Editorial Board
- Extractive Metallurgy Section
- Powder Metallurgy Section
- Corrosion and Protection Section
- Biobased and Biodegradable Metals Section
- Metal Casting, Forming and Heat Treatment Section
- Additive Manufacturing Section
- Metal Failure Analysis Section
- Computation and Simulation on Metals Section
- Entropic Alloys and Meta-Metals Section
- Welding and Joining Section
- Structural Integrity of Metals Section
- Metal Matrix Composites Section
- Crystallography and Applications of Metallic Materials Section
- Metallic Functional Materials Section
Please note that the order in which the Editors appear on this page is alphabetical, and follows the structure of the editorial board presented on the MDPI website under information for editors: editorial board responsibilities.
Members
Department of Materials Science and Engineering, Universidad Carlos III de Madrid, IAAB, Avda. Universidad, 30, 28911 Leganés, Spain
Interests: metals and metallurgy; powder metallurgy; coatings; additive manufacturing; metals processing and characterization; metal–ceramic composites; materials in art
Special Issues, Collections and Topics in MDPI journals
Interests: metals and metallurgy; powder metallurgy; coatings; additive manufacturing; metals processing and characterization; metal–ceramic composites; materials in art
Special Issues, Collections and Topics in MDPI journals
Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11020 Belgrade, Serbia
Interests: Intrinsically conducting polymers, electrochemical synthesis, electrochemical characterisation, corrosion, electrode materials
Special Issues, Collections and Topics in MDPI journals
Interests: Intrinsically conducting polymers, electrochemical synthesis, electrochemical characterisation, corrosion, electrode materials
Special Issues, Collections and Topics in MDPI journals
School of Materials Science & Engineering, Zhejiang University, Zijingang Campus, Hangzhou 310058, China
Interests: coatings; energy storage materials
Special Issues, Collections and Topics in MDPI journals
Interests: coatings; energy storage materials
Special Issues, Collections and Topics in MDPI journals
State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, China
Interests: nanoscaled metallic materials; metal matrix composites
Interests: nanoscaled metallic materials; metal matrix composites
Department of Physical Science and Engineering, Nagoya Institute of Technology, Gokiso, Nagoya, Aichi 466-8555, Japan
Interests: mechanical properties of metallic materials; light metal alloys (Mg, Al, Ti)
Interests: mechanical properties of metallic materials; light metal alloys (Mg, Al, Ti)
Departamento de Ingeniería Química y Ambiental, Universidad Técnica Federico Santa María, Avenida España 1680, 2390123 Valparaíso, Chile
Interests: electrochemistry; electrochemical processes applied to environmental problems; iron nanoparticles; material characterization; heavy metal removal; separation processes
Interests: electrochemistry; electrochemical processes applied to environmental problems; iron nanoparticles; material characterization; heavy metal removal; separation processes
Department of Engineering Mechanics, Dalian University of Technology, Dalian 116034, China
Interests: structural and multidisciplinary optimization; reliability analysis and design optimization; buckling, collapse and failure analysis; composite structures; data-driven computational mechanics; applications in aerospace and aircraft structures
Special Issues, Collections and Topics in MDPI journals
Interests: structural and multidisciplinary optimization; reliability analysis and design optimization; buckling, collapse and failure analysis; composite structures; data-driven computational mechanics; applications in aerospace and aircraft structures
Special Issues, Collections and Topics in MDPI journals
Department of Materials Science and Engineering, Texas A&M University College of Engineering, College Station, TX 77840, USA
Interests: severe plastic deformation processing; ECAE; thermal mechanical processing; refractory metals; electrical conductors; cryogenic materials; applied superconductivity
Interests: severe plastic deformation processing; ECAE; thermal mechanical processing; refractory metals; electrical conductors; cryogenic materials; applied superconductivity
School of Engineering, Technology and Design, Canterbury Christ Church University, Canterbury CT1 1QU, UK
Interests: additive manufacturing (laser powder bed fusion, stereolithography, fused deposition modelling, binder jetting); microfabrication; design of experiments; CAD, FEA, MATLAB; process optimisation; materials processing; metrology and mechanical testing; product development; design for manufacturing; advanced microscopy; X-ray diffraction analysis; image analysis
Special Issues, Collections and Topics in MDPI journals
Interests: additive manufacturing (laser powder bed fusion, stereolithography, fused deposition modelling, binder jetting); microfabrication; design of experiments; CAD, FEA, MATLAB; process optimisation; materials processing; metrology and mechanical testing; product development; design for manufacturing; advanced microscopy; X-ray diffraction analysis; image analysis
Special Issues, Collections and Topics in MDPI journals
1. Institute of Product & Process Innovation, Leuphana University Lüneburg, D-21335 Lüneburg, Germany
2. Functional Magnesium Materials, Institute of Metallic Biomaterials, Helmholtz-Zentrum Hereon, 21502 Geesthacht, Germany
