Skip to Content

International Journal of Turbomachinery, Propulsion and Power, Volume 8, Issue 1

2023 March - 10 articles

Cover Story: Seeking impellers of impeller-only axial fans with an optimal hub-to-tip ratio for the highest achievable total-to-static efficiency, an optimization scheme with three key components is utilized: a database created beforehand by Reynolds-averaged Navier–Stokes-predicted performance characteristics of 14,000 designs, an artificial neural network as a function of 26 geometrical parameters, and an evolutionary algorithm for optimization, performed on that metamodel. Typically, the hub-to-tip ratios for the impellers proposed by the optimization scheme are smaller than those obtained by applying the classic design rules. The shapes of the blades, which are adapted for a minimum exit loss, deviate substantially from the classic and even the state-of-the-art swept designs. View this paper
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list .
  • You may sign up for email alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.

Articles (10)

  • Article
  • Open Access
13 Citations
8,296 Views
15 Pages

The complex flow conditions in Pelton turbines make it challenging to gain detailed insight into the local flow processes. However, CFD methods offer vast potential for developing and optimising Pelton turbines due to these flow conditions. In a comp...

(This article belongs to the Special Issue Selected Turbomachinery Papers from the 18th Conference on Modelling Fluid Flow CMFF'22)
  • Feature Paper
  • Article
  • Open Access
1 Citations
3,365 Views
8 Pages

Leading Edge Bumps for Flow Control in Air-Cooled Condensers

  • Lorenzo Tieghi,
  • Giovanni Delibra,
  • Johan van der Spuy and
  • Alessandro Corsini

Air-cooled condensers (ACCs) are commonly found in power plants working with concentrated solar power or in steam power plants operated in regions with limited water availability. In ACCs, the flow of air is driven toward the heat exchangers by axial...

(This article belongs to the Special Issue Selected Turbomachinery Papers from the 18th Conference on Modelling Fluid Flow CMFF'22)
  • Article
  • Open Access
7 Citations
4,994 Views
12 Pages

In this paper, we present the design and optimization of a centrifugal fan with requirements of maximizing the total-to-static pressure rise and total-to-static efficiency at two operating points and the maximum torque provided by the motor power usi...

(This article belongs to the Special Issue Fan Noise, Aerodynamics, Applications and Systems)
  • Feature Paper
  • Article
  • Open Access
11 Citations
11,911 Views
11 Pages

This study targets determining impellers of impeller-only axial fans with an optimal hub-to-tip ratio for the highest achievable total-to-static efficiency. Differently from other studies, a holistic approach is chosen. Firstly, the complete class of...

(This article belongs to the Special Issue Fan Noise, Aerodynamics, Applications and Systems)
  • Article
  • Open Access
2 Citations
2,985 Views
25 Pages

An immersed boundary (IB) method is applied to study the effect of the blade–row gap in a low-speed single-stage compressor. The advantage of using an IB method is that the rotor/stator interface can be eliminated and, thus, the blade–row...

  • Article
  • Open Access
4 Citations
6,532 Views
26 Pages

The correct computation of flows over rough surfaces in technical systems, such as in turbomachines, is a significant issue for proper simulations of their performance data. Once the flow over rough surfaces is adequately computed in these machines,...

  • Article
  • Open Access
3 Citations
5,805 Views
9 Pages

Exergy-Based Efficiency Assessment of Fans vs. Isentropic Efficiency

  • Johannes Brötz,
  • Christian Schänzle and
  • Peter F. Pelz

The efficiency definition allows us to compare two machines with each other. In general, the efficiency is defined as the ratio of usable power to the required power. This raises the question: what is the usable power? Most engineers discuss efficien...

(This article belongs to the Special Issue Fan Noise, Aerodynamics, Applications and Systems)
  • Article
  • Open Access
9 Citations
5,188 Views
14 Pages

Data-Driven Anomaly Detection Framework for Complex Degradation Monitoring of Aero-Engine

  • Zichen Yan,
  • Jianzhong Sun,
  • Yang Yi,
  • Caiqiong Yang and
  • Jingbo Sun

Data analysis is an important part of aero engine health management. In order to complete accurate condition monitoring, it is necessary to establish more effective analysis tools. Therefore, an integrated algorithm library dedicated for engine anoma...

  • Article
  • Open Access
8 Citations
5,239 Views
17 Pages

A novel active turbulence grid of the Institute of Fluid Mechanics at FAU Erlangen-Nuremberg is introduced. The focus of this grid is not on basic investigations of fluid mechanics, as is usually the case with active turbulence grids, but the generat...

(This article belongs to the Special Issue Fan Noise, Aerodynamics, Applications and Systems)
XFacebookLinkedIn
Int. J. Turbomach. Propuls. Power - ISSN 2504-186X