Gases

The naturally occurring radioactive gas radon presents a major public health danger mainly affecting people who spend time in poorly ventilated buildings. The periodic table includes radon as a noble gas which forms through uranium decay processes in soil, rock, and water. The accumulation of radon indoors in sealed or poorly ventilated areas leads to dangerous concentrations that elevate human health risks of lung cancer. The research examines environmental variables affecting radon concentration indoors by studying geothermal installations and their drilling activities, which potentially increase radon emissions. The study was conducted in the basement of the plumbing educational building at the Aristotle University of Thessaloniki to assess the potential impact of geothermal activity on indoor radon levels, as the building is equipped with a geothermal heating system. The key findings based on 150 days of continuous data showed that radon levels peak during the cold days, where the concentration had a mean value of 41.5 Bq/m³ and reached a maximum at about 95 Bq/m³. The reason was first and foremost poor ventilation and pressure difference. The lowest concentrations were on days with increased human activity with measures that had a mean value of 14.8 Bq/m³, which is reduced by about 65%. The results that are presented confirm the hypotheses and the study is making clear that ventilation and human activity are crucial in radon mitigation, especially on geothermal and energy efficient structures. Full article

Minimizing carbon dioxide emissions is crucial due to the generation of energy from fossil fuels. The significance of carbon capture and storage (CCS) technology, which is highly successful in mitigating carbon emissions, has increased. On the other hand, hydrogen is an important energy carrier for storing and transporting energy, and technologies that rely on hydrogen have become increasingly promising as the world moves toward a more environmentally friendly approach. Nevertheless, the integration of CCS technologies into power production processes is a significant challenge, requiring the enhancement of the combined power generation–CCS process. In recent years, there has been a growing interest in process intensification (PI), which aims to create smaller, cleaner, and more energy efficient processes. The goal of this research is to demonstrate the process intensification potential and to model and simulate a hybrid integrated–intensified adsorptive-membrane reactor process for simultaneous carbon capture and hydrogen production. A comprehensive, multi-scale, multi-phase, dynamic, computational fluid dynamics (CFD)-based process model is constructed, which quantifies the various underlying complex physicochemical phenomena occurring at the pellet and reactor levels. Model simulations are then performed to investigate the impact of dimensionless variables on overall system performance and gain a better understanding of this cyclic reaction/separation process. The results indicate that the hybrid system shows a steady-state cyclic behavior to ensure flexible operating time. A sustainability evaluation was conducted to illustrate the sustainability improvement in the proposed process compared to the traditional design. The results indicate that the integrated–intensified adsorptive-membrane reactor technology enhances sustainability by 35% to 138% for the chosen 21 indicators. The average enhancement in sustainability is almost 57%, signifying that the sustainability evaluation reveals significant benefits of the integrated–intensified adsorptive-membrane reactor process compared to HTSR + LTSR. Full article

This work uses the MATLAB Reservoir Simulation Toolbox (MRST) to reduce the 3D reservoir model into a 2D version in order to investigate CO₂ storage in the Aurora model using the vertical equilibrium (VE) model. For this purpose, we used an open-source reservoir simulator, MATLAB Reservoir Simulation Toolbox (MRST). MRST is an open-source reservoir simulator, with supplementary modules added to enhance its versatility in addition to a core set of procedures. A fully implicit discretization is used in the numerical formulation of MRST-co2lab enabling the integration of simulators with vertical equilibrium (VE) models to create hybrid models. This model is then compared with the Eclipse model in terms of properties and simulation results. The relative permeability of water and gas can be compared to verify that the model fits the original Eclipse model. Comparing the fluid viscosities used in MRST and Eclipse also reveals comparable tendencies. However, reservoir heterogeneity is the reason for variations in CO₂ plume morphologies. The upper layers of the Eclipse model have lower permeability than the averaged MRST model, which has a substantial impact on CO₂ transport. According to the study, after 530 years, about 17 MT of CO₂ might be stored, whereas 28 MT might escape the reservoir, since after 530 years CO₂ plume reaches completely the open northern boundary. Additionally, a sensitivity analysis study has been conducted on permeability, porosity, residual gas saturation, rock compressibility, and relative permeability curves which are the five uncertain factors in this model. Although plume migration is highly sensitive to permeability, porosity, and rock compressibility variation, it shows a slight change with residual gas saturation and relative permeability curve in this study. Full article