Interests: magnesium; castability; biomaterial; alloy development
Special Issues, Collections and Topics in MDPI journals
2. Functional Magnesium Materials, Institute of Metallic Biomaterials, Helmholtz-Zentrum Hereon, 21502 Geesthacht, Germany
Interests: magnesium; castability; biomaterial; alloy development
Special Issues, Collections and Topics in MDPI journals
Director of the Competence Centre for Additive Manufacturing - Metal (CAM2), Division of Materials and Manufacture, Industrial and Materials Science, Chalmers University of Technology, SE-41296 Gothenburg, Sweden
Interests: metal additive manufacturing and powder metallurgy; metal powder development for AM; novel materials for AM; quality assurance in AM
Special Issues, Collections and Topics in MDPI journals
Interests: metal additive manufacturing and powder metallurgy; metal powder development for AM; novel materials for AM; quality assurance in AM
Special Issues, Collections and Topics in MDPI journals
Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
Interests: first-principles calculations; alloys; coatings; corrosion; oxidation; friction
Interests: first-principles calculations; alloys; coatings; corrosion; oxidation; friction
National Center for Scientific Research (CNRS), Unité Matériaux et Transformations, F-59000 Lille, France
Interests: metal matrix composites; interface engineering; microstructure and interface characterization; electron microscopy
Interests: metal matrix composites; interface engineering; microstructure and interface characterization; electron microscopy
Hong Kong Centre for Cerebro-Cardiovascular Health Engineering (COCHE), City University of Hong Kong, Hong Kong SAR 999077, China
Interests: machine learning; computation; biosensor; nanotechnology; micro fabrication
Interests: machine learning; computation; biosensor; nanotechnology; micro fabrication
Department of Advanced Materials, Changwon National University, 20 Changwondaehak-ro, Changwon-si 51140, Republic of Korea
Interests: superalloys; directional and single crystal solidification; alloy design of superalloys; microstructural evolution; mechanical behaviour of materials; failure investigation; root cause analysis and etc
Interests: superalloys; directional and single crystal solidification; alloy design of superalloys; microstructural evolution; mechanical behaviour of materials; failure investigation; root cause analysis and etc
Department of Materials Science and Engineering, Pusan National University, Busan 46241, Republic of Korea
Interests: hydrogen delayed fracture of high strength steels and high entropy alloys (HEAs); additive manufacturing of Ni and Ti alloys; weldability of high Mn steels and HEAs; finite element and thermodynamical
Interests: hydrogen delayed fracture of high strength steels and high entropy alloys (HEAs); additive manufacturing of Ni and Ti alloys; weldability of high Mn steels and HEAs; finite element and thermodynamical
Hopkins Extreme Materials Institute, Johns Hopkins University, 3400 North Charles Street, Baltimore, MD 21218, USA
Interests: materials processing; severe plastic deformation; mechanical alloying; equal channel angular extrusion; asymmetric rolling; microstructure; dynamic deformation properties and behavior; additive manufacturing
Special Issues, Collections and Topics in MDPI journals
Interests: materials processing; severe plastic deformation; mechanical alloying; equal channel angular extrusion; asymmetric rolling; microstructure; dynamic deformation properties and behavior; additive manufacturing
Special Issues, Collections and Topics in MDPI journals
School of Materials Science and Engineering, Andong National University, 1375 Gyeongdong-ro, Andong, Gyeongbuk, 36729, Korea
Interests: corrosion; steel; microstructure; metal
Interests: corrosion; steel; microstructure; metal
Faculty of Applied Sciences and Mechatronics, Hochschule München University of Applied Sciences, 80335 Munich, Germany
Interests: precious metals; additive manufacturing; phase diagrams and CALPHAD; joining technology; biodegradable alloys; bulk metallic glasses; investment casting
Interests: precious metals; additive manufacturing; phase diagrams and CALPHAD; joining technology; biodegradable alloys; bulk metallic glasses; investment casting
1. Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, 565-0871 Suita, Japan
2. Anisotropic Design & Additive Manufacturing Research Center, Graduate School of Engineering, Osaka University, 565-0871 Suita, Japan
Interests: additive manufacturing; microstructure; structural materials; 4D printing; computer simulation; materials processing; strength of materials
Special Issues, Collections and Topics in MDPI journals
2. Anisotropic Design & Additive Manufacturing Research Center, Graduate School of Engineering, Osaka University, 565-0871 Suita, Japan
Interests: additive manufacturing; microstructure; structural materials; 4D printing; computer simulation; materials processing; strength of materials
Special Issues, Collections and Topics in MDPI journals
Institute of Strength Physics and Materials Science, Siberian Branch of Russian Academy of Sciences, 634055 Tomsk, Russian
Interests: electron beam additive manufacturing; non-stational local metallurgy; friction; wear; direct energy deposition; friction stir welding; friction stir processing; composite materials
Special Issues, Collections and Topics in MDPI journals
Interests: electron beam additive manufacturing; non-stational local metallurgy; friction; wear; direct energy deposition; friction stir welding; friction stir processing; composite materials
