Nanomaterials, Volume 15, Issue 23

Finding efficient ways to store energy is a current topic both at the macro level and at the microscale. As silicon plates are the main platform for the integration of microelectronic devices, it is reasonable to use the silicon structures as the act...

In the original publication [...]

Nanomaterial-based systems (NBS) have emerged as transformative elements in advanced surface engineering, offering superior corrosion resistance, mechanical strength, and tribological resilience governed by unique phenomena inherent to the nanoscale....

Since the discovery of graphene in 2004, two-dimensional (2D) materials have received increasing attention owing to their unique electronic, optical, mechanical, and chemical properties [...]

Celtis africana, a rare plant native to southwestern Saudi Arabia, was explored for the first time as a source for the green synthesis of silver nanoparticles (AgNPs). Catechol-bearing phenolic amides in the aqueous leaf extract acted as both reducin...

Coal gasification slag (CGS), an industrial solid waste produced during high-temperature (1200–1600 °C) coal gasification, was utilized as the primary raw material, combined with minor additions of coal gangue and calcium oxide, to synthesi...

Selective adsorption is regarded as a promising alternative for propylene/propane separation. However, the similar physicochemical properties of these two components pose a challenge in developing adsorbents that simultaneously exhibit high selectivi...

Ultrashort fiber lasers are one of the current research hotspots in the field of lasers. They have the advantages of compact structure and high beam quality. Passively mode-locking using saturable absorbers (SAs) is an important scheme for generating...

A novel four-in-one (4-in-series) MicroLED-in-Package (MiP4) architecture is demonstrated for the first time, integrating four sub-85 µm blue micro-LED (µ-LED) dies on a transparent glass substrate through a redistribution-layer (RDL) int...

Single-walled carbon nanotube (SWCNT) films are potential materials for thermoelectric generators (TEGs) owing to their flexibility and high thermoelectric performance near 300 K. However, they inherently exhibit low mechanical strength and high ther...