- Article
A series of creep–fatigue tests of Gr.91 steel were performed at 600 °C. Fatigue life was reduced by tensile strain holding. The minimum life reduction factor was approximately 0.3. The creep–fatigue life could not be estimated proper...
A series of creep–fatigue tests of Gr.91 steel were performed at 600 °C. Fatigue life was reduced by tensile strain holding. The minimum life reduction factor was approximately 0.3. The creep–fatigue life could not be estimated proper...
This paper presents the high-temperature creep-fatigue testing of a Ni-based superalloy of Alloy 617 base metal and weldments at 900 °C. Creep-fatigue tests were conducted with fully reversed axial strain control at a total strain range of 0.6%, 1.2%...
We used the Green’s function summation method together with the randomly perturbed asperity sources to sum up broadband statistical Green’s functions of a moderate-size source and predict strong ground motions due to the expected M8.1 to 8.7 Nankai-T...
The following paper presents the results of tests on samples made of P91 steel under the conditions of simultaneously occurring fatigue and creep at a temperature of 600 °C. The load program consisted of symmetrical fatigue cycles with tensile dw...
This work investigates methods for predicting low-cycle fatigue life by employing new energy-based fatigue damage measures. The primary goal of this research is to evaluate whether fatigue life can be predicted based on an energy accumulation graph,...
The issues of durability and fatigue life of various structural materials occupy an important place in the operation of equipment and elements subjected to high stresses. To correctly predict its operation time, knowledge of the unique internal struc...
This study proposes an integrated fatigue life assessment methodology to accurately evaluate the time-domain evolution in tubular joint fatigue damage in offshore wind turbine (OWT) jacket structures under long-term combined wind and wave actions. A...
Testing and the estimation methods for predicting the life of crack initiation and crack growth for P92 steel using a circular sharp notched round bar specimen (CNS) under strain-controlled creep and fatigue conditions have been reported previously....
This article examines the problem of assessing the reliability of stamped-welded freight car bogie components based on fatigue strength criteria under operational loads. The theoretical framework utilizes the principles of the linear fatigue damage s...