Editorial Board
- Extractive Metallurgy Section
- Powder Metallurgy Section
- Corrosion and Protection Section
- Biobased and Biodegradable Metals Section
- Metal Casting, Forming and Heat Treatment Section
- Additive Manufacturing Section
- Metal Failure Analysis Section
- Computation and Simulation on Metals Section
- Entropic Alloys and Meta-Metals Section
- Welding and Joining Section
- Structural Integrity of Metals Section
- Metal Matrix Composites Section
- Crystallography and Applications of Metallic Materials Section
- Metallic Functional Materials Section
Please note that the order in which the Editors appear on this page is alphabetical, and follows the structure of the editorial board presented on the MDPI website under information for editors: editorial board responsibilities.
Members
Laboratory of Mechanical Properties of Nanostructured Materials and Superalloys, Belgorod National Research University, Pobeda 85, Belgorod 308015, Russia
Interests: structural steels and alloys; microstructure; grain boundaries; dislocation substructure; deformation and annealing behavior; strength and plasticity
Special Issues, Collections and Topics in MDPI journals
Interests: structural steels and alloys; microstructure; grain boundaries; dislocation substructure; deformation and annealing behavior; strength and plasticity
Special Issues, Collections and Topics in MDPI journals
Polytechnic Department of Engineering and Architecture (DPIA), University of Udine, via delle Scienze 206, 33100 Udine, Italy
Interests: structural integrity; vibration fatigue; multiaxial fatigue; additive manufacturing
Special Issues, Collections and Topics in MDPI journals
Interests: structural integrity; vibration fatigue; multiaxial fatigue; additive manufacturing
Special Issues, Collections and Topics in MDPI journals
Department of Mechanical Engineering, Politecnico di Milano, Via La Masa 1, 20156 Milan, Italy
Interests: fatigue; integrity assessment; defects; additive manufacturing; mechanical components; railway components
Interests: fatigue; integrity assessment; defects; additive manufacturing; mechanical components; railway components
Université de Lyon, Ecole Centrale de Lyon, CNRS, LTDS, UMR5513, ENISE, 42023 Saint Etienne, France
Interests: computational mechanics; finite element method; mechanics of materials; thermo-mechanical processes; thermal stresses; multi-physics modeling; computational manufacturing; welding
Special Issues, Collections and Topics in MDPI journals
Interests: computational mechanics; finite element method; mechanics of materials; thermo-mechanical processes; thermal stresses; multi-physics modeling; computational manufacturing; welding
Special Issues, Collections and Topics in MDPI journals
Department of Chemical Engineering (DEQ), Universidade Federal de Santa Maria, Santa Maria, Brazil
Interests: recycling processes; leaching; liquid-liquid extraction; separation and purification process; pyrolysis; mechanical processing; nanofibers; supercritical fluids
Special Issues, Collections and Topics in MDPI journals
Interests: recycling processes; leaching; liquid-liquid extraction; separation and purification process; pyrolysis; mechanical processing; nanofibers; supercritical fluids
Special Issues, Collections and Topics in MDPI journals
National Research Council, Institute of Condensed Matter Chemistry and Technologies for Energy, Via G. Previati 1E, 23900 Lecco, Italy
Interests: production, characterization and workability of unconventional shape memory alloys, mainly for high temperature applications, as well as laser material processing (welding, drilling, cutting, surface modification and thermal treatment) of advanced materials, such as shape memory alloys as well as titanium, magnesium alloys and aluminium based metal matrix composites
Special Issues, Collections and Topics in MDPI journals
Interests: production, characterization and workability of unconventional shape memory alloys, mainly for high temperature applications, as well as laser material processing (welding, drilling, cutting, surface modification and thermal treatment) of advanced materials, such as shape memory alloys as well as titanium, magnesium alloys and aluminium based metal matrix composites
Special Issues, Collections and Topics in MDPI journals
School of Mechanical and Design Engineering, University of Portsmouth, Hampshire, PO1 2ST, UK
Interests: physical metallurgy; deformation mechanism; microstructure characterisation; fracture mechanics and failure mechanism; microtexture and microstructure evolutions during thermomechanical processing and phase transformation of cubic and hcp structures; texture analysis; structure/property relationship; mechanical property of metals; high temperature corrosion; electron microscopy; in-situ observation using SEM; EBSD; neutron and synchrotron X-ray diffraction as well as non-destructive 3D imaging (x-ray micro-tomography)
Special Issues, Collections and Topics in MDPI journals
