June 2023 - 34 articles
A rapidly developing area of ceramic science and technology involves research on the interaction between implanted biomaterials and the human body. Over the past half century, the use of bioceramics has revolutionized the surgical treatment of variou...
Long-term sustainability and decreasing amount of fossil oil reserves require a partial or complete transformation of traditional lubricating oils. The use of silica nanoparticles as a lubricant additive has a huge tribological potential, which has a...
The rock-salt ordered A2CuWO6 (A = Sr, Ba) with I4/m space group and disordered SrCu0.5M0.5O3−δ (M = Ta, Nb) with Pm3m space group perovskites were successfully obtained via a solid-state reaction route. Heat treatment of Ba2CuWO6 over 90...
Tm2(Ti2−xTmx)O7−x/2 (x = 0, 0.1, 0.18, 0.28, 0.74) solid electrolytes have been investigated as potential electrolyte materials for solid oxygen fuel cells (SOFCs), operating in the medium temperature range (600–700 °C). The des...
One of the most important steps in the extrusion processing of ceramic inks is the initial drying of the ceramic parts. This study aimed to investigate the drying behaviour of an Al2O3-based ceramic ink optimised to be processed by extrusion processi...
Layered silicates with a montmorillonite structure are widely used in various fields related to adsorption, gas and water treatment, catalysis, cosmetology and medicine. Under conditions of directed hydrothermal synthesis, montmorillonites with the s...
The work proposes the use of aluminum oxide-based ceramic objects with a TPMS-Q-surface geometry as elements of armor structures. The samples were produced using the SLA-DLP 3D printing method. The main properties of the sample were determined using...
For fixed dentures, new generations of zirconia with diverse characteristics and design choices are of significant interest. Although in vitro studies and finite element analysis (FEA) studies have been published, comprehension of various new methods...
Ceramic ZnO-SnO2-Fe2O3 powders and transparent coatings on glasses prepared using the non-isothermal polymer-salt method demonstrate a strong ability to generate chemically active oxygen species under UV and visible irradiation. Crystal structures an...
The purpose of this work was to investigate the effect of the burning environment on the properties and phase composition of clinker-based ceramic specimens made from loam with diatomite and bentonite clay in order to develop technological parameters...
of 4
Get Alerted
Add your email address to receive forthcoming issues of this journal.
