Reviewer Board (480)

Members of the reviewer board are selected from all Metals reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.

Dr. Iman Abdallah
Department of Engineering Physics, University of Wisconsin-Madison, Madison, WI 53706, USA
Interests: materials science; Thin Films; sputtering; High Temperature Oxidation; stainless steels; Fib; sem; TEM; eds; EBSD; eels; ASTAR
Dr. Shinichiro Adachi
Research Division of Metal Finishing and Analysis, Osaka Research Institute of Industrial Science and Technology,Ayumino 2-7-1, Izumi 594-1157, Japan
Interests: thermal spraying; cold spraying; plasma nitriding; plasma carburizing; Laser Cladding; Microstructure; wear; corrosion
Dr. Eltefat Ahmadi
1. École Polytechnique de Montréal, Université de Montréal, Montréal, QC, Canada
2. Former JSPS Postdoctoral Fellow at Division of Materials Science and Engineering, Hokkaido University, Sapporo, Japan
Interests: molten salt electrolysis; metallurgy; Pyrometallurgy; electrometallurgy; extractive metallurgy; non-ferrous metallurgy; Rare Earth Elements; precious metals; iron & Steel Making; ferroalloys; nanomaterials & energy storage materials
Prof. Dr. Hesham M. Ahmed
Department of Civil, Environmental and Natural Resources Engineering, Minerals and Metallurgical Engineering, MiMeR, Luleå University of Technology, 97187 Luleå, Sweden
Interests: Iron ore; production of intermetallics from their corresponding oxide mixtures; reduction kinetics; recycling of integrated steel in- plant fines
Prof. Dr. Yong-Sik Ahn
Dept. of Materials Sci. & Eng., Pukyong National University, 45 Yongso-ro, Nam-gu, Busan 48513, Korea
Interests: Mechanical property, Plastic forming, steel production process
Dr. Juan Ignacio Ahuir-Torres
General Engineering Research Institute, Faculty Engineering and Technology, Liverpool John Moores University, GERI Building, 3 Byrom Street, Liverpool L3 3AF, UK
Interests: laser processing; corrosion; metallurgy; Electrochemistry; Mechanical Testing
Dr. Khaled Alaluss
Steinbeis Innovation Center Intelligent Functional Materials, Welding and Joining Techniques, Implementation, Manfred-von-Ardenne-Ring 20, 01099 Dresden, Germany
Interests: joining process technology; Material Development; Coating technology; Additive Manufacturing; process technology development and automation; simulation of joining processes and component properties; development of joining hardware and device technology
Prof. Dr. Skotnikova Margarita Alexandrovna
International scientifically-educational Center "BaltTribo-Polytechnic" of “Institute of mechanical engineering, materials and transport” Peter the Great St.Petersburg Polytechnical University, 195251, St.-Petersburg, Russia
Interests: Titanium alloys; tribology; fatigue; metal cutting; transmission and scanning electron microscopy; X-ray Diffraction; severe plastic deformation; mechanical properties of materials; materials science; metalworking; metal physics; Mechanical Engineering; Pressure Treatment; Coatings; corrosion
Dr. Usman Ali
MSAM, University of Waterloo, 200 University Ave W, Waterloo, Ontario N2L 3G1, Canada
Interests: stainless steel; laser powder bed fusion
Prof. Dr. Dmitrii E. Andreev
Merzhanov Institute of Structural Macrokinetics and Materials Science, Russian Academy of Sciences (ISMAN), Academician Osipyan str., 8, 142432 Chernogolovka, Moscow Region, Russia
Interests: effect of gravity forces on SHS processes; modeling of combustion processes; fundamentals of new processes for production of intermetallic, ceramic, and cermet composites; aluminothermic SHS reactions; cast materials
Prof. Dr. Carlos Angulo
Department of Mechanical Engineering, University of the Basque Country (UPV/EHU), Plaza Ingeniero Torres Quevedo, 1, 48013 Bilbao, Spain
Interests: wear in tool steels; Additive Manufacturing; hot stamping technology; influence of microstructure on wear; Computational mechanics
Dr. Krzysztof Aniołek
Institute of Materials Engineering, University of Silesia, 41-500 Chorzów, Poland
Interests: titanium and its alloys; oxidation; oxide layers, surface characterization; tribology; friction; wear; engineering materials; Mechanical Properties; adhesion
Dr. Troy Y. Ansell
Coatings and Composites for Extreme Environments Lab (CE)2, Department of Mechanical and Aerospace Engineering, Naval Postgraduate School, Monterey, CA 93943, USA
Interests: ferroelectric materials, piezoelectric materials and applications, and ultrasonics; high-temperature actuators; plasma synthesis of materials; Microscopy; X-ray Diffraction
Prof. Dr. Clodualdo Aranas
Department of Mechanical Engineering, University of New Brunswick, Fredericton, NB E3B 5A3, Canada
Interests: physical metallurgy; thermomechanical processing; phase transformation; Steels; alloy design; Materials characterization; metal additive manufacturing
Prof. Dr. Lavinia Cosmina Ardelean
Victor Babes University of Medicine and Pharmacy Timisoara, Romania
Interests: dentistry; dental materials; dental alloys; dental ceramics; dental resins; welding in dentistry; corrosion of dental alloys; polymers used in dentistry; 3D printing in dentistry; thermoplastic resins; assesment of dental alloys; CAD/CAM; oral health care
Prof. Dr. Michel Arrigoni
ENSTA Bretagne, IRDL, 2 Rue François Verny, 29200 Brest, France
Interests: Shock Wave; impact; explosion; BLAST; ballistics
Dr. Borja Arroyo Martínez
LADICIM, Depto. de Ing. del Terreno y de los Materiales, University of Cantabria, Avda. de los Castros, 44, 39005 Santander, Cantabria, Spain
Interests: mechanical behavior of metallic materials; corrosion under stress in aggressive environments; small punch; fracture mechanics and analysis of structural and mechanical failures
Dr. Garikoitz Artola
Azterlan Basque Research and Technology Alliance (BRTA), Aliendalde 6, 48200 Durango, Spain
Interests: hot stamping; heat treatment; hydrogen embrittlement; high strength steels; forging; deep drawing; Stamping; aluminum; Laser Cladding; Tooling
Dr. Francisco-Javier Ayaso
Fracture & Structural Integrity Research Group, Materials Science and Metallurgical Engineering, University of Salamanca (Spain), Polytechnic High School of Zamora, Avda. Requejo 33, 49022 Zamora.
Interests: Steels; pearlitic steels; cold drawing; engineering failure analysis; Material Characterization; plasticity; fracture behaviour of materials; Mechanical Behavior of Materials; Mechanical Testing; fractographic analysis; finite element analysis
Dr. Tarek Bachagha
- International Centre for Quantum and Molecular Structures, Physics Department, Shanghai, China. - Laboratory of Inorganic Chemistry, Ur-11-ES-73, University of Sfax, BP 1171, 3018 Sfax, Tunisia.
Interests: nanotechnology; materials chemistry; Physical Chemistry; Powder Metallurgy; shape memory alloys; Heusler Alloys; rapid solidfication; Ball milling; mechanical alloying; amorphous phase; cristalline phase; elastocaloric effect; directional solidification
Back to TopTop