MDPI’s 2021 Best Paper Awards in “Chemistry & Materials Sciences”—Winners Announced

The purpose of our Best Paper Awards is to promote and recognize the most impactful contributions published within MDPI journals.

The editors of each journal carefully selected reviews and research papers through a rigorous judging process based on criteria such as the scientific merit, overall impact, and the quality of presentation of the papers published in the journal last year.

We are honored to present the winners in the “Chemistry & Materials Sciences” category, who were selected amongst the extensive competition, and congratulate the authors for their outstanding scientific publications.

MDPI will continue to provide support and recognition to the academic community.

C — Journal of Carbon Research：

• “Activated Carbons Derived from High-Temperature Pyrolysis of Lignocellulosic Biomass”
  by Cristian I. Contescu, Shiba P. Adhikari, Nidia C. Gallego, Neal D. Evans and Bryan E. Biss
  C 2018, 4(3), 51; doi:10.3390/c4030051

Catalysts:

• “Hydrogen Oxidation on Ni-Based Electrocatalysts: The Effect of Metal Doping”
  by Elena S. Davydova, Jérémie Zaffran, Kapil Dhaka, Maytal Caspary Toroker and Dario R. Dekel
  Catalysts 2018, 8(10), 454; doi:10.3390/catal8100454
• “Photocatalytic Hydrogen Production: Role of Sacrificial Reagents on the Activity of Oxide, Carbon, and Sulfide Catalysts”
  by Vignesh Kumaravel, Muhammad Danyal Imam, Ahmed Badreldin, Rama Krishna Chava, Jeong Yeon Do, Misook Kang and Ahmed Abdel-Wahab
  Catalysts 2019, 9(3), 276; doi:10.3390/catal9030276
• “A General Overview of Support Materials for Enzyme Immobilization: Characteristics, Properties, Practical Utility”
  by Jakub Zdarta, Anne S. Meyer, Teofil Jesionowski and Manuel Pinelo
  Catalysts 2018, 8(2), 92; doi:10.3390/catal8020092
• “Mechanistic Insights into Photodegradation of Organic Dyes Using Heterostructure Photocatalysts”
  by Yi-Hsuan Chiu, Tso-Fu Mark Chang, Chun-Yi Chen, Masato Sone and Yung-Jung Hsu
  Catalysts 2019, 9(5), 430; doi:10.3390/catal9050430

Ceramics:

• “Chemical Preparation Routes and Lowering the Sintering Temperature of Ceramics”
  by Philippe Colomban
  Ceramics 2020, 3(3), 312–339; doi:10.3390/ceramics3030029

Coatings:

• “State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design”
  by Adrita Dass and Atieh Moridi
  Coatings 2019, 9(7), 418; doi:10.3390/coatings9070418
• “Encapsulation of Organic and Perovskite Solar Cells: A Review”
  by Ashraf Uddin, Mushfika Baishakhi Upama, Haimang Yi and Leiping Duan
  Coatings 2019, 9(2), 65; doi:10.3390/coatings9020065
• “Poly (Lactic Acid)/Thermoplastic Starch Films: Effect of Cardoon Seed Epoxidized Oil on Their Chemicophysical, Mechanical, and Barrier Properties”
  by Rosa Turco, Rodrigo Ortega-Toro, Riccardo Tesser, Salvatore Mallardo, Sofia Collazo-Bigliardi, Amparo Chiralt Boix, Mario Malinconico, Massimo Rippa, Martino Di Serio and Gabriella Santagata
  Coatings 2019, 9(9), 574; doi:10.3390/coatings9090574
• “Physical and Morphological Characterization of Chitosan/Montmorillonite Films Incorporated with Ginger Essential Oil”
  by Victor Gomes Lauriano Souza, João Ricardo Afonso Pires, Carolina Rodrigues, Patricia Freitas Rodrigues, Andréia Lopes, Rui Jorge Silva, Jorge Caldeira, Maria Paula Duarte, Francisco Braz Fernandes, Isabel Maria Coelhoso and Ana Luisa Fernando
  Coatings 2019, 9(11), 700; doi:10.3390/coatings9110700
• “Application and Evaluation of a Pectin-Based Edible Coating Process for Quality Change Kinetics and Shelf-Life Extension of Lime Fruit (Citrus aurantifolium)”
  by Neda Maftoonazad and Hosahalli S. Ramaswamy
  Coatings 2019, 9(5), 285; doi:10.3390/coatings9050285

Crystals:

• “Crystal and Magnetic Structures in Layered, Transition Metal Dihalides and Trihalides”
  by Michael A. McGuire
  Crystals 2017, 7(5), 121; doi:10.3390/cryst7050121
• “σ-Hole Interactions: Perspectives and Misconceptions”
  by Peter Politzer and Jane S. Murray
  Crystals 2017, 7(7), 212; doi:10.3390/cryst7070212
• “σ-Hole Interactions of Covalently-Bonded Nitrogen, Phosphorus and Arsenic: A Survey of Crystal Structures”
  by Peter Politzer, Jane S. Murray, Goran V. Janjić and Snežana D. Zarić 
  Crystals 2014, 4(1), 12-31; doi:10.3390/cryst4010012
• “Epitaxial Graphene on SiC: A Review of Growth and Characterization”
  by Gholam Reza Yazdi, Tihomir Iakimov and Rositsa Yakimova
  Crystals 2016, 6(5), 53; doi:10.3390/cryst6050053

Magnetochemistry:

