applsci-logo

Journal Browser

Journal Browser

Editorial Board Members' Collection Series: Electromagnetics and Communication

A special issue of Applied Sciences (ISSN 2076-3417). This special issue belongs to the section "Electrical, Electronics and Communications Engineering".

Deadline for manuscript submissions: closed (20 April 2024) | Viewed by 4745

Special Issue Editors

Department of Electrical and Information Engineering “Maurizio Scarano”, University of Cassino and Southern Lazio, Via G. Di Biasio 43, 03043 Cassino, FR, Italy
Interests: analytical–numerical methods for electromagnetics; electromagnetic diffraction and scattering; waveguide and optical waveguide; microwave circuits and antennas
Special Issues, Collections and Topics in MDPI journals

E-Mail Website
Guest Editor
CMEMS–UMinho, University of Minho, 4800-058 Guimarães, Portugal
Interests: microsystems; RF microelectronics; wireless sensor networks; biomedical devices; antennas; neural interfaces; wireless power
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

We are pleased to announce the forthcoming Special Issue, entitled “Editorial Board Members' Collection Series: Electromagnetics and Communication”, which will collect papers authored by highly qualified researchers invited by Editorial Board Members, who are experts in their fields.

The aim is to provide a venue for networking and communication between Applied Sciences and scholars in the fields of computational electromagnetics, microwave and millimeter-wave remote sensing, wireless/underwater communications and networking, and related areas. All papers will be published in fully open access after peer review.

Prof. Dr. Mario Lucido
Dr. Paulo M. Mendes
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Applied Sciences is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2400 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Benefits of Publishing in a Special Issue

  • Ease of navigation: Grouping papers by topic helps scholars navigate broad scope journals more efficiently.
  • Greater discoverability: Special Issues support the reach and impact of scientific research. Articles in Special Issues are more discoverable and cited more frequently.
  • Expansion of research network: Special Issues facilitate connections among authors, fostering scientific collaborations.
  • External promotion: Articles in Special Issues are often promoted through the journal's social media, increasing their visibility.
  • e-Book format: Special Issues with more than 10 articles can be published as dedicated e-books, ensuring wide and rapid dissemination.

Further information on MDPI's Special Issue polices can be found here.

Published Papers (3 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

12 pages, 3736 KiB  
Article
A Low-Cost Printed Log-Periodic Dipole Array for DVB-T2 Digital TV Applications
by Giovanni Andrea Casula, Giacomo Muntoni, Paolo Maxia and Giorgio Montisci
Appl. Sci. 2024, 14(1), 451; https://doi.org/10.3390/app14010451 - 4 Jan 2024
Viewed by 1321
Abstract
A printed log-periodic dipole array (LPDA) for DVB-T2 Digital TV applications, covering the whole DVB-T2 UHF band from Channel 21 to Channel 69 (470 MHz–860 MHz), is presented. The presented antenna offers a compact size and a lower cost compared to both wire [...] Read more.
A printed log-periodic dipole array (LPDA) for DVB-T2 Digital TV applications, covering the whole DVB-T2 UHF band from Channel 21 to Channel 69 (470 MHz–860 MHz), is presented. The presented antenna offers a compact size and a lower cost compared to both wire and similar printed LPDAs, with a normalized area of only 0.26 λ2 (where λ is the free-space wavelength at the central frequency) and a similar (or higher) average gain. It is composed of meandered radiating dipoles, and it is implemented on FR4, the cheapest dielectric substrate available on the market. Moreover, the antenna size has been reduced to an A4 sheet dimension (210 mm × 297 mm) to cut down the production cost. The antenna has been designed starting from Carrel’s theory and using a general-purpose 3D CAD, CST Studio Suite. The results show that the proposed antenna can be used for broadband applications (≈74% bandwidth) in the whole operating frequency band of Digital TV, with a satisfactory end-fire radiation pattern, a stable gain, and a radiation efficiency over the required frequency range (average values 6.56 dB and 97%, respectively). Full article
Show Figures

