Materials

Mechanics of Geomaterials: Multi-Scale Modeling from Micro to Macro

edited by

submission deadline 10 Jan 2027 | Viewed by 229 | Submission Open

Keywords: multi-scale modeling; geomaterials; micromechanics; constitutive modeling; damage mechanics; fracture mechanics

(This special issue belongs to the Section Mechanics of Materials)

Intelligent Welding and Advanced Perception Technology for High-Performance Materials

edited by Ting Lei

submission deadline 10 Jan 2027 | Viewed by 224 | Submission Open

Keywords: intelligent welding; advanced perception technology; weld seam tracking; robot trajectory planning; AI-driven signal processing; weld formation mechanisms; defect suppression strategies; high-performance materials

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advances in Joining and Surface Engineering for Lightweight Multi-Material Structures

edited by

Piotr Lacki

and

Judyta Niemiro-Maźniak

submission deadline 10 Jan 2027 | Viewed by 126 | Submission Open

Keywords: multi-material structures; dissimilar joining; surface engineering; lightweight design; interface properties; adhesive bonding; laser texturing

(This special issue belongs to the Section Manufacturing Processes and Systems)

Sustainable Construction and Building Materials: Microstructure, Mechanical Performance, and Long-Term Durability

edited by Caifeng Lu, Guanglin Yuan and Qingsong Zhou

submission deadline 20 Jan 2027 | 12 articles | Viewed by 18182 | Submission Open

Keywords: sustainable materials; reinforcement and repair; microstructure; mechanical performance; long-term durability; cement-based composites; geopolymer materials; environmental impact; circular economy; life cycle assessment (LCA)

(This special issue belongs to the Section Construction and Building Materials)

Environmental Breakthroughs: Advanced Research on New Materials of Depollution Strategies for Water, Soil, Air, and Noise Pollution

edited by

Diana-Carmen Mirila

,

Emilian Florin Moşneguţu

,

Claudia Tomozei

and

Ana Maria Rosu

submission deadline 20 Jan 2027 | 7 articles | Viewed by 11563 | Submission Open

Keywords: depollution; water; soil; air; noise; materials; pollutants; remediation; sustainable; innovation

(This special issue belongs to the Section Green Materials)

Carbonaceous Materials: Fabrication, Characterization and Applications—Second Edition

edited by

Iwona Zawierucha

and

Grzegorz Malina

submission deadline 20 Jan 2027 | 10 articles | Viewed by 9517 | Submission Open

Keywords: biochar; carbon nanotubes; graphene; fullerene; activated carbon; cyclodextrin polymers; composites and hybrids; water and wastewater treatment; various applications of carbonaceous materials

(This special issue belongs to the Section Carbon Materials)

Structural, Physical and Mechanical Properties of Reinforced Concrete, Novel Cementitious Composites and Other Brittle Construction Materials

edited by

Grzegorz Ludwik Golewski

submission deadline 20 Jan 2027 | 10 articles | Viewed by 8975 | Submission Open

Keywords: concrete composite; concrete structures; materials with brittle matrixes; material modification; microstructure; experimental testing; fracture toughness; crack; interfacial transition zone (ITZ); modeling

(This special issue belongs to the Section Construction and Building Materials)

The Development of Sustainable Concrete with Solid Waste and By-Products (Second Edition)

edited by

Ina Pundienė

and Jolanta Pranckevičienė

submission deadline 20 Jan 2027 | 11 articles | Viewed by 8495 | Submission Open

Keywords: cement based materials; alkali-activated materials; organic and inorganic waste; ceramic materials; admixture; nanomaterials; durability; material characterization

(This special issue belongs to the Section Construction and Building Materials)

New Thermal Insulation Materials in Green Buildings

edited by

Jitka Peterková

and

Jiří Zach

submission deadline 20 Jan 2027 | 5 articles | Viewed by 7855 | Submission Open

Keywords: insulation materials based on easy renewable resources; natural fibres; waste fibres; vacuum insulation materials; ecological materials; recycling; LCA; green buildings

(This special issue belongs to the Section Construction and Building Materials)

Advanced Welding Process Development for Metals and Steels: Numerical Analysis, Process Optimization, and Joint Performance

edited by

Lin Wang

and Tianqing Li

submission deadline 20 Jan 2027 | 7 articles | Viewed by 7826 | Submission Open

Keywords: laser welding; arc welding; modeling; weld; joint performance

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advances in Ferroelectric and Piezoelectric Materials

edited by

John G. Fisher

submission deadline 20 Jan 2027 | 3 articles | Viewed by 7046 | Submission Open

Keywords: piezoelectric; ferroelectric; microstructure; domain engineering; sintering; multilayer; energy storage