Interests: physical metallurgy; deformation mechanism; microstructure characterisation; fracture mechanics and failure mechanism; microtexture and microstructure evolutions during thermomechanical processing and phase transformation of cubic and hcp structures; texture analysis; structure/property relationship; mechanical property of metals; high temperature corrosion; electron microscopy; in-situ observation using SEM; EBSD; neutron and synchrotron X-ray diffraction as well as non-destructive 3D imaging (x-ray micro-tomography)
Special Issues, Collections and Topics in MDPI journals
Department of Condensed Matter Physics, Universidad de Sevilla, Sevilla, Spain
Interests: amorphous and nanocrystalline alloys; mössbauer spectroscopy; mechanical alloying; soft magnetic properties; magnetocaloric effect
Interests: amorphous and nanocrystalline alloys; mössbauer spectroscopy; mechanical alloying; soft magnetic properties; magnetocaloric effect
Hydrogène et intermétalliques, ICMCB-CNRS-Université de Bordeaux, 87 Av du Dr Schweitzer, 33600 Pessac, France
Interests: intermetallics; hydrogen storage; hydrogen production; fuel cell; energy; material science; crystallography; solid state chemistry
Interests: intermetallics; hydrogen storage; hydrogen production; fuel cell; energy; material science; crystallography; solid state chemistry
Laser Hall, LTm Team (Laser Materials Processing), IUT Physical Measurements Department, Université de Bourgogne, 12 rue de la Fonderie, 71200 Le Creusot, France
Interests: modélisation en soudage/fabrication additive (couplages électromagnétiques, calculs thermomécaniques)—programmation robotique hors ligne
Interests: modélisation en soudage/fabrication additive (couplages électromagnétiques, calculs thermomécaniques)—programmation robotique hors ligne
School of Engineering, University of Waikato, Private Bag 3105, Hamilton 3240, New Zealand
Interests: engineering; materials and processing; near-net-shape manufacturing; powder metallurgy; casting; light metals; high entropy alloys; mechanical behaviour of materials; processing-microstructure-properties relationships; functionalised materials; advanced materials characterisation; sustainable materials
Interests: engineering; materials and processing; near-net-shape manufacturing; powder metallurgy; casting; light metals; high entropy alloys; mechanical behaviour of materials; processing-microstructure-properties relationships; functionalised materials; advanced materials characterisation; sustainable materials
Department of Civil and Mechanical Engineering, University of Cassino and Southern Lazio, 03043 Cassino, Italy
Interests: modeling materials behavior under extreme conditions (high strain rates, elevated temperature, pressure, large strain); fracture mechanics and damage mechanics; creep; experimental characterization; finite element simulation and computational mechanics; characterization and damage assessment of additively manufactured materials (metals and alloys)
Special Issues, Collections and Topics in MDPI journals
Interests: modeling materials behavior under extreme conditions (high strain rates, elevated temperature, pressure, large strain); fracture mechanics and damage mechanics; creep; experimental characterization; finite element simulation and computational mechanics; characterization and damage assessment of additively manufactured materials (metals and alloys)
Special Issues, Collections and Topics in MDPI journals
Institut für Materialphysik, Universität Göttingen, 37077 Göttingen, Germany
Interests: metals and alloys; mechanical properties; microstructure-strength relationship; defect-solute interactions; thermodynamics; transmission electron microscopy
Special Issues, Collections and Topics in MDPI journals
Interests: metals and alloys; mechanical properties; microstructure-strength relationship; defect-solute interactions; thermodynamics; transmission electron microscopy
Special Issues, Collections and Topics in MDPI journals
Department of Mechanical Engineering, Polytechnic University of Coimbra, Coimbra, Portugal
Interests: fatigue; fracture mechanics; fatigue crack propagation; crack closure; additive manufacturing; structural integrity
Special Issues, Collections and Topics in MDPI journals
Interests: fatigue; fracture mechanics; fatigue crack propagation; crack closure; additive manufacturing; structural integrity
Special Issues, Collections and Topics in MDPI journals
Department of Mechanical Engineering, University of technology of Compiegne, Centre de recherches de Royallieu, Laboratoire Roberval, BP 20529, Rue Roger Couttolenc, CS 60319, 60203 Compiegne CEDEX, France
Interests: study of the relationships between the behavior at the microstructure scale and the macroscopic response of materials; multi-scale analysis of the behavior of structural materials; characterization, modeling and identification of nonlinear behavior, effects on the simulation of shaping processes; modeling of elasto (visco-) plastic behavior and application in the study of rough contact; modeling of the coupled effects of texture and microstructure
