Editorial Board
- Extractive Metallurgy Section
- Powder Metallurgy Section
- Corrosion and Protection Section
- Biobased and Biodegradable Metals Section
- Metal Casting, Forming and Heat Treatment Section
- Additive Manufacturing Section
- Metal Failure Analysis Section
- Computation and Simulation on Metals Section
- Entropic Alloys and Meta-Metals Section
- Welding and Joining Section
- Structural Integrity of Metals Section
- Metal Matrix Composites Section
- Crystallography and Applications of Metallic Materials Section
- Metallic Functional Materials Section
Please note that the order in which the Editors appear on this page is alphabetical, and follows the structure of the editorial board presented on the MDPI website under information for editors: editorial board responsibilities.
Members
School of Materials Science & Engineering, Zhejiang University, 38 Zheda Road, Hangzhou 310027, China
Interests: development of new methodologies for controlling the synthesis of noble-metal based nanocrystals; developing in-situ techniques (e.g., TEM) reveals the formation mechanism; building structure-property relationships guides the design and synthesis of novel nanocrystals with well-controlled shape, composition, and structure for energy applications.
Interests: development of new methodologies for controlling the synthesis of noble-metal based nanocrystals; developing in-situ techniques (e.g., TEM) reveals the formation mechanism; building structure-property relationships guides the design and synthesis of novel nanocrystals with well-controlled shape, composition, and structure for energy applications.
School of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, China
Interests: Mg alloys; extrusion; rolling; microstructure; mechanical property; corrosion behavior
Interests: Mg alloys; extrusion; rolling; microstructure; mechanical property; corrosion behavior
School of Engineering, Edith Cowan University, 270 Joondalup Drive, Perth, WA 6027, Australia
Interests: metal additive manufacturing; nanostructured materials; metallic biomaterials; heterogeneous catalysts; water treatment; advanced oxidation processes; metal corrosion; energy conversion
Special Issues, Collections and Topics in MDPI journals
Interests: metal additive manufacturing; nanostructured materials; metallic biomaterials; heterogeneous catalysts; water treatment; advanced oxidation processes; metal corrosion; energy conversion
Special Issues, Collections and Topics in MDPI journals
State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China
Interests: nonmetallic inclusions in steel; modeling of the transport phenomena during metallurgy process; thermodynamics and kinetics of metallurgical reactions
Special Issues, Collections and Topics in MDPI journals
Interests: nonmetallic inclusions in steel; modeling of the transport phenomena during metallurgy process; thermodynamics and kinetics of metallurgical reactions
Special Issues, Collections and Topics in MDPI journals
State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China
Interests: alloy design; CALPHAD; phase-field modeling; machine learning; light alloys (Al-, Mg-); Ni-based super alloys; high-entropy alloys
Special Issues, Collections and Topics in MDPI journals
Interests: alloy design; CALPHAD; phase-field modeling; machine learning; light alloys (Al-, Mg-); Ni-based super alloys; high-entropy alloys
Special Issues, Collections and Topics in MDPI journals
Department of Materials Science and Engineering, Zhejiang University, Hangzhou, China
Interests: silver-based materials; high-entropy materials; graphene reinforced composites
Special Issues, Collections and Topics in MDPI journals
Interests: silver-based materials; high-entropy materials; graphene reinforced composites
Special Issues, Collections and Topics in MDPI journals
Department of Chemical and Materials Engineering, University of Nevada, Reno, NV 89557, USA
Interests: processing-structure-property relationships in metals; advanced electron microscopy; additive manufacturing; novel alloys design
Interests: processing-structure-property relationships in metals; advanced electron microscopy; additive manufacturing; novel alloys design
Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China
Interests: corrosion and protection; flow accelerated corroion; erosion corrosion; cavitation erosion; corrosive wear
Special Issues, Collections and Topics in MDPI journals
Interests: corrosion and protection; flow accelerated corroion; erosion corrosion; cavitation erosion; corrosive wear
Special Issues, Collections and Topics in MDPI journals
Department of Materials Science and Nanotechnology, Belgorod State University,85 Pobeda str, 308015 Belgorod, Russia
Interests: deformation; grain refinement; phase transformation; titanium alloys; high-entropy alloys; interphase boundaries; grain boundaries; twinning, mechanical properties
Special Issues, Collections and Topics in MDPI journals
Interests: deformation; grain refinement; phase transformation; titanium alloys; high-entropy alloys; interphase boundaries; grain boundaries; twinning, mechanical properties
Special Issues, Collections and Topics in MDPI journals
