Materials

Precision and Ultra-Precision Subtractive and Additive Manufacturing Processes of Alloys and Steels, 3rd Edition

edited by

Stanislaw Legutko

and

Szymon Wojciechowski

submission deadline 20 Feb 2026 | 3 articles | Viewed by 2300 | Submission Open

Keywords: precision and ultraprecision manufacturing; machining; additive manufacturing; mechanics; surface integrity

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advanced Catalytic and Adsorbent Materials for a Greener World

edited by

Ioan-Cezar Marcu

and Ionel Popescu

submission deadline 20 Feb 2026 | 1 articles | Viewed by 2169 | Submission Open

Keywords: catalyst; adsorbent; microporous materials; mesoporous materials; green synthesis; sustainable technologies; green energy; recovery technologies; environmental protection; waste valorization

(This special issue belongs to the Section Green Materials)

Microstructure and Defect Simulation during Solidification of Alloys

edited by

Ang Zhang

submission deadline 20 Feb 2026 | 2 articles | Viewed by 2101 | Submission Open

Keywords: microstructure; defect; solidification; alloys

(This special issue belongs to the Section Materials Simulation and Design)

Advanced Synthesis and Applications of Functional Nanomaterials: From Controlled Fabrication to Enhanced Performance

edited by

Vincent K.S. Hsiao

submission deadline 20 Feb 2026 | 2 articles | Viewed by 2096 | Submission Open

Keywords: functional nanomaterials; laser-assisted synthesis; optical properties; nonlinear optics; plasmonic nanostructures; nanocomposites; photocatalysis; surface-enhanced spectroscopy; light– matter interactions; nanomaterial characterization

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Advanced Piezoelectric Nanomaterials: Fundamentals and Applications

edited by Zhuomin Zhang, Xuemu Li and Xiaote Xu

submission deadline 20 Feb 2026 | 1 articles | Viewed by 2074 | Submission Open

Keywords: piezoelectric; advanced manufacturing; energy harvesting; nanogenerators; transducers; MEMS; sensors; actuation; biomedical applications.

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Advanced Materials Structures for Sound and Vibration Damping (2nd Edition)

edited by

Martin Vašina

submission deadline 20 Feb 2026 | 3 articles | Viewed by 2062 | Submission Open

Keywords: sound absorption; mechanical vibration; material structures; mechanical properties; viscoelasticity; manufacturing technologies; composite materials; mathematical simulations; porosity; excitation frequency; multilayer structures; microscopy

(This special issue belongs to the Section Materials Physics)

Application and Theoretical Research of Perovskite Structural Materials

edited by Bingcheng Luo, Jie Zhang and Ziyan Gao

submission deadline 20 Feb 2026 | 2 articles | Viewed by 1968 | Submission Open

Keywords: perovskite materials; energy storage; catalysis; electronics; optoelectronics; material synthesis; theoretical modeling; first-principles calculations; sustainable applications

(This special issue belongs to the Section Electronic Materials)

Eco-Sustainable Designing of Metal Oxide Thin Films with High Properties Using Advanced Micro- and Nanofabrication Technologies

edited by

Petronela Garoi

and

Ionel Stavarache

submission deadline 20 Feb 2026 | 2 articles | Viewed by 1936 | Submission Open

Keywords: metal oxid; thin films; advanced deposition; structural and optical properties; transparent contact; sensors; floating gate memories

(This special issue belongs to the Section Thin Films and Interfaces)

Preparation and Characterization of Functional Composite Materials (2nd Edition)

edited by

Grzegorz Kowaluk

and

Rene Herrera

submission deadline 20 Feb 2026 | 3 articles | Viewed by 1935 | Submission Open

Keywords: fiber-reinforced composites; three-dimensional composites; mechanical properties; physical properties; modeling and characterization; design of composite structures; natural fiber and bio-composites; hybrid composites

(This special issue belongs to the Section Advanced Composites)

Advances in π-Conjugated Organic Materials for Energy, Biomedical and Environmental Devices

edited by

Ichiro Imae

submission deadline 20 Feb 2026 | 1 articles | Viewed by 1865 | Submission Open

Keywords: π -conjugated polymers/oligomers; amorphous molecular materials; energy devices; biomedical applications; environmental technologies; solar cells; thermoelectric devices; graphene; carbon nanotubes; biosensors; water treatment

(This special issue belongs to the Section Materials Chemistry)