(This special issue belongs to the Section Electronic Materials)

The Parameters of Advanced Materials

edited by

Grzegorz Tytko

,

Zhiyuan Xu

, Jolanta Makowska and

Mingyang Lu

submission deadline 20 Jan 2027 | 3 articles | Viewed by 6458 | Submission Open

Keywords: structure; physical parameters; chemical parameters; mechanical parameters; thermal parameters; electrical parameters; magnetic parameters; crystal structure

(This special issue belongs to the Section Advanced Materials Characterization)

Effect of Additives/Admixtures on the Properties of Concretes and Cementitious Composites—Second Edition

edited by Mengjun Chen and Jiwen Bai

submission deadline 20 Jan 2027 | 5 articles | Viewed by 6304 | Submission Open

Keywords: concrete admixtures; chemical admixture; cement hydration; cementitious materials; solid waste utilization; property modulation

(This special issue belongs to the Section Construction and Building Materials)

The Additive Manufacturing of Metallic Alloys (Second Edition)

edited by

Longqing Chen

,

Sheng Cao

and

Wenbin Qiu

submission deadline 20 Jan 2027 | 3 articles | Viewed by 6271 | Submission Open

Keywords: additive manufacturing; 3D printing; powder bed fusion; directed energy deposition; post-processing; microstructure; anisotropy; columnar grain; non-equilibrium solidification; modeling and simulation

(This special issue belongs to the Section Metals and Alloys)

Advances in Laser Processing Technology of Materials—Second Edition

edited by

Annalisa Volpe

and

Raffaele De Palo

submission deadline 20 Jan 2027 | 5 articles | Viewed by 6151 | Submission Open

Keywords: laser material processing; simulation of laser material processing; laser–matter interaction; laser manufacturing; laser welding; laser ablation; laser micro and nano-machining; metamaterials laser fabrication; ultrashort laser pulses

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advances in Rock and Mineral Materials—Second Edition

edited by

Gorazd Žibret

,

Vilma Ducman

and

Lea Žibret

submission deadline 20 Jan 2027 | 4 articles | Viewed by 4727 | Submission Open

Keywords: primary and secondary mineral raw materials; engineered materials; life cycle analysis; construction; disposal; recycling

(This special issue belongs to the Section Construction and Building Materials)

Properties, Processing and Applications of Diamond and Related Superhard Materials

edited by Jie Gao and Shengwang Yu

submission deadline 20 Jan 2027 | 2 articles | Viewed by 4445 | Submission Open

Keywords: diamond and related superhard materials; properties of diamond; processing of diamond; polishing; etching; application of diamond; growth of diamond; nucleation of diamond; low temperature growth; heteroepitaxial single crystal; diamond coating on WC-Co; diamond coating on GaN; diamond coating on Ga2O3

(This special issue belongs to the Section Materials Physics)

Advances in Machine Learning for the Prediction of Construction Materials Properties

edited by

Waleed Abdelaziz Zeiada

and

Ali Alnaqbi

submission deadline 20 Jan 2027 | 4 articles | Viewed by 4391 | Submission Open

Keywords: machine learning, deep learning, and hybrid models; construction materials; material properties prediction; data-driven modeling; soils and unbound aggregates; cementitious composites; asphalt binders and mixtures

(This special issue belongs to the Section Materials Simulation and Design)

Advances in Resilient, Sustainable, and Functional Materials for Road Infrastructure

edited by

Xueyan Liu

,

Shi Xu

, Yangming Gao,

Jizhe Zhang

, Yi Li and Sayeda Nowrozon Nahar

submission deadline 20 Jan 2027 | 4 articles | Viewed by 4382 | Submission Open

Keywords: resilient infrastructure; sustainable road materials; functional pavement; self-healing asphalt; circular economy; lifecycle assessment; recycled materials in pavements; climate-adaptive design

(This special issue belongs to the Section Construction and Building Materials)

Advancements in Polymer Composite Materials: Reinforcement, Nano-Engineering, and Sustainable Manufacturing Techniques

edited by Sakrit Hait,

Miroslav Slouf

and

Chungfu Cheng

submission deadline 20 Jan 2027 | 3 articles | Viewed by 4254 | Submission Open

Keywords: functional polymer composite; polymer nanocomposite; high-toughness polymer; high-modulus polymer; bio-based microparticles and nanoparticles; reinforcement; polymer recycling; sustainable manufacturing; structure-property relationships; macro-, micro-, and nanomechanical properties; solid-state processing

(This special issue belongs to the Section Polymeric Materials)

