General
A section of Applied Sciences (ISSN 2076-3417).
Section Information
This section is open for all submissions within the scope of the journal and fields not covered by the specific journal section.
Editorial Board
Special Issues
Following special issues within this section are currently open for submissions:
- Advanced Finite Element Analysis and Fracture Control in Steel Pipelines Under Hydrogen Influence (Deadline: 10 May 2025)
- Advanced Geomaterials and Reinforced Structures (Second Edition) (Deadline: 20 May 2025)
- Novel Technologies in Intelligent Coal Mining (Deadline: 20 May 2025)
- Novel Approaches and Applications in Ergonomic Design III (Deadline: 20 May 2025)
- Smart Sensors and Devices: Recent Advances and Applications Second Edition (Deadline: 30 May 2025)
- Selected Papers from the 5th International Electronic Conference on Applied Sciences (Deadline: 31 May 2025)
- Sustainability in the Mechanism and Prevention of Coal-Rock Dynamic Disaster and Rock Engineering (Deadline: 31 May 2025)
- Leveraging Digital Transformation for Enhanced Occupational Health and Safety in Manufacturing (Deadline: 20 June 2025)
- Advanced Communication and Networking Technology for Smart Grid (Deadline: 20 June 2025)
- Advances in Machine Learning and Big Data Analytics (Deadline: 20 June 2025)
- The Wide Range Use of Innovative Technologies in Industry 4.0/5.0 and IoT (Deadline: 20 June 2025)
- Advances in Performance Monitoring and Anomaly Detection across Structures and Industrial Processes (Deadline: 30 June 2025)
- Applications of Data Mining in Bioinformatics (Deadline: 30 June 2025)
- Multiagent Systems and Control (Deadline: 30 June 2025)
- Sports Performance: Data Measurement, Analysis and Improvement (Deadline: 20 July 2025)
- Intelligent Mobile Crowdsensing (Deadline: 20 July 2025)
- Advances in Thermochemical Biomass Conversion Technologies (Deadline: 20 July 2025)
- New Findings in Visual Communications on Visibility or Legibility in Different Media (Deadline: 20 July 2025)
- The Intrusion Detection and Intrusion Prevention Systems (Deadline: 30 July 2025)
- Advancements and Applications in Reinforcement Learning (Deadline: 30 July 2025)
- Fuzzy Optimization Method and Application (Deadline: 31 July 2025)
- Natural and Synthetic Pharmaceutical Ingredients: Physico-Chemical Characterization and Drug Development (Deadline: 31 July 2025)
- Children's Exercise Medicine: Bridging Science and Healthy Futures (Deadline: 20 August 2025)
- Advances in Photoacoustic and Photothermal Phenomena (Deadline: 20 August 2025)
- Advances in Energy Dissipation Systems (Deadline: 20 August 2025)
- Hydrocolloids: Basics and Applications in the Food Industry (Deadline: 20 August 2025)
- Towards Industry 5.0: Enabling Technologies, Challenges and Research Opportunities (Deadline: 20 August 2025)
- Innovations in Forensic Sciences: Advancing Investigations through Multidisciplinary Approaches (Deadline: 20 August 2025)
- Recent Developments in Endodontics and Dental Materials (Deadline: 20 August 2025)
- AI Technologies Applied to Energy Systems and Smart Grids (Deadline: 20 August 2025)
- Novel Advances in Biomedical Signal and Image Processing (Deadline: 20 August 2025)
- Non-Destructive Techniques for Heritage Conservation (Deadline: 30 August 2025)
- Wireless Communication in Clinical Medicine (Deadline: 31 August 2025)
- Advances in Sustainable Pavement and Road Construction: Innovations with Asphalt and Recycled Materials (Deadline: 31 August 2025)
- Intelligent Techniques and 3D Virtual Reconstruction for Architectural Heritage (Deadline: 10 September 2025)
- Remote Sensing Applications in Agricultural, Earth and Environmental Science, 2nd Edition (Deadline: 20 September 2025)
- Plant Secondary Metabolism and Metabolite Applications (Deadline: 20 September 2025)
- Natural Antioxidant in Foods (Deadline: 20 September 2025)
- Mineral Carbonation for Carbon Dioxide Removal (Deadline: 20 September 2025)
- Advances in Ocean Acoustics (Deadline: 30 September 2025)
- Industrial Safety and Occupational Health Engineering (Deadline: 30 September 2025)
- Recent Advances in Natural Phenolic Compounds Derived from Plant Extracts (Deadline: 20 October 2025)
- Advanced Manufacturing of Smart Materials (Deadline: 20 October 2025)
- Advances in Intelligent Information Systems and AI Applications—2nd Edition (Deadline: 20 October 2025)
- Recent Advances in Field-Programmable Gate Arrays (FPGAs) (Deadline: 20 October 2025)
- Geochemistry of Contaminated Soils and Sediments (Deadline: 20 October 2025)
- Application of Intelligent Systems in Poultry Farming (Deadline: 20 October 2025)
- Computer Vision Methods for Motion Control and Analysis (Deadline: 20 October 2025)
- Emerging Methods and Tools for Production Systems’ Design and Management in the Mass Customization Era, 2nd Edition (Deadline: 20 October 2025)
- Innovations in Dental Implants and Prosthodontics (Deadline: 25 October 2025)
- New Insights into Optimal Control and Applications in Automotive Engineering (Deadline: 31 October 2025)
- Advanced Microbial Technologies in Water and Wastewater Treatment (Deadline: 31 October 2025)
- Innovations and Advances in Textile Recycling: Towards a Sustainable Circular Economy (Deadline: 31 October 2025)
- Advanced Mobile Robots: Researches and Applications (Deadline: 31 October 2025)
- Recent Advances in Experimental Mechanics (Deadline: 31 October 2025)
- Advances in Oral Rehabilitation: Materials, Techniques and Clinical Applications: 2nd Edition (Deadline: 20 November 2025)
- Recent Developments in Wearable Sensors for Human Locomotion Monitoring (Deadline: 20 November 2025)
- Data-Driven Supply Chain Management and Logistics Engineering (Deadline: 23 November 2025)
- Reservoir to Recovery: Advancing Sustainable Practices in Conventional Oil and Gas Exploration (Deadline: 20 December 2025)
- Cyber–Physical System: Security and Defense (Deadline: 25 December 2025)
- Biomechanics and Performance Assessment in Paralympic Sports and Adapted Physical Activity (Deadline: 25 December 2025)
- Embodied Intelligence and Its Application in Robotics (Deadline: 30 December 2025)
- Industrial System Reliability Modeling and Optimization (Deadline: 31 December 2025)
- Applied Biomechanics for Sport Sciences (Deadline: 31 January 2026)
- Selected Papers from the 6th International Electronic Conference on Applied Sciences (Deadline: 31 March 2026)
Topical Collection
Following topical collection within this section is currently open for submissions:
