite. The objective of the study is to find...
Using fluxing technology, molten Fe80P14B6 alloy achieved significant undercooling (ΔT). Experimental results demonstrate that the solidified morphologies of the Fe80P14B6 alloy vary considerably with ΔT. At ΔT = 100 K, the microstr...
Inoculation of cast iron has become a commonly used metallurgical process, which is carried out in a foundry in order to improve the mechanical properties of utility alloys. It consists in changing the physicochemical state of the melted alloy. This...
The directionally solidified eutectic alloy NiAl-(Cr,Mo) is a promising candidate for structural applications at high temperatures, due to its increased creep resistance compared to its single phase B2ordered NiAl counterpart. This system yields an e...
Semisolid slurry of A356 aluminum alloy was prepared by Self-Inoculation Method, and the secondary solidification behavior during rheo-diecasting forming process was researched. The results indicate that the component with non-dendritic and uniformly...
Extensive research has been conducted on Ti–Fe–Sn ultrafine eutectic composites due to their high yield strength, compared to conventional microcrystalline alloys. The unique microstructure of ultrafine eutectic composites, which consists...
The use of secondary aluminium is increasingly being promoted in the automotive industry for environmental reasons. The purpose of this study was to demonstrate that it is possible to obtain a recycled AlSi10MnMg(Fe) aluminium alloy with equal metall...
This study investigates the influence of cooling rates on the microstructure and phase transformations of the high-entropy alloy Cr16Mn16Fe16Co16Ni16P20. The alloy was synthesized via arc melting and subjected to three cooling conditions: slow coolin...
A study was undertaken to investigate the effects of small boron additions on the solidification and microstructure of hypo-eutectic alloyed grey cast iron. The characteristic temperatures upon crystallisation of the treated metal melt were recorded,...
A comparative study of the metal emulsion-based synthesis of Sn-based materials in two different types of molten salts (namely LiCl–KCl–CsCl and LiNO3-NaNO3-KNO3 eutectics) is presented, and the properties of Sn, Sn-Cu and Sn-Cu-Zn micros...
The phase composition and morphological characteristics of eutectic carbides are key factors affecting the wear resistance and fatigue life of high-speed steel. In this study, a combination of experimental characterization and thermodynamic calculati...
In this paper, the effect of Si (1, 3, 5, 6 wt.%) and P (5, 10, 15, 20, 30 ppm) content on the Si phase and solidification behavior of Al-40Zn-xSi alloys are investigated via phase diagram calculation, scanning electron microscopy (SEM) and synchrotr...
Alloying with Al, Cr, Sn, and Ti significantly improves the oxidation of Nb silicide-based alloys at intermediate and high temperatures. There is no agreement about what the concentration of Sn in the alloys should be. It has been suggested that with...
This study addresses the issues of coarse primary austenite dendrites and uneven graphite distribution in hypoeutectic gray cast iron. High-energy mechanical activation technology was used to prepare high-energy activated SiC particles (EASiCp), and...
The effect of alloying the Eu element on primary Si refinement in varied purity Al–16Si alloys was studied by scanning electron microscopy (SEM), thermal analysis, micro x–ray diffraction (μ–XRD), electron probe microanalysis (EP...
The present study focused on 10 wt.% TiB2@Ti/AlCoCrFeNi2.1 eutectic high-entropy alloy matrix composites (EHEAMCs), which were treated with furnace cooling (FC), air cooling (AC), and water cooling (WC) after being held at 1000 °C for 12 h, aimin...
Laser Surface Remelting (LSR) was applied to arc-melted Al-20Si-0.2Sr, Al-20Si-0.2Ce, and Al-20Si hypereutectic alloys to refine microstructures. Experiments revealed that microstructures in the melt pool varied from fully eutectic to a mixture of Al...