Microstructural, Mechanical, and Durability Characteristics of Cementitious Materials (3rd Edition)

edited by

Ruizhe Si

and

Shuaicheng Guo

submission deadline 20 Jan 2027 | 4 articles | Viewed by 4036 | Submission Open

Keywords: cementitious materials; mechanical properties; durability; microstructure; advanced materials characterization; numerical simulations; experimental findings

(This special issue belongs to the Section Construction and Building Materials)

Advances in Sustainable Construction and Building Materials (4th Edition)

edited by

Ru Ji

and

Fanghui Han

submission deadline 20 Jan 2027 | 8 articles | Viewed by 3953 | Submission Open

Keywords: construction and building materials; sustainable development; energy saving; energy efficiency; waste utilization; synthesis and preparation; characterization and properties; application

(This special issue belongs to the Section Construction and Building Materials)

Materials Science Advancements Through Density Functional Theory

edited by

Agnieszka Kącka-Zych

and

Luis R. Domingo

submission deadline 20 Jan 2027 | 3 articles | Viewed by 3952 | Submission Open

Keywords: density functional theory; molecular electron density theory; organic synthesis; bioactive compounds; electronic structure; docking survey; reaction mechanism

(This special issue belongs to the Section Materials Simulation and Design)

Advances in Plasma and Laser Engineering (Third Edition)

edited by

Mariusz Jasinski

submission deadline 20 Jan 2027 | 6 articles | Viewed by 3851 | Submission Open

Keywords: plasma deposition; laser deposition; plasma treatment of materials; laser treatment of materials; plasma activation of surfaces; laser activation of surfaces; pulsed plasmas; pulsed lasers; new materials; plasma sources; laser sources; plasma engineering; laser engineering

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advances in Lightweight Alloys: Microstructure, Mechanical Properties and Applications

edited by Zhirou Zhang

submission deadline 20 Jan 2027 | 5 articles | Viewed by 3832 | Submission Open

Keywords: lightweight alloys; aluminum alloys; magnesium alloys; titanium alloys; additive manufacturing; microstructural characterization; mechanical properties; deformation mechanisms; environmental durability

(This special issue belongs to the Section Metals and Alloys)

Advanced Abrasive Processing Technology and Applications (Second Edition)

edited by Yufei Gao

submission deadline 20 Jan 2027 | 3 articles | Viewed by 3780 | Submission Open

Keywords: precision/ultra-precision abrasive machining; sawing; grinding; lapping; material removal mechanism; machined surface integrity; difficult-to-machine materials; processing damage; processing monitoring

(This special issue belongs to the Section Manufacturing Processes and Systems)

Sustainable Eco-Friendly Advanced Geopolymers: Leveraging Recycled, Bio-Based, and Industrial Waste Constituents

edited by

Katarzyna Łoś

and

Barbara Kozub

submission deadline 20 Jan 2027 | 2 articles | Viewed by 3658 | Submission Open

Keywords: sustainable composites; green construction materials; bio-based composites; natural fiber-reinforced materials; geopolymer composites; alkali-activated materials; recycled materials; waste-based fillers and reinforcements; eco-friendly infrastructure; circular economy in construction; low-carbon construction technologies; life cycle assessment (LCA); durability of sustainable materials; sustainable infrastructure solutions

(This special issue belongs to the Section Green Materials)

Research on Properties of Polymers and Their Engineering Applications—2nd Edition

edited by

Miaomiao Hu

and

Jintang Guo

submission deadline 20 Jan 2027 | 3 articles | Viewed by 3477 | Submission Open

Keywords: polymer; polymerization; anti-corrosion; cementing engineering; drilling; construction materials; disinfection; sterilization; sewage treatment

(This special issue belongs to the Section Polymeric Materials)

Advanced Composite Materials for Next-Generation Electronic Devices

edited by

Yang Shi

, Junjie Ye and

Yongkun Wang

submission deadline 20 Jan 2027 | 4 articles | Viewed by 3453 | Submission Open

Keywords: ME materials; electronic packaging devices; numerical simulation; topology optimization; reliability analysis

(This special issue belongs to the Section Electronic Materials)

Advances in Silicon Carbide (SiC) and Related Materials: Structure Design, Fabrication and Application

edited by

Chong Wei

, Bin Liang and Marcin Chmielewski

submission deadline 20 Jan 2027 | 3 articles | Viewed by 3402 | Submission Open

Keywords: SiC materials; SiC-based composites; extreme environment performance; multi-scale structural design; fabrication technology; nuclear applications; electronic devices

