|
|
1. “Simulation Analysis of Energy Inputs Required by Agricultural Machines to Perform Field Operations”
by Francesco Paciolla, Katarzyna Łyp-Wrońska, Tommaso Quartarella and Simone Pascuzzi
AgriEngineering 2025, 7(1), 7; https://doi.org/10.3390/agriengineering7010007 |
 |
2. “Precision Monitoring of Dead Chickens and Floor Eggs with a Robotic Machine Vision Method”
by Xiao Yang, Jinchang Zhang, Bidur Paneru, Jiakai Lin, Ramesh Bahadur Bist, Guoyu Lu and Lilong Chai
AgriEngineering 2025, 7(2), 35; https://doi.org/10.3390/agriengineering7020035 |
 |
3. “Mechanical Harvesting of Olive Orchards: An Overview on Trunk Shakers”
by Gaetano Messina, Matteo Sbaglia and Bruno Bernardi
AgriEngineering 2025, 7(3), 52; https://doi.org/10.3390/agriengineering7030052 |
 |
4. “Using Drones to Predict Degradation of Surface Drainage on Agricultural Fields: A Case Study of the Atlantic Dykelands”
by Mathieu F. Bilodeau, Travis J. Esau, Qamar U. Zaman, Brandon Heung and Aitazaz A. Farooque
AgriEngineering 2025, 7(4), 112; https://doi.org/10.3390/agriengineering7040112 |
 |
5. “Operational and Cost Assessment of Mechanizing Soil Removal Between Peach Trees Planted on Raised Berms”
by Coleman Scroggs, Ali Bulent Koc, Guido Schnabel and Michael Vassalos
AgriEngineering 2025, 7(5), 144; https://doi.org/10.3390/agriengineering7050144 |
 |
6. “Machine Learning for Precision Agriculture: Predicting Persimmon Peak Harvest Dates and Yield Using Meteorological Data”
by Atsushi Okayama, Atsushi Yamamoto, Yutaka Matsuno and Masaomi Kimura
AgriEngineering 2025, 7(6), 180; https://doi.org/10.3390/agriengineering7060180 |
 |
7. “Stone Detection on Agricultural Land Using Thermal Imagery from Unmanned Aerial Systems”
by Florian Thürkow, Mike Teucher, Detlef Thürkow and Milena Mohri
AgriEngineering 2025, 7(7), 203; https://doi.org/10.3390/agriengineering7070203 |
 |
8. “Field Spectroscopy for Monitoring Nitrogen Fertilization and Estimating Cornstalk Nitrate Content in Maize”
by Jesús Val, Iván González-Pérez, Enoc Sanz-Ablanedo, Ángel Maresma and José Ramón Rodríguez-Pérez
AgriEngineering 2025, 7(8), 264; https://doi.org/10.3390/agriengineering7080264 |
 |
9. “Reducing Within-Vineyard Spatial Variability Through Real-Time Variable-Rate Fertilization: A Case Study in the Conegliano Valdobbiadene Prosecco DOCG Region”
by Marco Sozzi, Davide Boscaro, Alessandro Zanchin, Francesco Marinello and Diego Tomasi
AgriEngineering 2025, 7(9), 280; https://doi.org/10.3390/agriengineering7090280 |
 |
10. “Quantum and Nonlinear Metamaterials for the Optimization of Greenhouse Covers”
by Chrysanthos Maraveas
AgriEngineering 2025, 7(10), 334; https://doi.org/10.3390/agriengineering7100334 |
 |
11. “A Soft Robotic Gripper for Crop Harvesting: Prototyping, Imaging, and Model-Based Control”
by Yalun Jiang and Javad Mohammadpour Velni
AgriEngineering 2025, 7(11), 378; https://doi.org/10.3390/agriengineering7110378 |
 |
12. “Design of Fruit Harvesting Robot System Based on a Reachability and Inverse Reachability Map”
by Jae-Woong Han, Jae-Hoon Cho and Yong-Tae Kim
AgriEngineering 2025, 7(12), 417; https://doi.org/10.3390/agriengineering7120417 |
