Eng | Articles Related to Green Engineering
Green engineering is no longer a vision. It is delivering concrete solutions across energy, materials, construction, and waste management. This collection covers the latest breakthroughs in bioplastics, biomass nanomaterials, direct air capture, industrial symbiosis, CO₂‑to‑fuel conversion, sustainable demolition, biochar‑modified asphalt, fertilizer decarbonization, wastewater treatment, and energy system optimization. Together, these papers offer both critical reviews and practical modeling tools to guide the transition toward a circular, low‑carbon economy. To keep you updated on the most impactful research in this field, Eng (ISSN 2673-4117) presents this selection of highly cited papers on green engineering published in 2024 and 2025. We hope that you find them both insightful and useful for your own work.
1. “The Journey of Plastics: Historical Development, Environmental Challenges, and the Emergence of Bioplastics for Single-Use Products”
by Jade Stanley, David Culliton, Antonio-Jonay Jovani-Sancho and Adriana Cunha Neves
Eng 2025, 6(1), 17; https://doi.org/10.3390/eng6010017
Available online at https://www.mdpi.com/2673-4117/6/1/17
Viewed by 24370+ | Cited by 69
2. “A Comprehensive Review on Various Phases of Wastewater Technologies: Trends and Future Perspectives”
by José Fernandes, Paulo J. Ramísio and Hélder Puga
Eng 2024, 5(4), 2633–2661; https://doi.org/10.3390/eng5040138
Available online at https://www.mdpi.com/2673-4117/5/4/138
Viewed by 26570+ | Cited by 111
3. “Recent Trends and Advancements in Green Synthesis of Biomass-Derived Carbon Dots”
by Muhammad Usman and Shuo Cheng
Eng 2024, 5(3), 2223–2263; https://doi.org/10.3390/eng5030116
Available online at https://www.mdpi.com/2673-4117/5/3/116
Viewed by 11540+ | Cited by 82
4. “Direct Air Capture (DAC) for Achieving Net-Zero CO2 Emissions: Advances, Applications, and Challenges”
by Guihe Li and Jia Yao
Eng 2024, 5(3), 1298–1336; https://doi.org/10.3390/eng5030069
Available online at https://www.mdpi.com/2673-4117/5/3/69
Viewed by 27710+ | Cited by 59
5. “Modeling Critical Success Factors for Industrial Symbiosis”
by Stamatios K. Chrysikopoulos, Panos T. Chountalas, Dimitrios A. Georgakellos and Athanasios G. Lagodimos
Eng 2024, 5(4), 2902–2919; https://doi.org/10.3390/eng5040151
Available online at https://www.mdpi.com/2673-4117/5/4/151
Viewed by 4680+ | Cited by 17
6. “Coupled Design and Operation Optimization for Decarbonization of Industrial Energy Systems Using an Open-Source In-House Tool”
by Rushit Kansara and María Isabel Roldán Serrano
Eng 2024, 5(4), 3033–3048; https://doi.org/10.3390/eng5040158
Available online at https://www.mdpi.com/2673-4117/5/4/158
Viewed by 3090+ | Cited by 8
7. “Advances in Concrete Demolition Technologies: A Review of Conventional and Emerging Methods for Sustainable Waste Management”
by Mohsen Mohammadi, Saman Mostafa Mohammad, Mehdi Roshanbin, Gilson R. Lomboy and Shahriar Abubakri
Eng 2024, 5(4), 3174–3191; https://doi.org/10.3390/eng5040167
Available online at https://www.mdpi.com/2673-4117/5/4/167
Viewed by 9800+ | Cited by 11
8. “Transforming CO2 into Synthetic Fuels: Modeling, Simulation, and Optimization Analysis of Methanol Production from Industrial Wastes”
by Vasiliki Kontou, Antonis Peppas, Sotiris Kottaridis, Chrysa Politi and Sotirios Karellas
Eng 2024, 5(3), 1337–1359; https://doi.org/10.3390/eng5030070
Available online at https://www.mdpi.com/2673-4117/5/3/70
Viewed by 4110+ | Cited by 11
9. “Biochar as Additive and Modifier in Bitumen and Asphalt Mixtures”
by Chathurika Dassanayake and Nuha S. Mashaan
Eng 2025, 6(12), 341; https://doi.org/10.3390/eng6120341
Available online at https://www.mdpi.com/2673-4117/6/12/341
Viewed by 4510+ | Cited by 15
10. “Decarbonizing Nitrogen Fertilizer for Agriculture with Nonthermal Plasma Technology”
by Xiaofei Philip Ye
Eng 2024, 5(3), 1823–1837; https://doi.org/10.3390/eng5030097
Available online at https://www.mdpi.com/2673-4117/5/3/97
Viewed by 4770+ | Cited by 9