Carbon dioxide (CO₂) geosequestration is a critical technology for reducing greenhouse gas emissions, with shale caprocks, such as Opalinus Clay (OPA), serving as essential seals to prevent CO₂ leakage. This study employs computational fluid dynamics and finite element analysis to investigate the hydromechanical behavior of OPA during CO₂ injection, integrating qualitative and quantitative insights. Validated numerical models indicate that capillary forces are the most critical factor in determining the material’s reaction, with an entry capillary pressure of 2–6 MPa serving as a significant threshold for CO₂ breakthrough. The numbers show that increasing the stress loading from 5 to 30 MPa lowers permeability by 0.3–0.45% for every 5 MPa increase. Porosity, on the other hand, drops by 9.2–9.4% under the same conditions. The OPA is compacted, and axial displacements confirm numerical models with an error margin of less than 10%. Saturation analysis demonstrates that CO₂ penetration becomes stronger at higher injection pressures (8–12 MPa), although capillary barriers slow migration until critical pressures are reached. These results demonstrate how OPA’s geomechanical stability and fluid dynamics interact, indicating that it may be utilized as a caprock for CO₂ storage. The study provides valuable insights for enhancing injection techniques and assessing the safety of long-term storage. Full article

Micro gas turbines serve small-scale generation where swift response and low emissions are highly valued, and they are commonly fuelled by natural gas. True to their ‘micro’ designation, their size is indeed compact; however, a noteworthy portion of the enclosure is devoted to power electronics components. This article considers whether these components can be made even smaller by substituting their conventional silicon switches with switches fashioned from silicon carbide. The wider bandgap of silicon carbide permits stronger electric fields and reliable operation at higher temperatures, which together promise lower switching losses, less heat, and simpler cooling arrangements. This study rests on a simple volumetric model. Two data sets feed the model. First come the manufacturer specifications for a pair of converter modules (one silicon, the other silicon carbide) with identical operation ratings. Second are the operating data and dimensions of a commercial 100 kW micro gas turbine. The model splits the converter into two parts: the semiconductor package and its cooling hardware. It then applies scaling factors that capture the higher density of silicon carbide and its lower switching losses. Lower switching losses reduce generated heat, so heatsinks, fans, or coolant channels can be slimmer. Together these effects shrink the cooling section and, therefore, the entire converter. The findings show that a micro gas turbine inverter built with silicon carbide occupies about one fifth less space and delivers more than a quarter higher power density than its silicon counterpart. Full article

This work examines how multiphase flow behavior during CO₂ and N₂ displacement in a microfluidic chip under capillary-dominated circumstances is affected by interfacial tension (IFT) and the viscosity ratio. In order to simulate real pore-scale displacement operations, microfluidic tests were performed on a 2D rock chip at flow rates of 1, 10, and 100 μL/min (displacement of water by N₂/supercritical CO₂). Moreover, core flooding experiments were performed on various sandstone samples collected from three different geological basins in Australia. Although CO₂ is notably denser and more viscous than N₂, the findings show that its displacement efficiency is more influenced by the IFT values. Low water recovery in CO₂ is the result of non-uniform displacement that results from a high mobility ratio and low IFT; this traps remaining water in smaller pores via snap-off mechanisms. However, due to the blebbing effect, N₂ injection enhances the dissociation of water clots, resulting in a greater swept area and fewer remaining water clusters. The morphological investigation of the residual water indicates various displacement patterns; CO₂ leaves more retained water in irregular shapes, while N₂ enables more uniform displacement. These results confirm earlier studies and suggest that IFT has a crucial role in fluid displacement proficiency in capillary-dominated flows, particularly at low flow rates. This study emphasizes the crucial role of IFT in improving water recovery through optimizing the CO₂ flooding process. Full article

