Skip to Content

International Journal of Turbomachinery, Propulsion and Power, Volume 11, Issue 2

2026 June - 13 articles

Cover Story: Boundary Layer Ingestion propulsion can improve propulsive efficiency, but designing distortion-tolerant turbomachinery remains a challenging task. The study presents a multi-objective optimization framework to extend the operating range of transonic fan blades under BLI inlet distortion by acting on blade profiles. Quasi-2D sections are optimized using a genetic algorithm coupled with RANS simulations to maximize efficiency at design conditions and pressure ratio at near-stall conditions for different inlet Mach numbers. The resulting Pareto-optimal shapes feature precompression ramps to minimize design shock-losses and increase trailing edge deflection for maximum stall pressure ratio. Full-annulus URANS validation confirms that 3D rotors integrating these sections improve stall margins. View this paper
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list .
  • You may sign up for email alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.

Articles (13)

  • Review
  • Open Access
899 Views
24 Pages

The integration of Artificial Intelligence (AI) in turbomachinery and fan systems is transforming traditional design, diagnostics, and operational strategies. Artificial Intelligence allows for the efficient exploration of wide design space, easy and...

  • Feature Paper
  • Article
  • Open Access
1,152 Views
20 Pages

Reversible pump turbines (RPTs) play a key role in pumped hydro energy storage systems, where increasing grid flexibility requires frequent operation under off-design conditions. In turbine mode, deep partial load and no-load operation are often asso...

  • Feature Paper
  • Article
  • Open Access
764 Views
17 Pages

Two-phase flow in diffusers is often accompanied by pronounced gas accumulation caused by low-pressure regions associated with flow separation, leading to a deterioration in pressure recovery. This behavior poses a major limitation to the performance...

(This article belongs to the Special Issue Selected Papers from the Conference on Modelling Fluid Flow (CMFF’25))
  • Article
  • Open Access
1,016 Views
17 Pages

Sediment management represents a key challenge for hydropower plants, as it requires balancing river continuity preservation with the mitigation of erosion-related damage. To identify admissible sediment loads that ensure acceptable wear levels, reli...

  • Article
  • Open Access
761 Views
25 Pages

Reactive Experimental PIV Analysis of Pulsating Flow Exiting from Cyclic Deflagrative Pressure Gain Combustion

  • Panagiotis Gallis,
  • Daniela Anna Misul,
  • Bastien Boust,
  • Marc Bellenoue and
  • Simone Salvadori

In spite of the intense research interest in the integration of Pressure Gain Combustion (PGC) systems with a turbomachinery module, limited studies have been conducted regarding the experimental investigation of the strong spatio-temporal perturbati...

  • Article
  • Open Access
671 Views
14 Pages

To better understand the impact that multi-scale unsteadiness has on industrial flows, we use Large Eddy Simulation (LES) data representative of a midspan compressor section operating in an idealized multi-stage environment. We collect a large number...

  • Article
  • Open Access
1,409 Views
27 Pages

Pushing the Limits: Enhancing Turbomachinery Efficiency by Riblet Application

  • Konrad M. Hartung,
  • Stefan Mauersberger,
  • Udo Löschner and
  • Karsten Oehlert

The reduction in aerodynamic drag remains a crucial pathway for enhancing turbomachinery efficiency. Riblet structures are a well-established passive technique to reduce viscous drag, but their application has been constrained by the challenge of ada...

  • Article
  • Open Access
731 Views
20 Pages

Improving Pressure Buildup and Water Purity in a PTJ Separation Pump

  • Jessica Dafis,
  • Xuemei Zhang,
  • Katharina Zähringer and
  • Dominique Thévenin

A modified Pitot-tube jet (PTJ) separation pump combines centrifugal phase separation with pressure buildup and enables compact oil–water treatment, where a water-rich stream can be discharged at elevated pressure. This work advances an existin...

(This article belongs to the Special Issue Selected Papers from the Conference on Modelling Fluid Flow (CMFF’25))
  • Article
  • Open Access
1,042 Views
16 Pages

Fan noise from small cooling fans often contains multiple coexisting tonal components whose combined perceptual impact cannot be fully represented by conventional single-tone metrics. While the Tone-to-Noise Ratio (TNR) and Prominence Ratio (PR) defi...

(This article belongs to the Special Issue Advances in Industrial Fan Technologies)
  • Article
  • Open Access
2 Citations
1,224 Views
19 Pages

A Performance Analysis of a Fuel Cell Propulsion System with Micro Gas Turbine Under Realistic Environmental Conditions

  • Sebastian Lück,
  • Maximilian Bień,
  • Patrick Meyer,
  • Jens Friedrichs and
  • Jan Göing

A major challenge for aircraft fuel cell propulsion systems is to ensure that the air properties on the cathode side remain within a narrow, suitable envelope throughout the flight. The components must maintain almost constant temperature, pressure a...

  • Article
  • Open Access
1,246 Views
18 Pages

Boundary Layer Ingestion propulsors operate in an adverse aerodynamic environment with high levels of distortion. With the purpose of extending the operating range of transonic fan rotors for BLI applications, in this paper we present an optimisation...

  • Article
  • Open Access
2,010 Views
15 Pages

A common solution for reducing the tonal noise annoyance caused by fans is to change the circumferential blade spacing from even to uneven. However, this technique requires predictive tools to simulate and assess their acoustic performance at a lower...

(This article belongs to the Special Issue Advances in Industrial Fan Technologies)
  • Article
  • Open Access
1,754 Views
14 Pages

Transonic compressors encounter significant challenges from shock formations due to high-speed supersonic blade tips, particularly at high altitudes where lower Reynolds numbers result in laminar boundary layer separation and increased mixing losses....

XFacebookLinkedIn
Int. J. Turbomach. Propuls. Power - ISSN 2504-186X