Advanced Concrete Formulations: Nanotechnology and Hybrid Materials

edited by

Nuha Mashaan

submission deadline 20 Feb 2026 | 2 articles | Viewed by 1751 | Submission Open

Keywords: nanotechnology; hybrid materials; advanced concrete; nano-silica; graphene oxide; carbon nanotubes; supplementary cementitious materials (SCMs); durability; mechanical performance; sustainable construction; smart concrete; microstructure improvement; cementitious composites; low-carbon concrete

(This special issue belongs to the Section Construction and Building Materials)

Hydroxyapatite and Hydroxyapatite-Based Materials

edited by Manuel Herrera-Zaldivar

submission deadline 20 Feb 2026 | Viewed by 1703 | Submission Open

Keywords: hydroxyapatite; biomaterials; bone regeneration; tissue engineering; drug delivery; luminescent properties; magnetic properties; piezoelectric properties; synthesis techniques; biological applications; nanotechnology

(This special issue belongs to the Section Biomaterials)

Research on Wearable Flexible Electronic Materials

edited by

Nabil Chakhchaoui

,

Lhaj El Hachemi Omari

and Omar Cherkaoui

submission deadline 20 Feb 2026 | Viewed by 1567 | Submission Open

Keywords: wearable electronics; flexible sensors; stretchable materials; organic semiconductors; printed electronics; wireless monitoring; MXenes; energy harvesting; smart textiles; biomedical devices

(This special issue belongs to the Section Electronic Materials)

Advances in the Experimentation and Numerical Modeling of Material Joining Processes (Third Edition)

edited by

Raul D. S. G. Campilho

submission deadline 20 Feb 2026 | 2 articles | Viewed by 1551 | Submission Open

Keywords: joining process; welding; brazing; riveting; mechanical fastening; adhesive bonding; clinching; friction stir welding; laser welding; diffusion welding; hybrid joining; experimental testing; numerical modeling; strength prediction; failure path prediction; finite element method; fracture mechanics; static load; dynamic load; impact load; fatigue load; residual stress; mechanical properties; thin-walled structures

(This special issue belongs to the Section Materials Simulation and Design)

Advancements in Plastic Forming and Metal Processing: From Fundamentals to Applications

edited by Qiang Zhu and Chaogang Ding

submission deadline 20 Feb 2026 | 2 articles | Viewed by 1415 | Submission Open

Keywords: plastic deformation; metal forming processes; metal and alloys; finite element modeling; microstructure evolution; mechanical properties; constitutive modeling; deformation mechanism

(This special issue belongs to the Section Metals and Alloys)

Modeling and Numerical Simulations in Materials Mechanics

edited by

Ping Xiang

submission deadline 20 Feb 2026 | 2 articles | Viewed by 1410 | Submission Open

Keywords: computational modeling; mechanics; materials and structures; AI and data-driven simulations; multiscale and multiphysics

(This special issue belongs to the Section Mechanics of Materials)

Radiation Damage and Radiation Defects of Materials

edited by Wentuo Han and

Yifan Zhang

submission deadline 20 Feb 2026 | 1 articles | Viewed by 1252 | Submission Open

Keywords: radiation damage; radiation defects; ion irradiation; defects recovery; irradiation hardening; irradiation embrittlement; irradiation creep

(This special issue belongs to the Section Materials Physics)

Research on Recycling/Reuse of Polymers and Composites

edited by Matthew Korey

submission deadline 20 Feb 2026 | 1 articles | Viewed by 1234 | Submission Open

Keywords: sustainability; additive manufacturing; composites recycling; plastics recycling; decarbonization; waste reduction

(This special issue belongs to the Section Polymeric Materials)

Fabrication, Properties and Applications of Functional Transparent Ceramics, Crystal and Glass

edited by Qinghui Jiang

submission deadline 20 Feb 2026 | 1 articles | Viewed by 1229 | Submission Open

Keywords: transparent ceramics; single crystals; smart glass; optical properties; sintering; nanoceramics; fabrication techniques; light transmission; photonic applications; nonlinear optics

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Advances in the Mechanical Behavior of Biopolymer Materials

edited by

Magdalena Kobielarz

submission deadline 20 Feb 2026 | 1 articles | Viewed by 1220 | Submission Open

Keywords: biodegradable polymers and copolymers; mechanical properties; chemical and physical properties; bulk and surface modification; surface functionalization; biodegradation; biocompatibility and cytocompatibility; biomedical applications

(This special issue belongs to the Section Polymeric Materials)

Emerging Materials for Photocatalytic and Photoelectrocatalytic Degradation of Pollutants

edited by Jingdong Zhang, Jianyu Gong and

Kai Yan

submission deadline 20 Feb 2026 | 1 articles | Viewed by 1205 | Submission Open

Keywords: photocatalysis; photoelectrocatalysis; photoactive materials; pollutants degradation; advanced oxidation technology