• “A Clock Transition in the Cr₇Mn Molecular Nanomagnet”
  by Charles A. Collett, Kai-Isaak Ellers, Nicholas Russo, Kevin R. Kittilstved, Grigore A. Timco, Richard E. P. Winpenny and Jonathan R. Friedman
  Magnetochemistry 2019, 5(1), 4; doi:10.3390/magnetochemistry5010004
• “A Series of Field-Induced Single-Ion Magnets Based on the Seven-Coordinate Co(II) Complexes with the Pentadentate (N₃O₂) H₂dapsc Ligand”
  by Vyacheslav A. Kopotkov, Denis V. Korchagin, Valentina D. Sasnovskaya, Ildar F. Gilmutdinov and Eduard B. Yagubskii
  Magnetochemistry 2019, 5(4), 58; doi:10.3390/magnetochemistry5040058
• “Magnetic Janus Particles for Static and Dynamic (Bio)Sensing”
  by Susana Campuzano, Maria Gamella, Verónica Serafín, María Pedrero, Paloma Yáñez-Sedeño and José Manuel Pingarrón
  Magnetochemistry 2019, 5(3), 47; doi:10.3390/magnetochemistry5030047

Membranes:

• “Composite Membranes for High Temperature PEM Fuel Cells and Electrolysers: A Critical Review”
  by Xinwei Sun, Stian Christopher Simonsen, Truls Norby and Athanasios Chatzitakis
  Membranes 2019, 9(7), 83; doi:10.3390/membranes9070083

• “Transport Characteristics of Fujifilm Ion-Exchange Membranes as Compared to Homogeneous Membranes AMX and CMX and to Heterogeneous Membranes MK-40 and MA-41”
  by Veronika Sarapulova, Inna Shkorkina, Semyon Mareev, Natalia Pismenskaya, Natalia Kononenko, Christian Larchet, Lasaad Dammak and Victor Nikonenko
  Membranes 2019, 9(7), 84; doi:10.3390/membranes9070084

Nanomaterials:

• “Nanomaterials for the Removal of Heavy Metals from Wastewater”
  by Jinyue Yang, Baohong Hou, Jingkang Wang, Beiqian Tian, Jingtao Bi, Na Wang, Xin Li and Xin Huang
  Nanomaterials 2019, 9(3), 424; doi:10.3390/nano9030424
• “Injectable Alginate-Peptide Composite Hydrogel as a Scaffold for Bone Tissue Regeneration”
  Moumita Ghosh, Michal Halperin-Sternfeld, Itzhak Grinberg and Lihi Adler-Abramovich
  Nanomaterials 2019, 9(4), 497; doi:10.3390/nano9040497
• “Carbon Dots and Graphene Quantum Dots in Electrochemical Biosensing”
  by Susana Campuzano, Paloma Yáñez-Sedeño and José M. Pingarrón
  Nanomaterials 2019, 9(4), 634; doi:10.3390/nano9040634
• “A Smart Nanovector for Cancer Targeted Drug Delivery Based on Graphene Quantum Dots”
  by Daniela Iannazzo, Alessandro Pistone, Consuelo Celesti, Claudia Triolo, Salvatore Patané, Salvatore V. Giofré, Roberto Romeo, Ida Ziccarelli, Raffaella Mancuso, Bartolo Gabriele, Giuseppa Visalli, Alessio Facciolà and Angela Di Pietro
  Nanomaterials 2019, 9(2), 282; doi:10.3390/nano9020282
• “Evolution of Wearable Devices with Real-Time Disease Monitoring for Personalized Healthcare”
  by Kyeonghye Guk, Gaon Han, Jaewoo Lim, Keunwon Jeong, Taejoon Kang, Eun-Kyung Lim and Juyeon Jung
  Nanomaterials 2019, 9(6), 813; doi:10.3390/nano9060813
• “An Ultra-High-Energy Density Supercapacitor; Fabrication Based on Thiolfunctionalized Graphene”
  by Janardhanan. R. Rani, Ranjith Thangavel, Se-I Oh, Yun Sung Lee and Jae-Hyung Jang
  Nanomaterials 2019, 9(2), 148; doi:10.3390/nano9020148

Polymers:

• “The Relationships between the Working Fluids, Process Characteristics and Products from the Modified Coaxial Electrospinning of Zein”
  by Menglong Wang, Tao Hai, Zhangbin Feng, Deng-Guang Yu, Yaoyao Yang and SW Annie Bligh 
  Polymers 2019, 11(8), 1287; doi:10.3390/polym11081287
• “Design of Controlled Release System for Paracetamol Based on Modified Lignin”
  by Mahboubeh Pishnamazi, Hamid Hafizi, Saeed Shirazian, Mario Culebras, Gavin M. Walker and Maurice N. Collins 
  Polymers 2019, 11(6), 1059; doi:10.3390/polym11061059
• “Additive Manufacturing of PLA-Based Composites Using Fused Filament Fabrication: Effect of Graphene Nanoplatelet Reinforcement on Mechanical Properties, Dimensional Accuracy and Texture”
  by Miguel Ángel Caminero, Jesús Miguel Chacón, Eustaquio García-Plaza, Pedro José Núñez, José María Reverte and Jean Paul Becar
  Polymers 2019, 11(5), 799; doi:10.3390/polym11050799
• “Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications”
  by Miguel Ángel Caminero, Jesús Miguel Chacón, ,Eustaquio García-Plaza, Pedro José Núñez, José María Reverte and Jean Paul Becar
  Polymers 2019, 11(10), 1667; doi:10.3390/polym11101667