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Advances in Superconducting Materials: From Structure and Properties to Applications

edited by

Donghui Liu

,

Hongye Zhang

and Baoqiang Zhang

submission deadline 20 Jan 2027 | 3 articles | Viewed by 3296 | Submission Open

Keywords: superconducting materials; microstructural characterization and analysis; pinning properties and vortex dynamics; additive manufacturing; superconducting thin films, conductors, cables, and magnets; multi-physics characterization; simulation and modelling approaches; quench detection and protection

(This special issue belongs to the Section Quantum Materials)

Processing and Microstructure Design of Advanced Ceramics

edited by

Bo Ren

and Haiyang Chen

submission deadline 20 Jan 2027 | 2 articles | Viewed by 3228 | Submission Open

Keywords: ceramics; engineering application; microstructure; mechanical properties; thermal properties

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Numerical Methods and Modeling Applied for Composite Structures, Second Edition

edited by

Pawel Wysmulski

,

Katarzyna Falkowicz

and

Patryk Rozylo

submission deadline 20 Jan 2027 | 4 articles | Viewed by 3188 | Submission Open

Keywords: laminates; CFRP; GFRP; buckling; stability; failure; crack damage; finite element method; numerical method

(This special issue belongs to the Section Materials Simulation and Design)

Experimental Testing and Numerical Modelling for Structural Dynamics

edited by

Chao Xu

and Zexing Yu

submission deadline 20 Jan 2027 | 4 articles | Viewed by 2944 | Submission Open

Keywords: experimental techniques; computational methods; nonlinear structural dynamics; stochastic dynamics and uncertain systems; dynamic model validation; vibration control; smart materials and structures; dynamic sensors and actuators; energy harvesting; structural health monitoring; load identification and monitoring; dynamics of jointed structures

(This special issue belongs to the Section Materials Simulation and Design)

Advanced Materials for Electrical Engineering: Fabrication, Testing and Applications

edited by Minxia Shi and

Xutao Han

submission deadline 20 Jan 2027 | 3 articles | Viewed by 2877 | Submission Open

Keywords: piezoelectric ceramics; insulating paper; insulating oil; ferromagnetic materials; material performance testing

(This special issue belongs to the Section Electronic Materials)

Advanced Technologies and Materials for Wastewater Treatment

edited by

Ildikó Lung

and

Adina Stegarescu

submission deadline 20 Jan 2027 | 2 articles | Viewed by 2646 | Submission Open

Keywords: materials; functionalized materials; adsorbents; surface modifications; membrane; emerging contaminants; wastewater treatment; photocatalysis; adsorption

(This special issue belongs to the Section Porous Materials)

Fatigue Behavior, Fracture and Optimization of Alloys and Composites

edited by

Guangwu Fang

and Huiqun Liu

submission deadline 20 Jan 2027 | 4 articles | Viewed by 2568 | Submission Open

Keywords: composites and alloys; fatigue behavior; fracture mechanics; damage tolerance; multi-scale modeling; optimization; additive manufacturing; durability; finite element analysis; machine learning

(This special issue belongs to the Section Mechanics of Materials)

Advances in Low-Carbon and Zero-Carbon Metallurgical Technologies

edited by

Kezhou Song

and

Ying-De Huang

submission deadline 20 Jan 2027 | 5 articles | Viewed by 2348 | Submission Open

Keywords: preparation of metal alloy; hydrogen metallurgy; secondary resource recycling; metallurgy of materials; metallurgical electrochemistry; bio-leaching and bio-recovery; optimization of transportation; novel reactor design; LCA and techno-economic analysis; advanced materials for harsh environments

(This special issue belongs to the Section Manufacturing Processes and Systems)

Functional Laser Materials

edited by

Baitao Zhang

and Shande Liu

submission deadline 20 Jan 2027 | 4 articles | Viewed by 2161 | Submission Open

Keywords: novel laser crystals; novel nonlinear crystals; novel semiconductor materials; nanocrystals and applications; mid-infrared lasers; ultrafast lasers; novel optoelectronic materials and devices; optoelectronic properties of low-dimensional materials; optical modulation and switch; optical sensing and detecting

(This special issue belongs to the Section Optical and Photonic Materials)

Advanced Materials for Energy and Catalytic Applications

edited by

Zhifeng Wang

and

Xijun Liu

submission deadline 20 Jan 2027 | 3 articles | Viewed by 2159 | Submission Open

Keywords: electrode materials; battery; catalytic materials; energy storage and conversion; material simulation and calculation; water splitting; pollutant degradation

(This special issue belongs to the Section Energy Materials)

