June 2025 - 116 articles
This study employs synchrotron polychromatic X-ray microdiffraction (micro-XRD) to resolve the dynamic interplay between deformation mechanisms and stress redistribution in a commercial Mg-3Al-1Zn (AZ31) alloy under uniaxial tension. Submicron-resolu...
Laser–MIG hybrid welding–brazing was performed to join TC4 titanium alloy and 5083 aluminum alloy with ER5356, ER4043 and ER2319 filler wires. The effects of the different filler wires on the microstructural features and mechanical proper...
The influence of multiwall carbon nanotube (MWCNT) reinforcements on electrochemical corrosion investigations at varying NaCl concentrations (0.4 M, 0.6 M, 0.8 M, 1 M) of Mg-Zn-Ce nanocomposites is studied in this work. The Mg-Zn-Ce/MWCNT nanocomposi...
This paper presents a systematic analysis of the solid products formed during the cathodic decomposition of chalcopyrite using the acetic acid system. The reduction of chalcopyrite was assessed using different electrochemical and surface characteriza...
Electron beam melting (EBM) technology has gained prominence owing to its ability to enhance production efficiency and meet green manufacturing standards. However, overhang structures are a significant issue for additive manufacturing due to their ne...
The corrosion behaviors of newly developed solder alloys with excellent mechanical properties, Sn-2.5 Ag-1.0 Bi-0.8 Cu-0.05 Ni (SABC25108N) and Sn-1.5 Bi-0.75 Cu-0.065 Ni (SBC15075N), are analyzed to supplement the corrosion behavior of the limited c...
This study investigates the influence of specific surface area (SSA) and aluminum hydroxide particle size on sodium aluminate’s purification efficiency in the Bayer process. This research examines how variations in SSA affect the adsorption and...
As a critical impurity in the production of solar-grade silicon, the concentration of phosphorus (P) significantly affects photoelectric conversion efficiency. To address the challenge of P removal in solar-grade silicon production, this study propos...
The microstructural evolution and mechanical properties of WWER 440 steam generator steel GOST 22K after long-term operation were thoroughly examined in this study. The samples were taken directly from a steam generator using the small punch test met...
The present research proposes an Artificial Neural Network (ANN) model to predict the critical buckling load of six different types of metallic aerospace grid-stiffened panels: isogrid type I, isogrid type II, bi-grid, X-grid, anisogrid, and waffle,...
of 12
Get Alerted
Add your email address to receive forthcoming issues of this journal.
