January-1 2024 - 271 articles
The scattering of electromagnetic waves by isotropic dielectric cylinders can be dramatically modified by means of vanadium dioxide (VO2) thin-film coatings. Efficient dynamic control of scattering is achieved due to the variations in material parame...
This paper presents the results of inspecting tensile stress-loaded GFRP (glass fiber-reinforced polymer) samples using the Magnetic Recording Method (MRM). The MRM can be utilized solely to examine ferromagnetic materials. The modification was propo...
The objective of this study was to compare the selected mechanical properties of epoxy compounds based on an unmodified epoxy resin with those containing an antiseptic as a modifying agent. Experiments were carried out on twelve epoxy compounds made...
To tackle carbon emissions from cement production and address the decline in concrete’s mechanical properties due to the substitution of cement with solid waste (glass powder) and natural mineral admixture (zeolite powder) materials, we employe...
In this paper, the fatigue crack growth rates of typical pressure vessel material 4130X under different corrosion conditions are investigated, and the effects of corrosion modes and loading frequency on the fatigue crack growth rate of 4130X are disc...
The mechanical properties of a defect-free laser melting (PBF-LB) deposit of an AISI 316L steel alloy were assessed by means of an instrumented indentation test (IIT), at both the macro- and nano-scales. The inherent non-equilibrium microstructure of...
Utilizing neodymium-based butadiene rubber as a baseline, this study examines the effect of eco-friendly aromatic TDAE oil, fillers, and crosslinking reactions on neodymium-based rare-earth butadiene rubber (Nd-BR) crystallization behavior. The findi...
In a classic paper of 1960, W. H. Cherry and J. I. Gittleman discussed various thermal and electrodynamic aspects of the superconductive transition process relevant to practical applications. In a section of the paper that has remained unnoticed, the...
The mechanical properties and failure modes of concrete are controlled by its mesoscopic material composition and structure; therefore, it is necessary to study the deterioration characteristics of tunnel lining concrete under fire from a mesoscopic...
The objective of this study is to formulate vegetated light porous concrete (VLPC) through the utilization of various cementing materials, the design of porosity, and the incorporation of mineral additives. Subsequently, the study aims to assess and...
of 28
Get Alerted
Add your email address to receive forthcoming issues of this journal.
