Energies, Volume 12, Issue 3

In this paper, we study a promising plate-type heat exchanger, the printed circuit heat exchanger (PCHE), which has high compactness and is suitable for high-pressure conditions as a vaporizer during vaporization. The thermal hydraulic performance of...

Five different ionomer dispersions using water–isopropanol (IPA) and N-methylpyrrolidone (NMP) were investigated as ionomer binders for catalyst layers in proton exchange membrane fuel cells. The distribution of ionomer plays an important role...

The impact of distributed energy resources in the operation of power and energy systems is nowadays unquestionable at the distribution level but also at the whole power system management level [...]

The main objective of short-term hydrothermal scheduling is the optimal allocation of the hydro and thermal generating units, so that the total cost of thermal plants can be minimized. The time of operation of the functioning units are considered to...

In this paper, the impact of integrating photovoltaic plants (PVPs) with high penetration levels into the national utility grid of Egypt is demonstrated. Load flow analysis is used to examine the grid capacity in the case of integrating the desired P...

This paper proposes a novel adaptive optimization algorithm to solve the network reconfiguration and distributed generation (DG) placement problems with objective functions including power loss minimization and voltage stability index (VSI) improveme...

The pressboard surface is the electric weak link of the oil-paper insulation in transformers, and long-term partial discharge (PD) erosion is the dominant cause of degradation in pressboard. To explore the development processes of surface tracking un...

HVDC systems are becoming more common worldwide, specially in Brazil, since the adoption of such system for Itaipu’s hydroelectric complex in the 1980’s. Today, the country has the Xingu-Estreito bipole, with length of 2375 km. This syste...

This paper presents an assessment of the cost performance of CO2 capture technologies when retrofitted to a cement plant: MEA-based absorption, oxyfuel, chilled ammonia-based absorption (Chilled Ammonia Process), membrane-assisted CO2 liquefaction, a...

During an automatic power transmission line inspection, a large number of images are collected by unmanned aerial vehicles (UAVs) to detect existing defects in transmission line components, especially insulators. However, with twin insulator strings...