(This special issue belongs to the Section Catalytic Materials)

Non-Conventional Manufacturing Technologies and Materials for Sustainable Production

edited by

Silvio Genna

and

Flaviana Tagliaferri

submission deadline 20 Feb 2026 | 1 articles | Viewed by 1197 | Submission Open

Keywords: recycled materials; additive manufacturing; life cycle assessments (LCAs); circular economy; digital manufacturing; predictive maintenance

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advances in Metallic Alloys, Materials and High-Performance Additive Manufacturing: Challenges and Opportunities

edited by

Patricia C. Zambrano-Robledo

,

Hector R. Siller

and Leopoldo Ruiz-Huerta

submission deadline 20 Feb 2026 | 1 articles | Viewed by 1148 | Submission Open

Keywords: additive manufacturing; emerging metallic alloys; novel strategies; material characterization; advanced metallic materials; microstructure engineering; multi-material and multi-functional additive manufacturing; intelligent process control and digital manufacturing; post-processing strategies and technologies; performance optimization and applications; advanced characterization and non-destructive evaluation (NDE); sustainability and circular economy

(This special issue belongs to the Section Metals and Alloys)

Advanced Materials for Pavement and Road Infrastructure

edited by Jean Pascal Bilodeau and

Junyan Yi

submission deadline 20 Feb 2026 | 1 articles | Viewed by 1102 | Submission Open

Keywords: road materials; pavement design; pavement performance; technologies; pavement engineering; road infrastructure

(This special issue belongs to the Section Construction and Building Materials)

Advanced Materials and Technologies for Hydrogen Storage and Generation

edited by

Chinedu Junior Okere

submission deadline 20 Feb 2026 | 1 articles | Viewed by 1079 | Submission Open

Keywords: hydrogen storage materials; hydrogen generation technologies; metal hydrides; photocatalytic water splitting; electrochemical hydrogen production; nanomaterials for hydrogen applications; solid-state hydrogen storage; thermochemical hydrogen production; subsurface hydrogen production

(This special issue belongs to the Section Energy Materials)

Porous Carbon Nanomaterials and Their Composites for Energy Storage

edited by

Chunxu Pan

and Li Sun

submission deadline 20 Feb 2026 | 1 articles | Viewed by 1009 | Submission Open

Keywords: carbon nanomaterials; advanced porous structure; novel preparation techniques; carbon-based composites; electrochemical energy storage devices

(This special issue belongs to the Section Carbon Materials)

Heterogeneous Catalyst Materials: Research Advances and Characterization Techniques

edited by

Rami Doukeh

and

Ionut Banu

submission deadline 20 Feb 2026 | 1 articles | Viewed by 953 | Submission Open

Keywords: heterogeneous catalysis; catalyst design and optimization; advanced characterization techniques; reaction kinetics and mechanisms; nanostructured materials; magnetic catalysts; transition-metal oxides; sustainable chemical processes

(This special issue belongs to the Section Catalytic Materials)

The Heat Equation: The Theoretical Basis for Materials Processing

edited by

Mihai Oane

,

Liviu Duta

and

Alexandra Trefilov

submission deadline 20 Feb 2026 | 1 articles | Viewed by 900 | Submission Open

Keywords: heat equation; two temperature model; theoretical laser processing; theoretical material processing

(This special issue belongs to the Section Materials Simulation and Design)

High-Pressure Water Jet Machining in Materials Engineering

edited by

Andrzej Perec

and

Aleksandar Radomska-Zalas

submission deadline 20 Feb 2026 | 2 articles | Viewed by 888 | Submission Open

Keywords: water jet; pulsating water jet; abrasive suspension water jet; abrasive injection water jet; abrasive materials

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advanced Rare Earth Doped Functional Materials

edited by Khaldoon Nasser,

Laeticia Petit

and Nirajan Ojha

submission deadline 20 Feb 2026 | 1 articles | Viewed by 818 | Submission Open

Keywords: rare-earth ions; structure and material design; novel functional materials; glass; glass ceramic; crystals; luminescence; laser and gain media

(This special issue belongs to the Section Optical and Photonic Materials)

Advances in Superconductor Materials: Preparation and Characterization

edited by Wei Wu

submission deadline 20 Feb 2026 | 1 articles | Viewed by 817 | Submission Open

Keywords: superconductors; single crystal; thermal conductivity

(This special issue belongs to the Section Quantum Materials)

