19 Results Found

For the first time, the kinetics of isothermal curing and thermal degradation of polyethylene glycol maleate (pEGM)–based systems and their composites with mineral fillers were investigated in the presence of a benzoyl peroxide/N,N-Dimethylanil...

An interfacial adhesion improvement between low-density polyethylene (LDPE) and aluminum (Al) foil is an important challenge in designing multilayered packaging (TetraPak packaging type) due to insufficient inherent adhesion between both untreated ma...

The wax leakage from shape-stabilized phase change materials (SSPCMs) is a limitation because it reduces their functionality. In this work, an enhancement of the compositional stability of SSPCMs formed by high-density polyethylene (HDPE) and paraffi...

In the work presented here, we explore the upcycling of polyethylene terephthalate (PET) that was derived from water bottles. The material was granulated and extruded into a filament compatible with fused filament fabrication (FFF) additive manufactu...

This study focuses on the production and characterization of biocomposites based on a thermoplastic polymer (high-density polyethylene, HDPE) and a biosourced filler (buckwheat husk, BHS) to develop more sustainable composites. Compounding was perfor...

A compatibilizer for low-density polyethylene (LDPE)/poly(ethylene terephthalate) (PET) blends was developed. This compatibilizer consists of amine-functionalized PET, which is blended with maleated polyethylene to form a copolymer. The goal is to us...

The sustainable management of multilayer paper/plastic waste is a technological challenge due to its composite nature. In this paper, a mechanical recycling approach for multilayer cartons (MC) is reported, illustrating the realization of thermoplast...

The characterization of the dielectric properties of wood–polymer composites (WPCs) is essential to understand their interaction with electromagnetic fields and evaluate their potential use for new applications. Thus, dielectric spectroscopy monitore...

The removal of rice straw extractives increases the interphase adhesion between rice straw and the high-density polyethylene (HDPE) matrix, while eradicating the inner defects of rice straw/HDPE composites. This study investigated the effect of rice...

This study investigated the influence of fiber loading and maleated polyethylene (MAPE) coupling agent on the structural, thermal, mechanical, morphological properties, and torque rheology of high-density polyethylene (HDPE) reinforced with Posidonia...

In this study, an innovative polymer blend, based on double network (DN) approach, has been developed by integrating a poly(ethylene glycol) diacrylate (PEGDA) network into a chemically modified hyaluronic acid sodium salt (HAs) hydrogel matrix. Here...

Understanding the properties and flow characteristics of recycled polyolefins in rice hull composite blends is of importance to facilitate process optimization whilst promoting sustainability. The influence of milled rice hull particle size (<0.5...

This work reports on the production and characterization of recycled high density polyethylene (R-HDPE) composites reinforced with maple fibers. The composites were produced by a simple dry-blending technique followed by compression molding. Furtherm...

With the objective of turning wastes into added-value materials, sustainable and fully recycled wood-plastic composites were reinforced by waste tire rubber particles to show balanced properties and potentially low-cost materials. Recycled high densi...

This paper presents the interfacial optimisation of wood plastic composites (WPC) based on recycled wood flour and polyethylene by employing maleated and silane coupling agents. The effect of the incorporation of the coupling agents on the variation...

Polypropylene (PP) thickened lubricating grease exhibits high oil bleed tendency at low temperatures, which makes it a promising candidate for low temperature applications. At elevated temperatures, PP thickened lubricating grease exhibits excessive...

This work investigates the feasibility of using coffee silverskin (CSS) as a reinforcing agent in biobased polyethylene (BioPE) composites, by adding it in bulk and thin film samples. The effect of two different treatments, alkali bleaching (CSS_A) a...

In immiscible polymer blend nanocomposites, nanoparticles can be localised either in polymer matrices or at the interface, invoking the simple question of how the spatial distribution of the nanoparticles and the resulting morphological changes affec...

A twin-screw extruder was used to fabricate poly(butylene succinate) (PBS)/high-density polyethylene (HDPE) blends (7:3 weight ratio) and blend-based nanocomposites. Carbon nanotubes (CNTs), graphene nanoplatelets (GNPs), and organoclays (15A and 30B...