This study evaluated the effects of feedstuffs and additives in dairy cow rations on rumen methane production and nitrate content in groundwater. Two basal rations and their supplements were analyzed in regard to proximate parameters, and an in vitro rumen fermentation system assessed methane release and nitrate levels over 72 h. Supplementing dairy cow rations with Brassica rapa (BR) boosted the ether extract content, while silage produced the highest amount of methane. Rapidly degrading substrates like BR and ground maize produced methane faster, but in smaller amounts, than straw and silage. BR, Opuntia ficus-indica (OFI), and Posidonia oceanica (PO)-supplemented rations had mixed effects; PO reduced the methane yield, while OFI increased methane production rates. BR-supplemented rations had the lowest nitrate levels, making it suitable for anaerobic digestion. The multivariate analysis showed strong correlations between crude protein, dry matter, and ash, while high-nitrate substrates inhibited methane production, supporting the literature on the role of nitrates in reducing methanogenesis. These results emphasize the need to balance nutrient composition and methane mitigation strategies in dairy cow ration formulations. Full article

Decarbonization has become a central policy and industrial priority across the European Union, driven by increasingly ambitious climate targets. The EU’s regulatory framework now mandates a 55% reduction in CO₂ emissions by 2030 (compared to 1990 levels), with the overarching goal of achieving climate neutrality by 2050. This challenge is particularly critical for energy-intensive and hard-to-abate sectors, such as the glass industry. This paper begins with a brief overview of the relevant EU regulations and the structure of the Italian glass sector. It then identifies seven key decarbonization levers applicable to the industry. Drawing on literature data and expert consultations, these levers are integrated into two main decarbonization strategies tailored to the Italian context, both aligned with the 2050 net-zero target. This study further analyzes the estimated implementation costs, the barriers associated with each lever, and potential solutions to overcome them. Finally, Italian strategies are compared with decarbonization approaches adopted in other major European countries. The findings indicate that the transition to climate neutrality in the glass sector, while technically and economically plausible, remains highly contingent on the timely deployment of enabling technologies, the alignment of regulatory and financial frameworks, and the establishment of sustained, structured cooperation between industrial stakeholders and public authorities. Full article

This study examines the impact of flare tariff adjustments on gas-flaring volumes in Nigeria. Utilising a 52-year dataset, this analysis demonstrates that the effectiveness of flare tariffs in reducing gas flaring depends on the stringency of imposed charges. To isolate this effect, this study distinguishes between tariff regimes implemented before and after 2018, a pivotal year marked by the introduction of substantially higher tariffs under revised regulations. The findings indicate that the pre-2018 tariffs had no statistically significant effect on gas-flaring volumes, whereas the post-2018 tariffs led to a statistically significant reduction. Specifically, the pre-2018 tariffs were associated with a negligible reduction in flaring (0.05 percentage points), which was statistically insignificant. By contrast, the post-2018 tariff regime resulted in a 9.26 percentage-point decline in flaring volumes, significant at the 1% level. Additional factors contributing to the flaring reduction include oil production levels, oil prices, and the availability of gas infrastructure. These results highlight the critical role of sufficiently stringent tariff policies in achieving substantial reductions in global gas flaring. Full article

Hydrogen is increasingly recognized as a key contributor to a low-carbon energy future, and machine learning (ML) is emerging as a valuable tool to optimize hydrogen production processes. This review presents a comprehensive analysis of ML applications across various hydrogen production pathways, including gray, blue, and green hydrogen, with additional insights into pink, turquoise, white, and black/brown hydrogen. A total of 51 peer-reviewed studies published between 2012 and 2025 were systematically reviewed. Among these, green hydrogen—particularly via water electrolysis and biomass gasification—received the most attention, reflecting its central role in decarbonization strategies. ML algorithms such as artificial neural networks (ANNs), random forest (RF), and gradient boosting regression (GBR) have been widely applied to predict hydrogen yield, optimize operational conditions, reduce emissions, and improve process efficiency. Despite promising results, real-world deployment remains limited due to data sparsity, model integration challenges, and economic barriers. Nonetheless, this review identifies significant opportunities for ML to accelerate innovation across the hydrogen value chain. By highlighting trends, key methodologies, and current gaps, this study offers strategic guidance for future research and development in intelligent hydrogen systems aimed at achieving sustainable and cost-effective energy solutions. Full article