Miscellaneous Applications of Polymer Materials: Adsorption, Catalysis, Degradation and Environment Protection—2nd Edition

edited by

Magdalena Sobiesiak

submission deadline 20 Feb 2026 | 1 articles | Viewed by 778 | Submission Open

Keywords: polymeric materials; polymeric blends; composites and hybrid materials; biopolymers; biodegradable and ecofriendly polymers; green and sustainable polymers; characteristics and properties of polymeric materials; degradation of polymers; recycling and related techniques; applications of polymeric materials in adsorption; catalysis and environment protection (purification of water and air from xenobiotic and anthropogenic pollutants)

(This special issue belongs to the Section Polymeric Materials)

Polymer Composite Nanoarchitectonics

edited by

Gaulthier Rydzek

, Biswa Nath Bhadra and

Katsuhiko Ariga

submission deadline 20 Feb 2026 | Viewed by 760 | Submission Open

Keywords: polymer-based composites; nanoarchitectonics; nanoscale fillers; polymerization; electrospinning; layer-by-layer assembly

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Mechanical Behavior and Reliability of Micro-/Nanoscale Materials

edited by

Jorge M. Antunes

and

Nataliya A. Sakharova

submission deadline 20 Feb 2026 | 1 articles | Viewed by 641 | Submission Open

Keywords: micro- and nanoscale materials; mechanical properties; reliability; deformation mechanisms; nanoindentation; thin films; nanomechanics; advanced materials characterization; modelling and numerical simulation

(This special issue belongs to the Section Mechanics of Materials)

Preparation, Application, and Performance of Hydrogels

edited by Thamires Andrade Lima, Nicolas Javier Alvarez and

Fabio Furlan Ferreira

submission deadline 20 Feb 2026 | Viewed by 565 | Submission Open

Keywords: hydrogel; polymers; crosslinking; biocompatibility; structure

(This special issue belongs to the Section Soft Matter)

Advanced Dielectric, Piezoelectric and Ferroelectric Properties of Materials

edited by Ru Guo and

Mingyang Yan

submission deadline 20 Feb 2026 | 2 articles | Viewed by 554 | Submission Open

Keywords: dielectric; piezoelectric; ferroelectric; energy storage; energy harvesting; electrocaloric; sensing; actuation; electronics; fundamental principles

(This special issue belongs to the Section Electronic Materials)

Adhesion and Contact Mechanics of Material Surfaces

edited by

Wei Cao

and Ke Xiao

submission deadline 20 Feb 2026 | 1 articles | Viewed by 539 | Submission Open

Keywords: adhesion mechanics; contact mechanics; material surfaces; interfacial phenomena; tribology; surface engineering; nanomechanics; biomaterial interfaces; multiscale modeling; surface coatings

(This special issue belongs to the Section Thin Films and Interfaces)

Recent Advances in Electrocatalysts for Electrochemical Energy Conversion Reactions

edited by

Jiangtian Li

and

Deryn Chu

submission deadline 20 Feb 2026 | 1 articles | Viewed by 527 | Submission Open

Keywords: electrochemical energy conversion; electrocatalysts; hydrogen evolution/oxygen evolution; oxygen reduction reaction; CO2 reduction; ammonium production

(This special issue belongs to the Section Catalytic Materials)

Multiscale Simulation and Properties of Advanced Materials: Microstructure Evolution and Mechanical Analysis

edited by

Lin Zhang

and

Zhitong Bai

submission deadline 20 Feb 2026 | 1 articles | Viewed by 523 | Submission Open

Keywords: multiscale simulation; microstructures; mechanical behavior analysis; thermophysical properties; atomic scale modeling; data-driven simulation; image-based modeling; advanced structural materials; composite materials; advanced manufacturing and processing

(This special issue belongs to the Section Materials Simulation and Design)

Advanced Materials for Energy Storage: Synthesis, Characterization, and Applications

edited by

Qunhong Weng

,

Zeyan Zhou

and Taotao Zeng

submission deadline 20 Feb 2026 | 1 articles | Viewed by 518 | Submission Open

Keywords: advanced energy storage materials; lithium-ion batteries; solid-state batteries; lithium-sulfur batteries; electrocatalytic materials; material synthesis; characterization techniques; renewable energy storage; photocatalytic materials; energy storage applications

(This special issue belongs to the Section Energy Materials)

Biomaterials Science—Papers in Celebration of the UKSB 2025 Annual Conference

edited by

Timothy Douglas

,

Ihtesham Rehman

and

John G. Hardy

submission deadline 20 Feb 2026 | 1 articles | Viewed by 518 | Submission Open

Keywords: additive manufacturing; advanced antimicrobial materials; advanced engineering materials; advanced therapeutics; bioelectronics and biosensors; dental and orthopedic materials; drug delivery; neuroscience and neurotechnology; prosthetics and orthotics; tissue engineering and regenerative medicine

