Editorial Board
- Extractive Metallurgy Section
- Powder Metallurgy Section
- Corrosion and Protection Section
- Biobased and Biodegradable Metals Section
- Metal Casting, Forming and Heat Treatment Section
- Additive Manufacturing Section
- Metal Failure Analysis Section
- Computation and Simulation on Metals Section
- Entropic Alloys and Meta-Metals Section
- Welding and Joining Section
- Structural Integrity of Metals Section
- Metal Matrix Composites Section
- Crystallography and Applications of Metallic Materials Section
- Metallic Functional Materials Section
Please note that the order in which the Editors appear on this page is alphabetical, and follows the structure of the editorial board presented on the MDPI website under information for editors: editorial board responsibilities.
Members
Institute of Mechanics and Engineering, University of Bordeaux, 33000 Bordeaux, France
Interests: stress corrosion cracking; fatigue-corrosion; Electrochemical Impedance Spectroscopy (EIS); passive film; additive manufacturing; corrosion
Interests: stress corrosion cracking; fatigue-corrosion; Electrochemical Impedance Spectroscopy (EIS); passive film; additive manufacturing; corrosion
Department of Engineering, University of Messina, Contrada di Dio 1, 98166 Messina, Italy
Interests: additive manufacturing; joining; friction stir welding; dissimilar Materials; composites; FEA
Special Issues, Collections and Topics in MDPI journals
Interests: additive manufacturing; joining; friction stir welding; dissimilar Materials; composites; FEA
Special Issues, Collections and Topics in MDPI journals
Dipartimento di Ingegneria, Università di Perugia, Via G. Duranti 93, 06125 Perugia, Italy
Interests: steels; microstructure; properties; additive materials
Special Issues, Collections and Topics in MDPI journals
Interests: steels; microstructure; properties; additive materials
Special Issues, Collections and Topics in MDPI journals
CNRS, Laboratoire de Mécanique des Solides, Ecole Polytechnique, Institut Polytechnique de Paris, CEDEX, 91128 Palaiseau, France
Interests: plastic flow mechanisms; multiaxial fatigue; mixed-mode fatigue crack growth; severe plastic deformation; ductile fracture; mechanical twinning; grain boundary sliding; ultrafine grained metals; micromechanical modelling
Special Issues, Collections and Topics in MDPI journals
Interests: plastic flow mechanisms; multiaxial fatigue; mixed-mode fatigue crack growth; severe plastic deformation; ductile fracture; mechanical twinning; grain boundary sliding; ultrafine grained metals; micromechanical modelling
Special Issues, Collections and Topics in MDPI journals
Institute for Advanced Materials Technology, University of Science and Technology Beijing, Beijing 100083, China
Interests: corrosion and protection
Interests: corrosion and protection
Materials processing and Modelling Group, SINTEF Industry, Forskningsveien 1, NO-0314, Oslo, Norway
Interests: through process modelling of Al alloys fabrication; microstructure modeling; computational thermodynamics and diffusion; simulation software development; additive manufacturing; Al alloys
Interests: through process modelling of Al alloys fabrication; microstructure modeling; computational thermodynamics and diffusion; simulation software development; additive manufacturing; Al alloys
School of Materials Science and Engineering, Shenyang Aerospace University, Shenyang 110136, China
Interests: medium/high-entropy alloy; amorphous alloy; magnesium alloy
Interests: medium/high-entropy alloy; amorphous alloy; magnesium alloy
Laboratory of Surface Forces, A.N.Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences, Leninsky Prospect 31 bldg. 4, 119071 Moscow, Russia
Interests: surface treatments; interfacial characterization; wear and corrosion; protective coatings and films; wetting and spreading; laser surface modification; superhydrophobicity; antiicing
Interests: surface treatments; interfacial characterization; wear and corrosion; protective coatings and films; wetting and spreading; laser surface modification; superhydrophobicity; antiicing
Department of Engineering, University of Messina, 98166 Messina, Italy
Interests: lightweight structures; aluminium foam sandwich; aluminium honeycomb sandwich; microlattice structures; computed tomography; non-destructive evaluation
Interests: lightweight structures; aluminium foam sandwich; aluminium honeycomb sandwich; microlattice structures; computed tomography; non-destructive evaluation
