2026 September - 9 articles
In pressurized irrigation networks, water-intake hydrants combine flow regulation, shutoff and metering in a single cast body, and the resulting coupled resistance obscures how much each function costs. The conventional body of a DN100 (nominal diame...
Gas–liquid two-phase flow is widely recognized as an effective strategy for enhancing membrane distillation (MD) performance by mitigating thermal and concentration polarization. However, most studies interpret this enhancement using time-avera...
Liquid films formed from nanofluids exhibit a ubiquitous, multiple stepwise thinning phenomenon, where the film thins layer by layer. Under film confinement, the nanoparticles experience a significant reduction in their degrees of freedom, inducing e...
In this study, two low-concentration solutions of 1,4,5,8-Naphthalene tetracarboxylic dianhydride (NTCDA) in two imidazolium-based ionic liquids (IL), EMIM-DCA and EMIM-Ac, at room temperature were mixed; after around ten days of storage, the formati...
Increasing freshwater scarcity has intensified the need for energy-efficient and sustainable desalination technologies, making solar-assisted Direct Contact Membrane Distillation (DCMD) an attractive solution due to its low-temperature operation, hig...
The equation of state (EoS) is very helpful for the prediction of both high-pressure phase diagrams and fundamental properties. However, the general cubic EoS has low prediction accuracy for compressed and saturated liquid densities and the pure comp...
The main objective of this research was to determine and correlate the equilibrium solubility of sodium sulfamethazine (NaSMT) in several {ethanol (1) + water (2)} mixtures reported in mass/volume and mass/mass percentages at different temperatures,...
Fused Deposition Modeling (FDM) has emerged as one of the most widely adopted additive manufacturing (AM) technologies, valued for its simplicity, cost-effectiveness, and versatility in fabricating complex geometries. The geometry of the extrusion no...
Solubility studies are essential for developing more efficient dosing processes and systems. The solubility of INH in a mixture of PEG 300 (1) + water (2) was evaluated at various temperatures using UV/Vis spectrophotometry and the shaking flask meth...