Advanced Coatings and Films for Corrosion Resistance and Surface Engineering of Light Metal Alloys

edited by

Takahiro Ishizaki

submission deadline 20 Jan 2027 | 3 articles | Viewed by 1938 | Submission Open

Keywords: light metal; surface modification; thin film; corrosion and corrosion protection; coating; microstructure

(This special issue belongs to the Section Thin Films and Interfaces)

Corrosion Mitigation and Protection of Metals and Alloys

edited by

Nadia Arrousse

submission deadline 20 Jan 2027 | 2 articles | Viewed by 1866 | Submission Open

Keywords: corrosion; corrosion inhibition; green inhibitors; electrochemical studies; DFT; Monte Carlo simulation; dynamic simulation; surface analysis

(This special issue belongs to the Section Corrosion)

Structure and Mechanical Properties of Composite Materials

edited by

Zhefeng Yu

and Wu Xu

submission deadline 20 Jan 2027 | 2 articles | Viewed by 1734 | Submission Open

Keywords: composite materials; mechanical properties; failure analysis; fatigue; impact resistance; buckling; lightweight structures; multiscale modeling; optimization design; AI-driven design

(This special issue belongs to the Section Mechanics of Materials)

Research on Friction, Wear and Corrosion Properties of Materials (2nd Edition)

edited by

Yunhai Ma

,

Jiyu Sun

and Yucheng Liu

submission deadline 20 Jan 2027 | 3 articles | Viewed by 1723 | Submission Open

Keywords: friction materials; heterogeneous structural materials; resistance and wear reduction; material bionics; friction properties; wear properties; corrosion properties; flame spraying

(This special issue belongs to the Section Mechanics of Materials)

Sustainable Mineral Processing and Metallurgy: Intensity Reduction and Resource Recovery

edited by

Xinbo Yang

,

Wencai Zhang

and

Qingqing Huang

submission deadline 20 Jan 2027 | 2 articles | Viewed by 1722 | Submission Open

Keywords: mineral processing; extractive metallurgy; process chemistry; resource recovery; energy efficiency; water efficiency; process innovation; innovative materials

(This special issue belongs to the Section Manufacturing Processes and Systems)

Sodium-Ion Batteries: From Electrodes, Electrolytes to High-Performance Devices

edited by Huangxu Li and

Jingqiang Zheng

submission deadline 20 Jan 2027 | 2 articles | Viewed by 1699 | Submission Open

Keywords: high-capacity cathodes; anode-free; sodium-metal anode; characterization techniques; electrolytes; structure regulations; kinetics

(This special issue belongs to the Section Energy Materials)

Advanced Biomaterial Characterization Techniques: Spectroscopy and Electron Microscopy Analysis

edited by

Inga Morkvenaite-Vilkonciene

submission deadline 20 Jan 2027 | 2 articles | Viewed by 1688 | Submission Open

Keywords: biomaterials; spectroscopy; electron microscopy; SEM; TEM; surface characterization; nanoscale imaging; correlative analysis; biointerfaces; materials–biology interactions

(This special issue belongs to the Section Advanced Materials Characterization)

Artificial Intelligence in the Design and Innovation of High-Performance Concrete Materials

edited by

Chuanqi Li

and

Xiancheng Mei

submission deadline 20 Jan 2027 | 2 articles | Viewed by 1600 | Submission Open

Keywords: artificial intelligence; high-performance concrete; material design; machine learning; data analysis; optimization algorithms; sustainability; intelligent production

(This special issue belongs to the Section Materials Simulation and Design)

Use of Modern Materials in Technological Processes Accompanied by Frictional Heating (3rd Edition)

edited by

Aleksander Yevtushenko

and

Katarzyna Topczewska

submission deadline 20 Jan 2027 | 2 articles | Viewed by 1565 | Submission Open

Keywords: frictional heating; braking, grinding, welding, cutting, drilling, etc.; temperature and thermal stresses; experimental methods and simulations; materials selection; thermal barrier coating

(This special issue belongs to the Section Manufacturing Processes and Systems)

Flexible Ferroelectric Electronic Materials and Devices: Challenges and Opportunities

edited by

Mingyu Sang

submission deadline 20 Jan 2027 | 2 articles | Viewed by 1541 | Submission Open

Keywords: flexible electronic materials; ferroelectric thin films; ferroelectric polymers; dielectric and piezoelectric properties; domain dynamics in ferroelectrics; low-temperature processed devices; solution-processable ferroelectrics; mechanical flexibility and reliability of flexible electronics; interface engineering in ferroelectric devices

(This special issue belongs to the Section Electronic Materials)

Journal Menu

Journal Browser

Special Issues

Further Information

Guidelines

MDPI Initiatives

Follow MDPI