Department of Surface Engineering, Corrosion and Durability, National Centre for Metallurgical Research CENIM-CSIC, 28040 Madrid, Spain
Interests: corrosion; electrochemistry; magnesium; hydrogen evolution; steel
Interests: corrosion; electrochemistry; magnesium; hydrogen evolution; steel
BCAST, Brunel University London, Uxbridge UB8 3PH, UK
Interests: atomistic molecular dynamics simulations; first-principles density-functional theory modeling; thermodynamics of materials; solidification of metallic materials; structural and physical properties of metal materials; half-metallic materials and spintronics
Special Issues, Collections and Topics in MDPI journals
Interests: atomistic molecular dynamics simulations; first-principles density-functional theory modeling; thermodynamics of materials; solidification of metallic materials; structural and physical properties of metal materials; half-metallic materials and spintronics
Special Issues, Collections and Topics in MDPI journals
SIMaP Laboratory, Grenoble-Alpes University, BP 75, 38402 Saint Martin d’Hères CEDEX, France
Interests: electromagnetic/magnetic processing of materials; solidification under magnetic fields
Special Issues, Collections and Topics in MDPI journals
Interests: electromagnetic/magnetic processing of materials; solidification under magnetic fields
Special Issues, Collections and Topics in MDPI journals
Centro Nacional de Investigaciones Metalúrgicas CSIC, Avda. Gregorio del Amo 8, 28040 Madrid, Spain
Interests: magnesium alloys; corrosion; surface chemistry; electrochemistry; XPS; EIS
Special Issues, Collections and Topics in MDPI journals
Interests: magnesium alloys; corrosion; surface chemistry; electrochemistry; XPS; EIS
Special Issues, Collections and Topics in MDPI journals
US Department of Energy's Oak Ridge National Laboratory, Oak Ridge, TN 37830, USA
Interests: integrated computational welding engineering (ICWE); residual stress control; friction stir welding; dissimilar material joining; advanced neutron and synchrotron scattering
Interests: integrated computational welding engineering (ICWE); residual stress control; friction stir welding; dissimilar material joining; advanced neutron and synchrotron scattering
Department of Engineering and Management, University of Padova, Stradella San Nicola 3, 36100 Vicenza, Italy
Interests: raw materials; structural integrity of welded joints and additively manufactured components; welding and heat treatment simulation; cast iron; stainless steels; material selection
Special Issues, Collections and Topics in MDPI journals
Interests: raw materials; structural integrity of welded joints and additively manufactured components; welding and heat treatment simulation; cast iron; stainless steels; material selection
Special Issues, Collections and Topics in MDPI journals
Department of Condensed Matter Physics, University of Seville, 41080 Seville, Spain
Interests: magnetic materials for energy applications; soft magnetic materials; thermomagnetic phase transitions; caloric effects
Special Issues, Collections and Topics in MDPI journals
Interests: magnetic materials for energy applications; soft magnetic materials; thermomagnetic phase transitions; caloric effects
Special Issues, Collections and Topics in MDPI journals
Research Group Powder Metallurgy (Head), Division Chemical Technologies, Institute of Chemical Technologies, TU Wien, 1060 Vienna, Austria
Interests: sintering of steels; thermal analysis for process control; sintering of special PM materials (aluminum alloys, heavy metal, copper alloys); additive manufacturing with binder-based methods
Special Issues, Collections and Topics in MDPI journals
Interests: sintering of steels; thermal analysis for process control; sintering of special PM materials (aluminum alloys, heavy metal, copper alloys); additive manufacturing with binder-based methods
Special Issues, Collections and Topics in MDPI journals
Materials Science and Engineering Department, Universidad Carlos III de Madrid, 28911 Leganés, Spain
Interests: structural PM alloys; ODS steels for nuclear applications; superalloys processed by PM; liquid phase sintering; low alloyed sintered steels; powders for additive manufacturing
Interests: structural PM alloys; ODS steels for nuclear applications; superalloys processed by PM; liquid phase sintering; low alloyed sintered steels; powders for additive manufacturing
Department of Chemical Engineering, Physical Chemistry and Materials Science, University of Huelva (Spain), E.T.S. Ingeniería, Avda. Tres de Marzo s/n, 21071 Huelva, Spain.