Figure 1

13 pages, 3774 KiB  
Article
Radio Link Model for Node Deployment in Underground Mine Sensor Networks
by Saleem Shahid, Hijab Zahra, Saad Bin Qaisar, Ijaz Haider Naqvi, Syed Muzahir Abbas and Subhas Mukhopadhyay
Appl. Sci. 2023, 13(15), 8987; https://doi.org/10.3390/app13158987 - 5 Aug 2023
Cited by 2 | Viewed by 1208
Abstract
This paper presents an experimental characterization of the proposed radio link model for an underground mine sensor network. Power efficiency and range are critical factors to consider when designing a wireless sensor network, particularly for low data rate applications where the goal is [...] Read more.
This paper presents an experimental characterization of the proposed radio link model for an underground mine sensor network. Power efficiency and range are critical factors to consider when designing a wireless sensor network, particularly for low data rate applications where the goal is to have a long-lasting, low-maintenance network. A ‘deploy and forget’ strategy is desirable because it allows the network to operate autonomously without requiring frequent maintenance or intervention from network operators. DASH7 and IEEE 802.15.4f are both excellent choices for low-power, long-range wireless sensor networking applications. The proposed radio link model was developed and evaluated for 433 MHz DASH7 in underground mines, considering the practical electromagnetic properties of mine walls and the propagation medium, which helps in calculating accurate signal characteristics. Radio wave propagation is a critical factor that needs to be considered when designing a wireless sensor network for complex mine structures. The received signal strength indicator (RSSI) and packet error rate (PER) are two key parameters that are used to measure wave propagation and assess the quality of the radio link between sensor nodes. The radio link design has been optimized for complex mine structures by utilizing these parameters in a model, leading to improved performance and reliability. The measurements were carried out in the world’s second largest salt mine at Khewra, Pakistan, with representative irregular mine structures. The RSSI and PER were measured at different node positions and with variable separation between the nodes. The proposed model allows for the easy placement of nodes on either the rooftop or near the side walls of the mine corridors, with an average variation of 6% in RSSI and 1.9% in PER. The proposed model was validated using off-the-shelf wizzi sensor nodes received from Wizzi Lab, France, and was programmed to measure RSSI and PER while operating under the 433 MHz DASH7 protocol. An agreement between modeled and measured parameters has been noted, making the proposed model a decent method for efficient node deployment in underground mine sensor networks. Full article
Show Figures

Figure 1

15 pages, 1382 KiB  
Article
A Simple and Low-Cost Technique for 5G Conservative Human Exposure Assessment
by Fulvio Schettino, Gaetano Chirico, Ciro D’Elia, Mario Lucido, Daniele Pinchera and Marco Donald Migliore
Appl. Sci. 2023, 13(6), 3524; https://doi.org/10.3390/app13063524 - 9 Mar 2023
Cited by 2 | Viewed by 1679
Abstract
The purpose of this paper is to introduce a simple, low-cost methodology for estimating a conservative value of the maximum field level that can be radiated by a 5G base station useful for human exposure assessment. The method is based on a Maximum [...] Read more.
The purpose of this paper is to introduce a simple, low-cost methodology for estimating a conservative value of the maximum field level that can be radiated by a 5G base station useful for human exposure assessment. The method is based on a Maximum Power Extrapolation (MPE) approach and requires the measurement of a reference quantity associated with the SS-PBCH, such as Primary Synchronization Signal (PSS), Secondary Synchronization Signal (SSS), Physical Broadcast CHannel (PBCH), or PBCH Demodulation Reference Signal (PBCH-DMRS). This step requires a simple spectrum analyzer and allows one to obtain the Resource Element (RE) power of a signal transmitted through broadcast beams. In the second phase, the RE power of the signal transmitted through the traffic beam is estimated using the Cumulative Distribution Function (CDF) of the antenna boost factor obtained from the broadcast and the traffic envelope radiation patterns made available by the base station vendor. The use of the CDF allows us to mitigate the problems related to the exact estimation of the direction of the measurement point with respect to the beam of the 5G antenna. The method is applied to a real 5G communication system, and the result is compared with the value given by other MPE methods proposed in the literature. Full article
Show Figures

Figure 1

Back to TopTop