Ceramics, Volume 4, Issue 1

This work reports the progress in the preparation of superconducting and thermoelectric lamellar compounds processed by the unconventional Spark Plasma Sintering (SPS). The SPS equipment was modified with the aim of obtaining the textured and dense s...

The striking feature of X-ray diffraction pattern of vitreous silica is that the center of its intense but broad ring is located at nearly the same position as the strongest diffraction ring of β-cristobalite. Two fundamentally different explanations...

The need for sustainable solutions to reduce the carbon footprint of the ceramics and glass industry leads towards the development of new electric current-assisted technologies. Flash sintering-like processes in glasses allow a reduction of the softe...

High strength transparent Y₂O₃ ceramics were fabricated from commercial powders using spark plasma sintering (SPS) technique by optimizing the heating rate. The heating rate significantly influenced the microstructures and the optical/mechanical prop...

Peer review is the driving force of journal development, and reviewers are gatekeepers who ensure that Ceramics maintains its standards for the high quality of its published papers [...]

Al₂O₃ + 30 vol% ZrO₂ matrix composites with 20 and 30 vol% cBN have been prepared with the optimized processing route, using spark plasma sintering (SPS) at temperatures of 1400 °C and 1250 °C. The influence of cBN addition on the microstruct...

Spark plasma sintering (SPS) has gained recognition in the last 20 years for its rapid densification of hard-to-sinter conventional and advanced materials, including metals, ceramics, polymers, and composites. Herein, we describe the unconventional u...

Material from the electric arc furnace smelting of municipal solid waste incineration (MSWI) bottom ash was easily converted into highly porous glass-ceramics by a combination of inorganic gel casting and sinter-crystallization at 1000 °C. In par...

The present work merges two key strategies for the manufacturing of advanced ceramics, in particular, the development of functionally graded materials (FGMs) and the addition of graphene-based fillers into a ceramic matrix. A silicon nitride/reduced...