School of Physics, Beihang University, Beijing 100191, China
Interests: irradiation damage; fusion metallic materials; irradiation-resistant materials design; hydrogen and helium effects; modelling and simulation
Interests: irradiation damage; fusion metallic materials; irradiation-resistant materials design; hydrogen and helium effects; modelling and simulation
Opus College of Engineering, Marquette University, 1515 W. Wisconsin Ave., Milwaukee, WI 53233, USA
Interests: physical metallurgy; phase transformation; creep and fatigue; additive manufacturing; hot isostatic pressing; lightweight alloys; superalloy
Special Issues, Collections and Topics in MDPI journals
Interests: physical metallurgy; phase transformation; creep and fatigue; additive manufacturing; hot isostatic pressing; lightweight alloys; superalloy
Special Issues, Collections and Topics in MDPI journals
Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming, China
Interests: stacking fault energy; mechanical properties; gradient structure; deformation mechanism
Special Issues, Collections and Topics in MDPI journals
Interests: stacking fault energy; mechanical properties; gradient structure; deformation mechanism
Special Issues, Collections and Topics in MDPI journals
Department of Mechanical and Aerospace Engineering, NC State University, Raleigh, NC 27695, USA
Interests: multiscale modeling and computational modeling; material defects and fracture mechanics; material behavior spanning nano to micro scales; dynamic behavior of structures and materials; experimental solid mechanics
Interests: multiscale modeling and computational modeling; material defects and fracture mechanics; material behavior spanning nano to micro scales; dynamic behavior of structures and materials; experimental solid mechanics
Institute of Materials Science, Joining and Forming, Graz University of Technology, 8010 Graz, Austria
Interests: joining technology; additive manufacturing; materials science; welding metallurgy; polymer welding; composites; metals and hybrid structures
Special Issues, Collections and Topics in MDPI journals
Interests: joining technology; additive manufacturing; materials science; welding metallurgy; polymer welding; composites; metals and hybrid structures
Special Issues, Collections and Topics in MDPI journals
Kroll Institute for Extractive Metallurgy, Mining Engineering Department & George S. Ansell Department of Metallurgical and Materials Engineering, Colorado School of Mines, Golden, CO 80401, USA
Interests: extractive metallurgy; mineral processing; waste minimization; recycling
Special Issues, Collections and Topics in MDPI journals
Interests: extractive metallurgy; mineral processing; waste minimization; recycling
Special Issues, Collections and Topics in MDPI journals
Department of Mechanical, Electrical, and Electronic Engineering, Interdisciplinary Faculty of Science and Engineering, Shimane University, 1060 Nishikawatsu-cho, Matsue, Shimane 690-8504, Japan
Interests: solid mechanics; elasticity; thermoelasticity; stress analysis; elastic wave propagation; anisotropic materials; piezoelectric materials; functionally graded materials
Interests: solid mechanics; elasticity; thermoelasticity; stress analysis; elastic wave propagation; anisotropic materials; piezoelectric materials; functionally graded materials
School of Mechanical and Mining Engineering, The University of Queensland, Brisbane Qld 4072, Australia
Interests: Mg corrosion; hydrogen embrittlenent; stress corrosion cracking
Interests: Mg corrosion; hydrogen embrittlenent; stress corrosion cracking
1. Faculdade de Ciências e Tecnologia (FCT), Campus de Gambelas, Universidade do Algarve, 8005-139 Faro, Portugal
2. CCMAR, Campus de Gambelas, Universidade do Algarve, 8005-139 Faro, Portugal
Interests: metals in molecular sciences; decavanadate biochemistry; polyoxometalates (POMs) interactions with proteins; POMs applications in environment and health
Special Issues, Collections and Topics in MDPI journals
2. CCMAR, Campus de Gambelas, Universidade do Algarve, 8005-139 Faro, Portugal
Interests: metals in molecular sciences; decavanadate biochemistry; polyoxometalates (POMs) interactions with proteins; POMs applications in environment and health
Special Issues, Collections and Topics in MDPI journals
College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China
Interests: blast furnace ironmaking; sintering or pelletizing of iron ore; structure of slag; moldeling of the matellurgical process; hydrogen metallurgy; recycle utilization of wastes; simulation of blast furnace; green process development
Interests: blast furnace ironmaking; sintering or pelletizing of iron ore; structure of slag; moldeling of the matellurgical process; hydrogen metallurgy; recycle utilization of wastes; simulation of blast furnace; green process development
Institute of Strength Physics and Materials Science, Siberian Branch, Russian Academy of Sciences, Tomsk 634055, Russia
Interests: mesomechanic; microstructure-based numerical simulation; metal-matrix composites; polycrystalline materials; strain localization; fracture; dynamic deformation; shock waves