Interests: powder metallurgy; mechanical alloying; sintering; field assisted sintering; amorphous materials; effective properties of porous materials; modeling of effective properties
Special Issues, Collections and Topics in MDPI journals
Interests: powder metallurgy; mechanical alloying; sintering; field assisted sintering; amorphous materials; effective properties of porous materials; modeling of effective properties
Special Issues, Collections and Topics in MDPI journals
Department of Materials Science and Engineering, Universidad Carlos III de Madrid, IAAB, Avda. Universidad, 30, 28911 Leganés, Spain
Interests: metals and metallurgy; powder metallurgy; coatings; additive manufacturing; metals processing and characterization; metal–ceramic composites; materials in art
Special Issues, Collections and Topics in MDPI journals
Interests: metals and metallurgy; powder metallurgy; coatings; additive manufacturing; metals processing and characterization; metal–ceramic composites; materials in art
Special Issues, Collections and Topics in MDPI journals
Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11020 Belgrade, Serbia
Interests: Intrinsically conducting polymers, electrochemical synthesis, electrochemical characterisation, corrosion, electrode materials
Special Issues, Collections and Topics in MDPI journals
Interests: Intrinsically conducting polymers, electrochemical synthesis, electrochemical characterisation, corrosion, electrode materials
Special Issues, Collections and Topics in MDPI journals
School of Materials Science & Engineering, Zhejiang University, Zijingang Campus, Hangzhou 310058, China
Interests: coatings; energy storage materials
Special Issues, Collections and Topics in MDPI journals
Interests: coatings; energy storage materials
Special Issues, Collections and Topics in MDPI journals
State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, China
Interests: nanoscaled metallic materials; metal matrix composites
Interests: nanoscaled metallic materials; metal matrix composites
Department of Physical Science and Engineering, Nagoya Institute of Technology, Gokiso, Nagoya, Aichi 466-8555, Japan
Interests: mechanical properties of metallic materials; light metal alloys (Mg, Al, Ti)
Interests: mechanical properties of metallic materials; light metal alloys (Mg, Al, Ti)
Departamento de Ingeniería Química y Ambiental, Universidad Técnica Federico Santa María, Avenida España 1680, 2390123 Valparaíso, Chile
Interests: electrochemistry; electrochemical processes applied to environmental problems; iron nanoparticles; material characterization; heavy metal removal; separation processes
Interests: electrochemistry; electrochemical processes applied to environmental problems; iron nanoparticles; material characterization; heavy metal removal; separation processes
Department of Engineering Mechanics, Dalian University of Technology, Dalian 116034, China
Interests: structural and multidisciplinary optimization; reliability analysis and design optimization; buckling, collapse and failure analysis; composite structures; data-driven computational mechanics; applications in aerospace and aircraft structures
Special Issues, Collections and Topics in MDPI journals
Interests: structural and multidisciplinary optimization; reliability analysis and design optimization; buckling, collapse and failure analysis; composite structures; data-driven computational mechanics; applications in aerospace and aircraft structures
Special Issues, Collections and Topics in MDPI journals
Department of Materials Science and Engineering, Texas A&M University College of Engineering, College Station, TX 77840, USA
Interests: severe plastic deformation processing; ECAE; thermal mechanical processing; refractory metals; electrical conductors; cryogenic materials; applied superconductivity
Interests: severe plastic deformation processing; ECAE; thermal mechanical processing; refractory metals; electrical conductors; cryogenic materials; applied superconductivity
School of Engineering, Technology and Design, Canterbury Christ Church University, Canterbury CT1 1QU, UK
Interests: additive manufacturing (laser powder bed fusion, stereolithography, fused deposition modelling, binder jetting); microfabrication; design of experiments; CAD, FEA, MATLAB; process optimisation; materials processing; metrology and mechanical testing; product development; design for manufacturing; advanced microscopy; X-ray diffraction analysis; image analysis
Special Issues, Collections and Topics in MDPI journals
Interests: additive manufacturing (laser powder bed fusion, stereolithography, fused deposition modelling, binder jetting); microfabrication; design of experiments; CAD, FEA, MATLAB; process optimisation; materials processing; metrology and mechanical testing; product development; design for manufacturing; advanced microscopy; X-ray diffraction analysis; image analysis
Special Issues, Collections and Topics in MDPI journals
1. Institute of Product & Process Innovation, Leuphana University Lüneburg, D-21335 Lüneburg, Germany
2. Functional Magnesium Materials, Institute of Metallic Biomaterials, Helmholtz-Zentrum Hereon, 21502 Geesthacht, Germany
Interests: magnesium; castability; biomaterial; alloy development
Special Issues, Collections and Topics in MDPI journals
2. Functional Magnesium Materials, Institute of Metallic Biomaterials, Helmholtz-Zentrum Hereon, 21502 Geesthacht, Germany
Interests: magnesium; castability; biomaterial; alloy development
Special Issues, Collections and Topics in MDPI journals
Director of the Competence Centre for Additive Manufacturing - Metal (CAM2), Division of Materials and Manufacture, Industrial and Materials Science, Chalmers University of Technology, SE-41296 Gothenburg, Sweden
Interests: metal additive manufacturing and powder metallurgy; metal powder development for AM; novel materials for AM; quality assurance in AM
Special Issues, Collections and Topics in MDPI journals
Interests: metal additive manufacturing and powder metallurgy; metal powder development for AM; novel materials for AM; quality assurance in AM
Special Issues, Collections and Topics in MDPI journals
