Materials, Volume 17, Issue 6

The purpose of this study is to investigate the macro and micro properties of stabilized recycled aggregate base layers using gypsum slag cement (GSC) and compare them with ordinary Portland cement (OPC). To achieve this, four levels of recycled aggr...

This paper presents a research program aimed towards developing a method of producing lightweight, porous geopolymer composites for the construction industry based on industrial wastes. A direct method involving the addition of chemicals is currently...

Although humic acids (HAs) have been used to prepare absorbent hydrogels, their applications in many areas, such as agriculture, wastewater treatment and hygienic products, are not satisfactory due to their low solubility in organic solvents. In this...

It is well known that the annealing process plays a key role in tuning the properties of Fe-based amorphous soft magnetic alloys. However, the optimal annealing process for a particular amorphous alloy is often difficult to determine. Here, Fe81.4B13...

The physical and mechanical characteristics of seawater coral sand engineered cementitious composites (SCECC) were examined through uniaxial compression, three-point bending, and splitting tensile tests. The mechanical properties were scrutinized und...

The effect of graphene oxide (GO) on the mechanical strengths and durability of cement composites was researched by preparing GO-modified cement mortars. Thermogravimetric analysis (TGA) and nuclear magnetic resonance (29Si MAS-NMR) were performed on...

This study explores a simple method of fabricating hybrid supercapacitor electrodes, which could potentially broaden the application of this technology. The method involves electrospinning a uniform solution of Matrimid/Metal−Organic Polyhedra...

The property of vaporization phase transition in liquid oxygen face seals is a key factor affecting the stability of mechanical face seals in many fields, especially under cryogenic conditions. Here, a numerical model based on the saturated vapor pre...

In this study, Afşin Elbistan C-type fly ash (FA) was used, which protects against the sulphate reaction that damages concrete. The detrimental effects of post-reaction decrease with increasing fly ash fineness. The study used 10%, 30%, and 50%...

The development of Li-ion battery cases requires superior electrical conductivity, strength, and corrosion resistance for both cathode and anode to enhance safety and performance. Among the various battery case materials, super duplex stainless steel...