Interests: mesomechanic; microstructure-based numerical simulation; metal-matrix composites; polycrystalline materials; strain localization; fracture; dynamic deformation; shock waves
Department of Materials Science and Engineering, Technion - Israel Institute of Technology, Haifa, Israel
Interests: selective laser melting; titanium alloy (TiAl6V4); inconel (trademark); high-entropy alloys; laves phases; laser cladding; cast alloys; die castings; eutectics
Special Issues, Collections and Topics in MDPI journals
Interests: selective laser melting; titanium alloy (TiAl6V4); inconel (trademark); high-entropy alloys; laves phases; laser cladding; cast alloys; die castings; eutectics
Special Issues, Collections and Topics in MDPI journals
Woodruff School of Mechanical Engineering, Georgia Tech-Lorraine, 57070 Metz, France
Interests: computational materials science; grain boundary migration,; grain growth; high-entropy alloys; additive manufacturing
Interests: computational materials science; grain boundary migration,; grain growth; high-entropy alloys; additive manufacturing
FEMTO-ST Institute, University of Franche-Comté, 24 chemin de l’epitaphe, 25030 BESANCON Cedex, France
Interests: polymer replication; micro-structuration; microfabrication; high loaded polymer
Interests: polymer replication; micro-structuration; microfabrication; high loaded polymer
Department of Civil, Structural and Environmental Engineering, School of Engineering and Applied Sciences, University at Buffalo, Amherst, NY, USA
Interests: failure and reliability analysis; material and interface modeling; nonlinear finite element analysis; damage mechanics; thermodynamics; entropy; unified mechanics
Interests: failure and reliability analysis; material and interface modeling; nonlinear finite element analysis; damage mechanics; thermodynamics; entropy; unified mechanics
Department of Civil and Mechanical Engineering, University of Cassino and Southern Lazio, 03043 Cassino, FR, Italy
Interests: mechanical behaviour of fibre metal laminates; damage assessment of additively manufactured metals; experimental characterization; finite element simulation
Interests: mechanical behaviour of fibre metal laminates; damage assessment of additively manufactured metals; experimental characterization; finite element simulation
Department of Industrial Engineering, Università degli Studi di Trento, Trento, Italy
Interests: printing; metal additive manufacturing; fatigue; finite element analysis; fracture mechanics; industrial engineering; materials; mechanical design; mechanical properties; residual stress; shot peening; structural integrity assessment; surface modification
Special Issues, Collections and Topics in MDPI journals
Interests: printing; metal additive manufacturing; fatigue; finite element analysis; fracture mechanics; industrial engineering; materials; mechanical design; mechanical properties; residual stress; shot peening; structural integrity assessment; surface modification
Special Issues, Collections and Topics in MDPI journals
National Research Council, Institute of Condensed Matter Chemistry and Technologies for Energy, Via G. Previati 1E, 23900 Lecco, Italy
Interests: National Research Council, Institute of Condensed Matter Chemistry and Technologies for Energy, Via G. Previati 1E, 23900 Lecco, Italy
Special Issues, Collections and Topics in MDPI journals
Interests: National Research Council, Institute of Condensed Matter Chemistry and Technologies for Energy, Via G. Previati 1E, 23900 Lecco, Italy
Special Issues, Collections and Topics in MDPI journals
Institute National de la Recherche Scientifique (Centre Eau, Terre et Environnement), Université du Québec, 490 rue de la Couronne, Québec, QC G1K 9A9, Canada
Interests: leaching; bioleaching; adsorption; metal; hydrometallurgy; mining residue; sludge; soil; wastewater; hazardous waste
Interests: leaching; bioleaching; adsorption; metal; hydrometallurgy; mining residue; sludge; soil; wastewater; hazardous waste
Laser Hall, LTm Team (Laser Materials Processing), IUT Physical Measurements Department, Université de Bourgogne, 12 rue de la Fonderie, 71200 Le Creusot, France
Interests: WAAM; selective laser melting; laser welding; dissimilar welding; numerical modeling; residual stresses; FEM; process modeling; CFD; MHD; gas flow / electric arc couplings; thermal spray
Interests: WAAM; selective laser melting; laser welding; dissimilar welding; numerical modeling; residual stresses; FEM; process modeling; CFD; MHD; gas flow / electric arc couplings; thermal spray
School of Engineering, University of Waikato, Private Bag 3105, Hamilton 3240, New Zealand
Interests: engineering; materials and processing; near-net-shape manufacturing; powder metallurgy; casting; light metals; high entropy alloys; mechanical behaviour of materials; processing-microstructure-properties relationships; functionalised materials; advanced materials characterisation; sustainable materials
Interests: engineering; materials and processing; near-net-shape manufacturing; powder metallurgy; casting; light metals; high entropy alloys; mechanical behaviour of materials; processing-microstructure-properties relationships; functionalised materials; advanced materials characterisation; sustainable materials