Interests: study of the relationships between the behavior at the microstructure scale and the macroscopic response of materials; multi-scale analysis of the behavior of structural materials; characterization, modeling and identification of nonlinear behavior, effects on the simulation of shaping processes; modeling of elasto (visco-) plastic behavior and application in the study of rough contact; modeling of the coupled effects of texture and microstructure
Department of Mechanical Engineering, University of Coimbra, 3030-788 Coimbra, Portugal
Interests: additive manufacturing; fracture mechanics; mechanical behavior of materials; solid mechanics; structural integrity
Special Issues, Collections and Topics in MDPI journals
Interests: additive manufacturing; fracture mechanics; mechanical behavior of materials; solid mechanics; structural integrity
Special Issues, Collections and Topics in MDPI journals
Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, VIC 3000, Australia
Interests: interaction of high-power laser radiation with matter leading to changes in state from heating to melting and applications in additive manufacture; joining and surfacing
Special Issues, Collections and Topics in MDPI journals
Interests: interaction of high-power laser radiation with matter leading to changes in state from heating to melting and applications in additive manufacture; joining and surfacing
Special Issues, Collections and Topics in MDPI journals
Oak Ridge National Laboratory, Oak Ridge, TN 37831, USA
Interests: bulk metallic glasses; high entropy alloys; irradiation effects; serrated flow; nanoindentation; mathematical analysis; X-ray diffraction
Special Issues, Collections and Topics in MDPI journals
Interests: bulk metallic glasses; high entropy alloys; irradiation effects; serrated flow; nanoindentation; mathematical analysis; X-ray diffraction
Special Issues, Collections and Topics in MDPI journals
Department TEXMAT, Clausthal University of Technology and Helmholtz-Zentrum Geesthacht (HZG), Max-Planck-Str, D-21502 Geesthacht, Germany
Interests: materials characterization by X-rays; neutrons, synchrotron, and EBSD; instrumentation; texture, phase, and stress analysis; Mg, Al, and Ti alloys; industrial application
Special Issues, Collections and Topics in MDPI journals
Interests: materials characterization by X-rays; neutrons, synchrotron, and EBSD; instrumentation; texture, phase, and stress analysis; Mg, Al, and Ti alloys; industrial application
Special Issues, Collections and Topics in MDPI journals
Department of Mechanical and Product Design Engineering, Swinburne University of Technology, Hawthorn, VIC 3122, Australia
Interests: steelmaking; pyrometallurgy; extractive metallurgy; solar thermal energy; waste processing; metals recycling
Special Issues, Collections and Topics in MDPI journals
Interests: steelmaking; pyrometallurgy; extractive metallurgy; solar thermal energy; waste processing; metals recycling
Special Issues, Collections and Topics in MDPI journals
MATEIS Laboratory, INSA Lyon, 69100 Villeurbanne, France
Interests: characterization of internal fatigue cracks; synchrotron X-ray tomography; in situ experiments
Special Issues, Collections and Topics in MDPI journals
Interests: characterization of internal fatigue cracks; synchrotron X-ray tomography; in situ experiments
Special Issues, Collections and Topics in MDPI journals
DIISM—Department of Industrial Engineering and Mathematics, Università Politecnica delle Marche, 60131 Via Brecce Bianche, Ancona, Italy
Interests: light alloys (aluminum, magnesium, titanium); steels (carbon-steels, HSLA, TRIP, TWIP, stainless-steels, tool-steels); superalloys (Co-based); nanostructured coatings (DLC, N-based, B-based); severe plastic deformation techniques (ECAP, HPT); hot-deformation (creep, hot torsion); TEM; FEGSEM; XRD; nanoindentation
Special Issues, Collections and Topics in MDPI journals
Interests: light alloys (aluminum, magnesium, titanium); steels (carbon-steels, HSLA, TRIP, TWIP, stainless-steels, tool-steels); superalloys (Co-based); nanostructured coatings (DLC, N-based, B-based); severe plastic deformation techniques (ECAP, HPT); hot-deformation (creep, hot torsion); TEM; FEGSEM; XRD; nanoindentation
Special Issues, Collections and Topics in MDPI journals
DynaMat SUPSI Laboratory, University of Applied Sciences and Arts of Southern Switzerland, 6850 Mendrisio, Switzerland
Interests: high strain-rate; impact; experimental mechanics; crash worthiness; protection; concrete; UHPC; metals; composite; split Hopkinson bar technologies
Special Issues, Collections and Topics in MDPI journals
Interests: high strain-rate; impact; experimental mechanics; crash worthiness; protection; concrete; UHPC; metals; composite; split Hopkinson bar technologies
Special Issues, Collections and Topics in MDPI journals
Department of Material Science & Engineering, Texas A&M University, 3127 TAMU, College Station, TX 77843-3127, USA.