The LNG maritime industry started to anticipate offshore LNG production in tandem with increasing demand for FLNG platforms as offshore gas resources were developed further. The rapid expansion of FLNG deployment demands equipment and procedures that handle challenges associated with weight and space constraints. The chemical composition of LNG will result in slightly fewer CO₂ emissions. While not significant, another crucial aspect is that LNG predominantly comprises methane, which is acknowledged as a greenhouse gas and is more harmful than CO₂. This requires investigation into clean energy fuel supply for power generation systems, carbon emissions from the process, and thermodynamic analysis and optimisation. Focus on supplying fuel for FLNG power generation to reduce the essential management of boil-off fuel gas, which can be researched on the direct reforming method of hydrogen as a marine fuel gas to support the power generation system. The principal reason for choosing hydrogen over other energy sources is its exceptional energy-to-mass ratio (H/C ratio). The most effective method for hydrogen production is the methane reforming process, recognised for generating significant quantities of hydrogen. To optimise the small-scale plant with a carbon capture system (CCS) as integrated into the reforming process to produce blue hydrogen fuel with zero carbon emissions, this research selection focuses on two alternative processes: steam methane reforming (SMR) and autothermal reforming (ATR). Furthermore, the research article will contribute to other floating production platforms, such as FPSOs and FSRUs, and will be committed to clean energy policies that mandate the support of green alternatives in substitution of hydrocarbon fuel utilisation. Full article

The total quantity and energy delivered through a gas grid is calculated using simple formulæ that sum the increments measured at regular time intervals. These calculations are described in international standards (e.g., ISO 15112 and EN 1776) and guidelines (e.g., OIML R140). These guidelines recommend that the associated measurement uncertainty is evaluated assuming the measurement results to be mutually independent. This assumption leads to the underestimation of the measurement uncertainty. To address the growing concern among transmission and distribution system operators, the underlying assumptions of these uncertainty evaluations are revisited and reworked to be more adequate. The dependence of measurement results coming from, e.g., the same flow meter and gas chromatograph will be assessed for correlations, as well as other effects, such as the effect of the chosen mathematical approximation of the totalisation integral and fluctuations in the flow rate and gas quality. In this paper, an outline is given for improvements that can be implemented in the measurement models to render them more responsive to the error structure of the measurement data, temporal effects in these data, and the fluctuations in the gas quality and gas quantity. By impact assessment using a simple scenario involving the injection of (renewable) hydrogen into a natural gas grid, it is shown that these improvements lead to a substantive difference. This preliminary work demonstrates that correlations occur both in the instrumental measurement uncertainty and due to temporal effects in the gas grid. To obtain a fit-for-purpose uncertainty budget for custody transfer and grid balancing, it is key to enhance the current models and standards accordingly. Full article

This study assesses the potential for biogas production from wastewater treatment plants (WWTPs) in Adana, Türkiye, and evaluates the feasibility of transitioning a fleet of 83 municipal buses (ranging from 15 to 24 years old) to operate exclusively on biogas generated from these WWTPs. Biogas production data from three distinct WWTPs in Adana were analyzed, revealing a total annual biogas production of 5,394,346 Nm³. Replacing the diesel fleet with biogas-powered buses was found to yield a significant reduction in environmental impacts. CO₂ emissions were reduced by 84%, particulate matter emissions decreased by 84.4%, and nitrogen oxides (NO_X) dropped by 80%. These findings highlight the substantial potential of wastewater-derived biogas as a renewable energy source in public transportation, not only reducing reliance on non-renewable fuels but also contributing to improved air quality and energy efficiency. Transitioning to biogas-powered buses presents a promising model for sustainable public transportation, with broader implications for reducing the environmental footprint of urban transit systems. Full article

