In two-stage single-phase inverters, inherent double line frequency ripple is present at both the input and output of the front-end converter. Generally, large electrolytic capacitors are used to eliminate this double line frequency ripple. It is wel...
The second-order ripple power of single-phase converter causes second-order ripple voltages on the DC bus. For eliminating second-order ripple components, passive power decoupling methods including DC bus electrolytic capacitors have some shortcoming...
In single phase DC-AC systems, double-line-frequency power ripple appears at the DC side inherently. Normally a large electrolytic capacitor can be used to reduce the power ripple at the DC side. But there are several problems with this method as it...
Active power decoupling (APD) technology demonstrates significant advantages in addressing the mismatched second-order ripple power issue in single-phase rectifiers. However, conventional methods typically require additional voltage or current sensor...
In this paper, a DC–single-phase AC power converter with an LLC resonant converter is presented for a photovoltaic (PV) micro-inverter application. This application requires the leakage current suppression capability. Therefore, an isolated pow...
Single-phase current source (SCS) converters typically necessitate a bulky inductor to mitigate DC current fluctuations. Furthermore, open circuit conditions must be avoided in these systems. Active power decoupling (APD) offers an effective solution...
This article proposes a high-efficiency isolated three-port resonant converter for DC microgrids, combining a dual active bridge (DAB)–LLC topology with hybrid Pulse Width Modulat-Pulse Frequency Modulation (PWM-PFM) phase shift control. Specif...
Compared with isolated converters, transformerless converters are a preferred choice in low-voltage grids due to their efficiency and lower cost. However, leakage current and common mode (CM) voltage appear through the converter and ground in hybrid...