Search Results (10)

Carbyne, a linear chain of carbon atoms, possesses extraordinary properties but has remained elusive due to its extreme instability. While encapsulation within carbon nanotubes stabilizes carbyne, a lack of synthetic control over its location has prevented practical use. Here, we introduce a spatially localized plasma jet technique that enables the guided spatially selective self-assembly of carbyne encapsulated within multiwalled carbon nanotube (carbyne@MWCNT) hybrids on graphite surfaces. This method uses intense, localized plasma energy to simultaneously grow nanotubes and synthesize carbyne within them, where the nanotube structure and carbyne encapsulation are governed by the localized heat flux distribution. Beyond confirming carbyne formation via its characteristic Raman mode, we discover its second-order vibrational spectrum, confirming anharmonic interactions between the chain and its nanotube container. This spatial control can be used to architect functional carbyne@MWCNT arrays, whose potential applications are discussed in detail. Full article

A five-month-old female mixed-breed dog presented with a two-week history of polyuria, polydipsia, and vomiting. Clinical examination revealed poor body condition, growth retardation, pale oral mucous membranes, weak pulse, and prolonged capillary refill time. Laboratory findings included neutrophilic leukocytosis with a regenerative left shift, fasting hyperglycemia, elevated fructosamine, glycated hemoglobin, and β-hydroxybutyrate concentrations, while the acid–base balance remained normal. Canine-specific pancreatic lipase and trypsin-like immunoreactivity concentrations ruled out an underlying pancreatitis or exocrine pancreatic insufficiency, respectively. Urinalysis showed glycosuria and ketonuria. Supportive care included antibiotics and regular insulin administration. Abdominal ultrasonography identified a pancreatic cavity with a thick wall and mixed echogenic fluid. Ultrasound-guided drainage was performed without complications. Cytology confirmed a pancreatic abscess with pyogranulomatous inflammation, though the culture results were negative. The dog was discharged with intermediate-acting lente insulin. Follow-up ultrasonographic evaluations at 7, 14, and 21 days and 5 months post-drainage showed no recurrence. The diabetes remained well-controlled one year post-discharge. This case report describes the successful management of a dog with juvenile diabetes mellitus complicated by a pancreatic abscess, highlighting the effectiveness of percutaneous ultrasound-guided drainage combined with medical therapy. Full article

The penetration and propagation of streamers in capillary tubes is critical for applications involving the plasma-enabled disinfection of medical devices like catheters and plasma catalysis. In this study, a guided streamer is generated in a pulsed plasma jet operating in helium and impinged downstream onto a capillary tube with an inner diameter between 75 and 500 µm. The threshold voltage required to start the penetration of the guided streamer into the capillary was determined for both positive and negative polarities, and we observed a time delay between the streamer striking the top of the capillary and its penetration, which was found to be larger for the positive than the negative streamer. The observed differences can be explained by the need to sustain an electric field large enough to generate a sufficient seed electron density in the capillary to launch the streamer. The reported results suggest that the electric field at the capillary inlet is likely reduced by the formation of strong surface ionization waves for positive streamers. Nonetheless, in the case of positive streamers, the formation of surface streamers along the outside of the capillary wall can enhance streamer penetration into the capillary and the streamer propagation speed. Full article

This paper provides an overview of modern research on magnetoplasma methods of influencing gas-dynamic and plasma flows. The main physical mechanisms that control the interaction of plasma discharges with gaseous moving media are indicated. The ways of organizing pulsed energy input, characteristic of plasma aerodynamics, are briefly described: linearly stabilized discharge, magnetoplasma compressor, capillary discharge, laser-microwave action, electron beam action, nanosecond surface barrier discharges, pulsed spark discharges, and nanosecond optical discharges. A description of the physical mechanism of heating the gas-plasma flow at high values of electric fields, which are realized in high-current and nanosecond (ultrafast heating) electric discharges, is performed. Methods for magnetoplasma control of the configuration and gas-dynamic characteristics of shock waves arising in front of promising and advanced aircraft (AA) are described. Approaches to the control of quasi-stationary separated flows, laminar–turbulent transitions, and static and dynamic separation of the boundary layer (for large PA angles of attack) are presented. Full article