(This special issue belongs to the Section Biomaterials)

Advanced Welding in Alloys and Composites, Second Edition

edited by

Yang Li

and

Sansan Ao

submission deadline 20 Feb 2026 | 1 articles | Viewed by 518 | Submission Open

Keywords: advanced welding technologies; metals; polymers; composites; modelling and simulation; microstructure and properties

(This special issue belongs to the Section Manufacturing Processes and Systems)

Sustainability and Performance of Reinforced Concrete and Cement Composite

edited by

Alessio Cascardi

submission deadline 20 Feb 2026 | 1 articles | Viewed by 486 | Submission Open

Keywords: sustainable construction materials; reinforced concrete durability; cementitious composites; low-carbon cement; recycled aggregates; fiber-reinforced concrete (FRC); life cycle assessment (LCA); alternative binders; corrosion resistance; green Infrastructure

(This special issue belongs to the Section Construction and Building Materials)

Photocatalytic Materials and Technologies for Environmental Sustainability

edited by Salah Rafqah,

Lahoucine Bahsis

and

El Mountassir El Mouchtari

submission deadline 20 Feb 2026 | 1 articles | Viewed by 476 | Submission Open

Keywords: photocatalytic materials; adsorption; water purification; air purification; hydrogen production; hybrid materials; advanced photocatalysts; nanocomposites; environmental sustainability; waste valorization; photocatalytic hydrogen production

(This special issue belongs to the Section Catalytic Materials)

Material Surface Topography Measurement, Analysis and Characterization (2nd Edition)

edited by

Krzysztof Ciecieląg

and Kazimierz Zaleski

submission deadline 20 Feb 2026 | 1 articles | Viewed by 414 | Submission Open

Keywords: measurements of the surface topography of materials; characterization and modeling of the surface topography of materials; analysis and characterization of surface texture features; visual features of the surface of the material; tribological properties of the surface topography of materials; models of the shaping and optimization of surface topography; characteristics of the topography of worn surfaces; surface characteristics in additive manufacturing; topography of the surface of composite materials; surface topography of porous materials and foams

(This special issue belongs to the Section Advanced Materials Characterization)

Advancements and Trends in Perovskite Photovoltaics

edited by

Muhammad Adnan

and Zobia Irshad

submission deadline 20 Feb 2026 | Viewed by 393 | Submission Open

Keywords: perovskite solar cells; tandem solar cells; perovskite/silicon tandems; photovoltaic materials; optoelectronics

(This special issue belongs to the Section Energy Materials)

Advances in Multifunctional/Smart Concrete Materials and Structures

edited by

Sufen Dong

and Zhen Li

submission deadline 20 Feb 2026 | Viewed by 361 | Submission Open

Keywords: nano/fiber reinforced concrete materials and structures; multifunctional/smart concrete materials and structures; structural health monitoring of concrete; (ultra) high-performance concrete materials and structures; multifunctional cement concrete and smart structures; multifunctional/smart pavement materials and structures; digital and intelligent materials and structural design

(This special issue belongs to the Section Construction and Building Materials)

Advanced Steel Materials: Recrystallization, Phase Transformation and Microstructure Analysis (Second Edition)

edited by

Toshio Ogawa

submission deadline 20 Feb 2026 | Viewed by 299 | Submission Open

Keywords: recovery; recrystallization; phase transformation; precipitation; microstructure; texture; steel; iron; modeling and simulation; high-dimensional analysis; materials informatics

(This special issue belongs to the Section Metals and Alloys)

Modern Technologies in Metallurgical Manufacturing

edited by

Deliang Zhang

and

Dengshan Zhou

submission deadline 20 Feb 2026 | Viewed by 271 | Submission Open

Keywords: additive manufacturing; severe plastic deformation; rapid solidification; mechanical alloying; rapid sintering or consolidation of powders; solid-state recycling; hydrogen reduction of oxides for producing iron and steel; nanostructure; ultrafine grained structure; heterostructure; high-entropy alloys; amorphous alloys

(This special issue belongs to the Section Manufacturing Processes and Systems)

Electrode Material and Electrolytes for Supercapacitor

edited by

Yanmin Wang

submission deadline 20 Feb 2026 | Viewed by 250 | Submission Open

Keywords: supercapacitors; energy storage capacity; electrode materials

(This special issue belongs to the Section Energy Materials)

Journal Menu

Journal Browser

Special Issues

Further Information

Guidelines

MDPI Initiatives

Follow MDPI