Interests: Computational Materials Science; Nanoscience, physical, thermal, mechanical and dynamic properties of metals and alloys
Interests: Computational Materials Science; Nanoscience, physical, thermal, mechanical and dynamic properties of metals and alloys
Department of Industrial Engineering, University of Padova, 35131 Padova, Italy
Interests: fracture mechanics; fatigue experimental testing; fatigue and fracture analysis; fatigue crack growth; crack paths; fatigue crack growth rate
Special Issues, Collections and Topics in MDPI journals
Interests: fracture mechanics; fatigue experimental testing; fatigue and fracture analysis; fatigue crack growth; crack paths; fatigue crack growth rate
Special Issues, Collections and Topics in MDPI journals
Department of Mechanics, Mathematics and Management, Polytechnic University of Bari, Via Orabona 4, 70125 Bari, Italy
Interests: laser powder bed fusion; directed energy deposition; process monitoring; microstructure; deep learning; additive manufacturing in metals; laser processing; residual stress
Special Issues, Collections and Topics in MDPI journals
Interests: laser powder bed fusion; directed energy deposition; process monitoring; microstructure; deep learning; additive manufacturing in metals; laser processing; residual stress
Special Issues, Collections and Topics in MDPI journals
School of Materials, Sun Yat-sen University, Guangzhou 510006, China
Interests: corrosion electrochemistry; corrosion; protection of light alloy
Special Issues, Collections and Topics in MDPI journals
Interests: corrosion electrochemistry; corrosion; protection of light alloy
Special Issues, Collections and Topics in MDPI journals
Department of Chemical and Materials Engineering, University of Auckland, Private Bag 92019, Auckland 1142, New Zealand
Interests: light metals; powder metallurgy; energy-related materials; glass ceramics
Special Issues, Collections and Topics in MDPI journals
Interests: light metals; powder metallurgy; energy-related materials; glass ceramics
Special Issues, Collections and Topics in MDPI journals
School of Materials Science & Engineering, Zhejiang University, 38 Zheda Road, Hangzhou 310027, China
Interests: bulk metallic glassses and amorphous thin films; high entropy alloys and thin films; mechanical behavior and nanoindentation; microstructure characterization of magnesium alloys by state-of-the-art technology such as TEM, SEM and SR-XRD
Interests: bulk metallic glassses and amorphous thin films; high entropy alloys and thin films; mechanical behavior and nanoindentation; microstructure characterization of magnesium alloys by state-of-the-art technology such as TEM, SEM and SR-XRD
Physical Metallurgy Department, National Centre for Metallurgical Research (CENIM-CSIC), Avda Gregorio del Amo 8, 28040 Madrid, Spain
Interests: phase transformations in solid state; microstructural characterization and mechanical properties optimization of steels and iron-based alloys; thermodynamics and kinetics modeling of iso- and anisothermal phase transformations; steel design for industrial applications with high requirements
Interests: phase transformations in solid state; microstructural characterization and mechanical properties optimization of steels and iron-based alloys; thermodynamics and kinetics modeling of iso- and anisothermal phase transformations; steel design for industrial applications with high requirements