Special Issues, Collections and Topics in MDPI journals
Energy Systems Laboratory, General Department, National & Kapodistrian University of Athens, Euripus Campus, 34400 Evia, Greece
Interests: teaching and learning; pedagogy and education; magnetization processes; magnetic materials; measurement technology; RES microgrids; optimization and forecasting
Special Issues, Collections and Topics in MDPI journals
Interests: teaching and learning; pedagogy and education; magnetization processes; magnetic materials; measurement technology; RES microgrids; optimization and forecasting
Special Issues, Collections and Topics in MDPI journals
1. Department of Structural, Geotechnical and Building Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Turin, Italy
2. European Academy of Sciences, Engineering Division, Brussels, Belgium
Interests: acoustic, electromagnetic, and particle emission energy; acoustic emission methods for damage identification; concrete, masonry and rocks; cracking evolution in masonry arch bridges; creep behavior of concrete structures; critical phenomena from structural mechanics to geophysics; damage diagnosis in structures and construction materials; mechanics of proteins and macro-molecular structures; microcracking fracture propagation; static and dynamic analysis of high-rise buildings
Special Issues, Collections and Topics in MDPI journals
2. European Academy of Sciences, Engineering Division, Brussels, Belgium
Interests: acoustic, electromagnetic, and particle emission energy; acoustic emission methods for damage identification; concrete, masonry and rocks; cracking evolution in masonry arch bridges; creep behavior of concrete structures; critical phenomena from structural mechanics to geophysics; damage diagnosis in structures and construction materials; mechanics of proteins and macro-molecular structures; microcracking fracture propagation; static and dynamic analysis of high-rise buildings
Special Issues, Collections and Topics in MDPI journals
Laboratory of Microstructures and Materials Mechanics (LEM3), Université de Lorraine, CNRS, Arts et Métiers ParisTech, F-57000 Metz, France
Interests: self-organization phenomena in plasticity; plastic instabilities; metal alloys; relationships between mechanical and physical (magnetic, electronic) properties
Special Issues, Collections and Topics in MDPI journals
Interests: self-organization phenomena in plasticity; plastic instabilities; metal alloys; relationships between mechanical and physical (magnetic, electronic) properties
Special Issues, Collections and Topics in MDPI journals
Department of Materials Science and Engineering, Seoul National University of Science and Technology, Seoul 139-743, Republic of Korea
Interests: Cu particles; sintering; metal nanoparticle; conductive paste/film; solder alloy; bonding
Interests: Cu particles; sintering; metal nanoparticle; conductive paste/film; solder alloy; bonding
Department of Nanotechnology and Advanced Materials Engineering, Sejong University, Seoul 05006, Republic of Korea
Interests: nanocomposites; materials design; phase transformation; powder metallurgy
Special Issues, Collections and Topics in MDPI journals
Interests: nanocomposites; materials design; phase transformation; powder metallurgy
Special Issues, Collections and Topics in MDPI journals
ISIS Sensorial Materials Scientific Centre, University of Bremen, 28359 Bremen, Germany
Interests: porous and cellular metals; metal foams; syntactic foams; metal matrix syntactic foams; metal matrix composites; powder metallurgy; powder technology; finite element analysis; integrated computational materials engineering (ICME); smart structures; sensor integration; sensorial materials; structural health monitoring (SHM)
Special Issues, Collections and Topics in MDPI journals
Interests: porous and cellular metals; metal foams; syntactic foams; metal matrix syntactic foams; metal matrix composites; powder metallurgy; powder technology; finite element analysis; integrated computational materials engineering (ICME); smart structures; sensor integration; sensorial materials; structural health monitoring (SHM)
Special Issues, Collections and Topics in MDPI journals
State Key laboratory of powder metallurgy, Central South University, Changsha 410083, China
Interests: additive manufacturing; spark plasma sintering; powder metallurgy
Interests: additive manufacturing; spark plasma sintering; powder metallurgy
Department of Materials Physics and Chemistry, School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China
Interests: fatigue; fracture; deformation; strengthening and toughening; microstructure; grain boundary engineering; quantitative fractography; metallic materials; natural biological materials; biomedical materials
Special Issues, Collections and Topics in MDPI journals
Interests: fatigue; fracture; deformation; strengthening and toughening; microstructure; grain boundary engineering; quantitative fractography; metallic materials; natural biological materials; biomedical materials
Special Issues, Collections and Topics in MDPI journals
Academy for Advanced Interdisciplinary Studies and Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen 518055, China
Interests: metal powder; melt atomization; additive manufacturing; hot isostatic pressing; process modeling and simulation
Interests: metal powder; melt atomization; additive manufacturing; hot isostatic pressing; process modeling and simulation