In this work, a jet of cold plasma is generated in a device supplied in helium and powered with a high-voltage nanopulse power supply, hence generating guided streamers. We focus on the interaction between these guided streamers and two targets placed in a series: a metal mesh target (MM) at floating potential followed by a metal plate target (MP) grounded by a 1500 Ω resistor. We demonstrate that such an experimental setup allows to shift from a physics of streamer repeatability to a physics of streamer self-organization, i.e., from the repetition of guided streamers that exhibit fixed spatiotemporal constants to the emergence of self-organized guided streamers, each of which is generated on the rising edge of a high-voltage pulse. Up to five positive guided streamers can be self-organized one after the other, all distinct in space and time. While self-organization occurs in the capillary and up to the MM target, we also demonstrate the existence of transient emissive phenomena in the inter-target region, especially a filamentary discharge whose generation is directly correlated with complexity order Ω. The mechanisms of the self-organized guided streamers are deciphered by correlating their optical and electrical properties measured by fast ICCD camera and current-voltage probes, respectively. For the sake of clarity, special attention is paid to the case where three self-organized guided streamers (α, β and γ) propagate at v_α = 75.7 km·s^–1, v_β = 66.5 km·s^–1 and v_γ = 58.2 km·s^–1), before being accelerated in the vicinity of the MM target. Full article

We report on the development of a compact, gas-filled capillary plasma source for plasma accelerator applications. The one-body sapphire capillary was created through a diamond machining technique, which enabled a straightforward and efficient manufacturing process. The effectiveness of the capillary as a plasma acceleration source was investigated through laser wakefield acceleration experiments with a helium-filled gas cell, resulting in the production of stable electron beams of 200 MeV. Discharge capillary plasma was generated using a pulsed, high-voltage system for potential use as an active plasma lens. A peak current of 140 A, corresponding to a focusing gradient of 97 T/m, was observed at a voltage of 10 kV. These results demonstrate the potential utility of the developed capillary plasma source in plasma accelerator research using electron beams from a photocathode gun. Full article

Towards the next generation of compact plasma-based accelerators, useful in several fields, such as basic research, medicine and industrial applications, a great effort is required to control the plasma creation, the necessity of producing a time-jitter free channel, and its stability namely uniformity and reproducibility. In this Letter, we describe an experimental campaign adopting a gas-filled discharge-capillary where the plasma and its generation are stabilized by triggering its ignition with an external laser pulse or an innovative technique based on the primary dark current (DC) in the accelerating structure of a linear accelerator (LINAC). The results show an efficient stabilization of the discharge pulse and plasma density with both pre-ionizing methods turning the plasma device into a symmetrical stable accelerating environment, especially when the external voltage is lowered near the breakdown value of the gas. The development of tens of centimeter long capillaries is enabled and, in turn, longer acceleration lengths can be adopted in a wide range of plasma-based acceleration experiments. Full article

A capillary pulsed-discharge and a theta-pinch were used to record Kr spectra in the region of 330–4800 Å. A set of 168 transitions of these spectra were classified for the first time. We extended the analysis to twenty-five new energy levels belonging to 3s²3p²4d, 3s²3p²5d even configurations. We calculated weighted transition probabilities (gA) for all of the experimentally observed lines and lifetimes for new energy levels using a relativistic Hartree–Fock method, including core-polarization effects. Full article

A pulsed discharge light source was used to study the two and three times ionized argon (Ar II, Ar III) spectra in the 480–6218 Å region. A set of 129 transitions of Ar III and 112 transitions of Ar IV were classified for the first time. We extended the analysis of Ar III to five new energy levels belonging to 3s²3p³4d, 3s²3p³5s odd configurations. For Ar IV, 10 new energy levels of the 3s²3p²3d and 3s²3p²4p even and odd configurations, respectively, are presented. For the prediction of energy levels, line transitions, and transition probabilities, relativistic Hartree–Fock calculations were used. Full article

Micro-dosing of fine cohesive powders is the key technology in additive manufacturing and especially in high-potency active pharmaceutical ingredients (HPAPI). However, high accuracy micro-dosing (<5 mg) of fine cohesive powder is less trivial and still remains a challenge because it is difficult to eliminate the aggregation phenomena caused by the strong interparticle cohesive forces (in small capillaries). This paper presents a novel micro-dose method of fine cohesive powders via a pulse inertia force system. A piezoelectric actuator is used to provide a high enough pulse inertia force for a tapered glass nozzle and drive powder particles in the nozzle to be discharged from the nozzle orifice with the help of particle self-gravity. The nozzles with outlet diameters in the range of 100–2000 µm were fabricated via a glass heating process. The α-lactose monohydrate powder is used as the micro-dosing powder. The influences of the tapered nozzle outlet diameter, amplitude of the applied pulse voltage, and angle of the nozzle axis on micro-dosing mass are researched. The minimum mean dose mass is 0.6 mg for a single pulse inertia force. The coefficient of variation of dose mass, which represents the micro-dosing stability, can be controlled below 5% when the dose mass is relatively small. Full article