Metals, Volume 12, Issue 9

Fluorspar is considered a critical raw material for the European Union, due to its industrial uses and lack of sufficient extraction in European countries. It is a source for hydrofluoric acid manufacture, this latter chemical being employed, among o...

Environment-friendly materials (e.g., Honey and Mint) are used as corrosion inhibitors for aluminum in hydrochloric acid (HCl) using both the density functional theory (DFT) at the B3LYP/6–31G* basis set level and semi-empirical methods (AM1, P...

FeCrMnNi high-entropy alloys prepared by vacuum induction melting were tested and characterized using an X-ray diffractometer, a scanning electron microscope, a micro hardness tester and a universal tensile tester to investigate the effects of the he...

Changes of structure, phase composition and microhardness in high-strength α + β titanium alloy were investigated after electromechanical treatment (EMT) and subsequent aging. The EMT was performed with alternating current density (j of 30...

The highly regarded Fe2P-based magnetocaloric materials are usually fabricated by ball milling, and require an additional extended annealing treatment at high temperatures (at temperatures up to 1423 K for several hours to days). In this work, we sho...

Two steels with different nickel (Ni) content were investigated to reveal the role of Ni on strength-toughness balance and hydrogen embrittlement susceptibility. Although they were similar in microstructure, i.e., nano-particles were precipitated on...

Printed circuit boards (PCBs) contain valuable metals, epoxy resin, and glass fiber, resulting in them being considered as attractive secondary sources of metals. Due to the complex metal compositions in PCBs, it is difficult to clarify the mechanism...

In this paper, the giant magneto-impedance (GMI) model of a cylindrical alloy fiber was established by the Maxwell equation and Landau–Lifshitz equation to simulate the influence of physical parameters of cylindrical alloy fiber on GMI under di...

Compared to the conventional deoxidation process with Al or Si-Mn for 55SiCr spring steel production, the possibility of using a Si-Ca-Ba compounded deoxidizer to control the behavior of non-metallic inclusions in spring steel was explored in this st...

The present study has been undertaken to evaluate the basicity concept of oxygen content estimation subject to submerged arc welded metal. The investigated fluxes cover a wide range of basicity indices from 0.31 to 19.00 at full coverage with acidic,...