The central Mediterranean and nearby regions were affected by extreme wildfires during the summer of 2021. During the crisis, Türkiye, Greece, Italy, and other countries faced numerous challenges ranging from the near-complete destruction of landscapes to human losses. The crisis also resulted in reduced air quality levels due to increased emissions of pollutants linked to biomass-burning processes. In the Mediterranean Basin, observation sites perform continuous measurements of chemical and meteorological parameters meant to track and evaluate greenhouse gas and pollutant emissions in the area. In the case of wildfires, CO (carbon monoxide) and formaldehyde (HCHO) are effective tracers of this phenomenon, and the integration of satellite data on tropospheric column densities with surface measurements can provide additional insights on the transport of air masses originating from wildfires. At the Lamezia Terme (code: LMT) World Meteorological Organization–Global Atmosphere Watch (WMO/GAW) observation site in Calabria, Southern Italy, a new multiparameter approach combining different methodologies has been used to further evaluate the effects of the 2021 wildfires on atmospheric measurements. A previous study focused on wildfires that affected the Aspromonte Massif area in Calabria; in this study, the integration of surface data, tropospheric columns, and backtrajectories has allowed pinpointing additional contributions from other southern Italian regions, as well as North Africa and Greece. CO data were available for both surface and column assessments, while continuous HCHO data at the site were only available through satellite. In order to correlate the observed peaks with wildfires, surface BC (black carbon) was also analyzed. The analysis, which focused on July and August 2021, has allowed the definition of three case studies, each highlighting distinct sources of emission in the Mediterranean; the case studies were further evaluated using HYSPLIT backtrajectories and CAMS products. The LMT site and its peculiar local wind patterns have been demonstrated to play a significant role in the detection of wildfire outputs in the context of the Mediterranean Basin. The findings of this study further stress the importance of assessing the effects of wildfire emissions over wide areas. Full article

The increase in atmospheric CO₂ caused by human activities has driven the development of technologies to capture this gas before it reaches the atmosphere. This study analyzed CO₂ sorption using amine-based solvents, such as methyldiethanolamine (MDEA), diethylenetriamine (DETA), triethanolamine (TEA), and monoethanolamine (MEA) in 40 wt.% aqueous solutions, under high-pressure conditions (initial pressure: 500 psia) and room temperature (30 °C), in both non-stirred and stirred systems. Piperazine (PZ), a heterocyclic compound, was tested as an additive to improve the kinetics of the CO₂ sorption process. Kinetic and thermodynamic analyses were conducted to evaluate the efficiency of each amine-based solution in terms of reaction rate and CO₂ loading capacity. MEA and TEA exhibited higher reaction rates, while DETA and MDEA were the most thermodynamically efficient due to the highest CO₂ loading capacity. The PZ kinetic behavior depended on the equipment used; in the non-stirred system, no kinetic effect was observed, while in the stirred system, this effect was appreciable. Additionally, a corrosivity study revealed that MEA, a primary amine, was the most corrosive, whereas TEA, a tertiary amine, was the least corrosive. Full article

Biogas usually contains volatile organic compounds such as terpenes, siloxanes, halogenated hydrocarbons, ketones, alcohols, furans and esters whose presence in the biogas is highly dependent on the feedstock. These trace components can affect the integrity of the materials they come into contact with, e.g., equipment, pipelines and engines, and their presence in the gas may pose health, safety and environmental risks. Understanding the composition of gases is a prerequisite to ensure the correct function of gas infrastructure, appliances and vehicles. This study examined how volatile organic compound (VOC) content in biogas varies depending on the feedstock and evaluated the efficiency of different upgrading processes in removing VOCs. The data, primarily collected in Sweden, include biogases produced in digesters and landfills. The selection of VOCs included in this study was based on extensive analysis of samples collected from numerous biogas and biomethane industrial facilities over an extended period, providing a comprehensive overview of VOC composition. The conducted research is intended to serve as a basis for more systematic studies on the influence of process parameters and feedstock composition on the formation of VOCs. The data have multiple potential uses, including predicting which VOCs would be found in biomethane for a given feedstock and upgrading techniques. Additionally, these data can also be used in standardization discussions to assess the plausibility of the proposed limit values and the need to regulate additional compounds. Full article

