21 Results Found

Laser-induced textures have been proven to be excellent solutions for modifying wetting, friction, biocompatibility, and optical properties of solids. The possibility to generate 2D-submicron morphologies by laser processing has been demonstrated rec...

Femtosecond laser induced changes on the topography of stainless steel with double pulses is investigated to reveal the role of parameters such as the fluence, the energy dose and the interpulse delay on the features of the produced patterns. Our res...

The direct laser synthesis of periodically nanostructured 2D transition metal dichalcogenide (2D-TMD) films, from single source precursors, is presented here. Laser synthesis of MoS2 and WS2 tracks is achieved by localized thermal dissociation of Mo...

In this work, direct irradiation by a Ti:Sapphire (100 fs) femtosecond laser beam at third harmonic (266 nm), with a moderate repetition rate (50 and 1000 Hz), was used to create regular periodic nanostructures upon polystyrene (PS) thin films. Typic...

High spatial frequency laser induced periodic surface structure (HSFL) morphology induced by femtosecond laser with 230 fs pulse duration, 250 kHz repetition rate at 1030 nm wavelength on CVD diamond surface is investigated and discussed. The spatial...

Laser-induced periodic surface structures (LIPSS) is the sub-wavelength periodic nanostructure, which is generally generated by the femtosecond laser. There are two kinds of LIPSS, low spatial frequency LIPSS (LSFL) and high spatial LIPSS (HSFL), and...

Ultrashort pulse lasers have significant advantages over conventional continuous wave and long pulse lasers for the texturing of metallic surfaces, especially for nanoscale surface structure patterning. Furthermore, ultrafast laser beam polarization...

Laser-induced periodic surface structures (LIPSS) are used for the precision surface treatment of 3D components. However, with LIPSS, the non-normal incident angle between the irradiated laser beam and the specimen surface occurs. This study investig...

The use of ultra-short pulse lasers in the kW range, combined with an appropriate beam engineering approach, enables the achievement of high-throughput production of laser-functionalised surfaces. However, the manufacturing of complex parts still fac...

The formation and properties of laser-induced periodic surface structures (LIPSS) were investigated upon fs-laser irradiation of fused silica at different initial substrate temperatures, TS. For substrate heating between room temperature, TRT, and TS...

In this study, we report on the alignment properties of nematic liquid crystals on various transparent structured sapphire layers formed by laser-induced periodic surface structures (LIPSS). One-dimensional LIPSS (1D-LSFL) are generated by infrared f...

2D Ti-Fe multilayer preparation has been attracting increased interest due to its ability to form intermetallic compounds between metallic titanium and metallic iron thin layers. In particular, the TiFe compound can absorb hydrogen gas at room temper...

In this work, we study the characteristics of femtosecond-filament-laser–matter interactions and laser-induced periodic surface structures (LIPSS) at a beam-propagation distance up to 55 m. The quantification of the periodicity of filament-indu...

The “shuttle effect” caused by the shuttling of soluble long-chain polysulfides between the anode and cathode electrodes has persistently hindered lithium–sulfur batteries (LSBs) from achieving stable and high-capacity performance....

We report on the generation of low spatial frequency laser-induced periodic surface structures along straight lines on fused silica by spatially scanning the laser parallel to its polarization direction. The influence of the applied laser fluence and...

Surface textures such as laser-induced periodic surface structures (LIPSS) are of great interest to obtain industrial nanopatterns. In this work, plain uncoated 1.2344 steel with and without Chromium Nitride (CrN) and CrN plus diamond-like carbon (DL...

Although lithium-sulfur (Li-S) batteries are one of the promising candidates for next-generation energy storage, their practical implementation is limited by rapid capacity fading due to lithium polysulfide (LiPSs) formation and the low electronic co...

In this work, the technique of Direct Laser Interference Patterning (DLIP) was used to fabricate micrometric structures at the surface of Cobalt-Chromium-Molybdenum and AZ91D magnesium alloys. Line-like patterns with spatial periods of 5 μm were t...

The advantages of high energy density and low cost make lithium–sulfur batteries one of the most promising candidates for next-generation energy storage systems. However, the electrical insulativity of sulfur and the serious shuttle effect of l...

The use of aluminum alloy AA2024-T4 (Russian designation D16T) in applications requiring a high strength-to-weight ratio and fatigue resistance such as aircraft fuselage often demands the control and modification of surface properties. A promising ro...

Lithium–sulfur batteries (LSBs) are favorable candidates for advanced energy storage, boasting a remarkable theoretical energy density of 2600 Wh kg−1. Moreover, several challenges hinder their practical implementation, including sulfur&r...