This article investigates how safety culture impacts the safety performance of blue hydrogen projects. Blue hydrogen refers to decarbonized hydrogen, produced through natural gas reforming with carbon capture and storage (CCS) technology. It is crucial to decide on a suitable safety policy to avoid potential injuries, financial losses, and loss of public goodwill. The system dynamics approach is a suitable tool for studying the impact of factors controlling safety culture. This study examines the interactions between influencing factors and implications of various strategies using what-if analyses. The conventional risk and safety assessments fail to consider the interconnectedness between the technical system and its social envelope. After identifying the key factors influencing safety culture, a system dynamics model will be developed to evaluate the impact of those factors on the safety performance of the facility. The emphasis on safety culture is directed by the necessity to prevent major disasters that could threaten a company’s survival, as well as to prevent minor yet disruptive incidents that may occur during day-to-day operations. Enhanced focus on safety culture is essential for maintaining an organization’s long-term viability. H₂-CCS is a complex socio-technical system comprising interconnected subsystems and sub-subsystems. This study focuses on the safety culture sub-subsystem, illustrating how human factors within the system contribute to the occurrence of incidents. The findings from this research study can assist in creating effective strategies to improve the sustainability of the operation. By doing so, strategies can be formulated that not only enhance the integrity and reliability of an installation, as well as its availability within the energy networks, but also contribute to earning a good reputation in the community that it serves. Full article

This study presents a comparative analysis of CO₂-EOR and water flooding scenarios to optimize oil recovery in a geologically heterogeneous reservoir with a dome structure and partial aquifer support. Using production data from twelve production and three monitoring wells, a dynamic reservoir model was built and successfully history-matched with a 1% deviation from actual field data. Three main recovery methods were evaluated: water flooding, continuous CO₂ injection, and water-alternating-gas (WAG) injection. Water flooding resulted in a four-fold increase from primary recovery, while continuous CO₂ injection provided up to 40% additional oil recovery compared to water flooding. WAG injection further increased recovery by 20% following water flooding. The minimum miscibility pressure (MMP) was determined using a 1D slim-tube simulation to ensure effective CO₂ performance. A sensitivity analysis on CO₂/WAG ratios (1:1, 2:1, 3:1) revealed that continuous CO₂ injection, particularly in high permeability zones, offered the most efficient recovery. An economic evaluation indicated that the optimal development strategy is 15 years of water flooding followed by 15 years of continuous CO₂ injection, resulting in a net present value (NPV) of USD 1 billion. This study highlights the benefits of CO₂-EOR for maximizing oil recovery and suggests further work on hybrid EOR techniques and carbon sequestration in depleted reservoirs. Full article

Excessive emissions of greenhouse gases, primarily carbon dioxide (CO₂), have garnered worldwide attention due to their significant environmental impacts. Carbon capture, utilization, and storage (CCUS) techniques have emerged as effective solutions to address CO₂ emissions. Recently, direct air capture (DAC) and bioenergy with carbon capture and storage (BECCS) have been advanced within the CCUS framework as negative emission technologies. BECCS, which involves cultivating biomass for energy production, then capturing and storing the resultant CO₂ emissions, offers cost advantages over DAC. Algae-based CCUS is integral to the BECCS framework, leveraging algae’s biological processes to capture and sequester CO₂ while simultaneously contributing to energy production and potentially achieving net negative carbon emissions. Algae’s high photosynthetic efficiency, rapid growth rates, and ability to grow in non-arable environments provide significant advantages over other BECCS methods. This comprehensive review explores recent innovations in algae-based CCUS technologies, focusing on the mechanisms of carbon capture, utilization, and storage through algae. It highlights advancements in algae cultivation for efficient carbon capture, algae-based biofuel production, and algae-based dual carbon storage materials, as well as key challenges that need to be addressed for further optimization. This review provides valuable insights into the potential of algae-based CCUS as a key component of global carbon reduction strategies. Full article